[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] problem while running gpsd with u-blox M8P
From: |
Gary E. Miller |
Subject: |
Re: [gpsd-users] problem while running gpsd with u-blox M8P |
Date: |
Thu, 22 Sep 2016 09:53:57 -0700 |
Yo Jorick!
On Thu, 22 Sep 2016 17:23:40 +0200
Jorick Astrego <address@hidden> wrote:
> We are experiencing a problem with gpsd and a u-blox M8P (RTK)
>
> After a irregular interval we get an error:
>
> "Driver type switch failed"
>
> In gpsmon, I can see an error about Trimble TSIP.
Something caused gpsd to think it lost lock with the GPS serial stream.
> I also see "usb 2-4: ep 0x83 - rounding interval to 1024 microframes,
> ep desc says 2040 microframes" in the dmesg at that point.
You running a u-blox over USB? That is a USB hiccup, rarely does it
cause problems.
> Somebody know what could be happening?
USB problem? Can you send a 'cat' of the GPS data when the glitch happens?
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
pgpEDFeM5dmd7.pgp
Description: OpenPGP digital signature
Re: [gpsd-users] problem while running gpsd with u-blox M8P,
Gary E. Miller <=