[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] How to use ubxtool with gpsd
From: |
Gary E. Miller |
Subject: |
Re: [gpsd-users] How to use ubxtool with gpsd |
Date: |
Wed, 31 Oct 2018 15:59:54 -0700 |
Yo John!
On Wed, 31 Oct 2018 22:40:39 +0000
John Klug <address@hidden> wrote:
> Here is my gpsd command line:
>
> /usr/sbin/gpsd -n -D 1 -F /var/run/gpsd.sock -P /var/run/gpsd.pid
> /dev/ttyXRUSB2 /dev/pps0
Why do you need to specify the /dev/pps0? Why do you use gpsd.sock AND
the tty?
> gps0:/home/mtadm# ubxtool -p PMS
> ubxtool: poll PMS
> sent:
> UBX-CFG-PMS:
> Poll request
>
> {"class":"ERROR","message":"No path specified in DEVICE, but multiple
> devices are attached."}
Hmm, I guess is should default the first device, you have at least two.
New tool, still kinks to work out.
> gps0:/home/mtadm# ubxtool -p PMS 127.0.0.1:2947:/dev/ttyXRUSB0
> ubxtool: poll PMS
> sent:
> UBX-CFG-PMS:
> Poll request
>
> {"class":"ERROR","message":"No such device as /dev/ttyXRUSB0"}
> {"class":"ERROR","message":"Can't open /dev/ttyXRUSB0."}
Use gpspipe to see what devices you have. Clearly not that one.
You have a ttyXRUSB0 and a ttyXRUSB2? You use both above.
# gpspipe -w -n 20 | fgrep DEVICE
{"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyACM0","driver":"u-blox","subtype":"SW
ROM CORE 3.01 (107888),HW 00080000,FWVER=SPG
3.01,PROTVER=18.00,GPS;GLO;GAL;BDS,SBAS;IMES;QZ","activated":"2018-10-31T22:59:32.047Z","flags":1,"native":1,"bps":9600,"parity":"N","stopbits":1,"cycle":1.00,"mincycle":0.25}]}
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
pgpaPkvfudEfR.pgp
Description: OpenPGP digital signature