Re: PCI+ATA

[walt]

On Sun, 2008-02-03 at 09:42 -0800, walt wrote:
> Marco Gerards wrote:
> > Hi,
> >
> > Here is a patch for testing purposes.  I hope people can test this on
> > actual hardware.  Testing will help a lot for the development of the
> > ATA driver.
> > ...
> > Please tell me (read this before testing!):
> >
> > 1) Does it work perfectly (yes/no) as in, all devices are detected and
> >     can be accessed.  If no: what's the problem.
> ...
> I'll also try the patch on my other machine, which has a promise sata
> controller.

This is the machine with the sata controller and sata disk:

ata.c:470: PCI dev (0,17,1) compat=0 rega=1f0 regb=3f6
ata.c:339: detecting device 0,0 (1f0, 3f6)
ata.c:376: Registers: 1 1 00
ata.c:397: ATA detected
<prints out model, firmware, sectors correctly for the pata drive>
ata.c:339: detecting device 0,1 (1f0, 3f6)
ata.c:376: Registers: 1 1 00
ata.c:397: ATA detected  <==== I'm guessing this is the sata drive.
<hangs forever>