[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gpsd-commit-watch] [SCM] GPSD branch, master, updated. release-3.5-52-g
From: |
Eric S. Raymond |
Subject: |
[gpsd-commit-watch] [SCM] GPSD branch, master, updated. release-3.5-52-g7e79679 |
Date: |
Tue, 01 May 2012 22:12:15 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GPSD".
The branch, master has been updated
via 7e796793aa45752d93566099f5e31ed1391bf8c0 (commit)
from 5de90d2a76140fa7bd9b2e661dfba725e465c7ef (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 7e796793aa45752d93566099f5e31ed1391bf8c0
Author: Eric S. Raymond <address@hidden>
Date: Tue May 1 18:11:25 2012 -0400
Allow use of the CTS line for NNTP.
Nathan Knotts wrote: "I'm currently using the Xtreme104 12 port serial
board which only has the CTS handshaking lines exposed. Previous gpsd
releases had support for the cts handshaking pin via compile time
options, then later, command line options. As of release 3.5, these
options have been removed and automatic detection occurs. However,
the bitmask defining which control lines to listen to (PPS_LINE_TIOC)
does not include the CTS line. I've added TIOCM_CTS to that bitmask to
include CTS capability. This has been tested to work with a ublox chip
outputting NMEA."
-----------------------------------------------------------------------
Summary of changes:
ntpshm.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
hooks/post-receive
--
GPSD
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [gpsd-commit-watch] [SCM] GPSD branch, master, updated. release-3.5-52-g7e79679,
Eric S. Raymond <=