Re: [gpsd-users] Using "gpsctl -x" while gpsd is running

[Gary E. Miller]

Yo Joshua!

On Wed, 12 Jul 2017 13:35:12 -0400
"Joshua Quesenberry" <address@hidden> wrote:

> Is there a way to use gpsctl to run a command on the GPS receiver
> while the GPS receiver is captured by gpsd?

Sure.

> I'm trying to change the rate of uBlox device using the command:
> gpsctl -t u-blox -x '\x06\x08\xC8\x00\x01\x00\x01\x00' /dev/gps0

Which is fine, until gpsd has the port.

Once gpsd has captured the GPS on the port, it already knows the
type and port, so try just:

    gpsctl -x '\x06\x08\xC8\x00\x01\x00\x01\x00'

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

pgpo6a4pADa_e.pgp
Description: OpenPGP digital signature