Re: GRUB2 git repo

[Naresh Bhat]

Thank you very much Colin.

Hi All,

I am able to boot my machine with linux kernel 2.6.32.28 from EFI shell after following the instructions http://grub.enbug.org/TestingOnMacbook

Plug-in the USB stick on EFI firmware/Shell supported x86 32bit target board. Edit the BIOS and change the boot priority to EFI shell. After target is booted on EFI shell execute the below commands

Shell> fs1:

fs1:\> cd efi

fs1:\efi> cd grub

fs1:\efi\grub> grub.efi

grub> set debug=video

grub> insmod efi_gop

grub> boot

But when I created a grub.cfg file and try to boot, my machine will show 

"video/efi_gop:357: GOP: Sucess"

and hangs......

Any idea what is wrong with grub.cfg file or with my USB disk partitions ?

My grub.cfg file contents are as below

============================================

set debug=video

insmod efi_gop

menuentry "Linux Kernel-2.6.32.28 (Single Image)" {

linux (hd2,gpt2)/bzImage

}

menuentry "Linux-2.6.32.28 Kernel with custom ramdisk image" {

linux (hd2,gpt2)/bzImage

initrd (hd2,gpt2)/ramdisk.img

}

===============================================================================

My USB disk partitions are as below

================================================================================

Lenovo-Y310 nareshbhat # parted /dev/sdb

GNU Parted 2.3

Using /dev/sdb

Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) p                                                                

Model: Kingston DataTraveler G2 (scsi)

Disk /dev/sdb: 2000MB

Sector size (logical/physical): 512B/512B

Partition Table: gpt

Number  Start   End     Size   File system     Name  Flags

 1      1049kB  744MB   743MB  fat32

 2      744MB   1585MB  841MB  ext2

 3      1585MB  1999MB  413MB  linux-swap(v1)

(parted)

==================================================================================

Thanks in Advance!!

-Naresh Bhat

On Tue, Apr 5, 2011 at 7:48 PM, Colin Watson <address@hidden> wrote:

On Tue, Apr 05, 2011 at 07:19:51PM +0530, Naresh Bhat wrote:
> I wanted to checkout the GRUB2 git repository. Can somebody please provide
> me the correct link ?

GRUB is maintained in Bazaar, not git.  Instructions are here:

 http://www.gnu.org/software/grub/grub-download.en.html

--
Colin Watson                                       [address@hidden]

_______________________________________________
Grub-devel mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/grub-devel