[gpsd-users] gps setup fails

[Eugene B Imes]

Aug 21 15:43:18 go kernel: usb 1-1: new full-speed USB device number 13
using xhci_hcd
Aug 21 15:43:18 go kernel: usb 1-1: New USB device found,
idVendor=1546, idProduct=01a7
Aug 21 15:43:18 go kernel: usb 1-1: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
Aug 21 15:43:18 go kernel: usb 1-1: Product: u-blox 7 - GPS/GNSS
Receiver
Aug 21 15:43:18 go kernel: usb 1-1: Manufacturer: u-blox AG - www.u-blo
x.com
Aug 21 15:43:18 go kernel: cdc_acm 1-1:1.0: ttyACM0: USB ACM device
Aug 21 15:43:18 go mtp-probe[12993]: checking bus 1, device 13:
"/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1"
Aug 21 15:43:18 go mtp-probe[12993]: bus: 1, device: 13 was not an MTP
device
Aug 21 15:43:18 go gpsd.hotplug[12998]: add /dev/ttyACM0
Aug 21 15:43:18 go gpsdctl[13000]: gpsd_control(action=add,
arg=/dev/ttyACM0)
Aug 21 15:43:18 go gpsdctl[13000]: launching gpsd -D 9 -F
/var/run/gpsd.sock
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: launching (Version 3.16)
Aug 21 15:43:18 go gpsd[13003]: gpsd:IO: opening IPv4 socket
Aug 21 15:43:18 go gpsd[13003]: gpsd:SPIN: passivesock_af() -> 5
Aug 21 15:43:18 go gpsd[13003]: gpsd:IO: opening IPv6 socket
Aug 21 15:43:18 go gpsd[13003]: gpsd:SPIN: passivesock_af() -> 6
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: listening on port 2947
Aug 21 15:43:18 go gpsd[13003]: gpsd:PROG: successfully connected to
the DBUS system bus
Aug 21 15:43:18 go gpsd[13003]: gpsd:PROG: shmget(0x47505344, 8936,
0666) for SHM export succeeded
Aug 21 15:43:18 go gpsd[13003]: gpsd:PROG: shmat() for SHM export
succeeded, segment 54231087
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: running with effective group
ID 14
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: running with effective user
ID 119
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: startup at 2016-08-
21T20:43:18.000Z (1471812198)
Aug 21 15:43:18 go gpsd[13003]: gpsd:SPIN: select() {3 5 6} -> { 3 } at
1471812198.857642 (errno 0)
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: control socket connect on fd
9
Aug 21 15:43:18 go gpsd[13003]: gpsd:CLIENT: <= control(9):
+/dev/ttyACM0\x0d\x0a
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: <= control(9): adding
/dev/ttyACM0
Aug 21 15:43:18 go gpsd[13003]: gpsd:INFO: stashing device /dev/ttyACM0
at slot 0
Aug 21 15:43:18 go gpsd[13003]: gpsd:SPIN: close(9) of control socket

At this poing gpsd has started and stopped.

Tell me what information I can supply.

Thanks,

Gene