[GNUnet-SVN] [gnunet-texinfo] 01/02: a few errors fixed

[gnunet]

This is an automated email from the git hooks/post-receive script.

ng0 pushed a commit to branch master
in repository gnunet-texinfo.

commit 9fe554ea363446a22bc93596f2d7c8d7613ed172
Author: Adriano Peluso <address@hidden>
AuthorDate: Thu May 18 05:31:52 2017 +0200

    a few errors fixed
---
 developer.texi    | 56 +++++++++++++++++++++++++++----------------------------
 installation.texi | 32 +++++++++++++++----------------
 user.texi         |  8 ++++----
 3 files changed, 48 insertions(+), 48 deletions(-)

diff --git a/developer.texi b/developer.texi
index 40c96ec..dcd4401 100644
--- a/developer.texi
+++ b/developer.texi
@@ -43,8 +43,8 @@ however, few people would want to read this site if 99% of it 
was
 advertisements for bogus websites.
 
 @c ***************************************************************************
address@hidden Introduction
address@hidden Introduction
address@hidden DevelperIntroduction
address@hidden DeveloperIntroduction
 
 This developer handbook is intended as first introduction to GNUnet for new
 developers that want to extend the GNUnet framework. After the introduction,
@@ -2749,8 +2749,8 @@ that are going to run.@
 @end table
 
 @c ***************************************************************************
address@hidden Availability
address@hidden Availability
address@hidden Availability2
address@hidden Availability2
 @c %**end of header
 
 As mentioned before, one of the features provided by ARM is starting services
@@ -3049,7 +3049,7 @@ in 0.7.x and 0.8.x) in more detail and gives some 
benchmarking results. The
 performance results presented are quite old and maybe outdated at this point.
 @itemize @bullet
 @item Why use SMTP for a peer-to-peer transport?
address@hidden How does it work?
address@hidden SMTPHow does it work?
 @item How do I configure my peer?
 @item How do I test if it works?
 @item How fast is it?
@@ -3232,7 +3232,7 @@ is still in the testing stage so don't expect it to work 
perfectly. If you
 have any questions or problems just post them here or ask on the IRC channel.
 @itemize @bullet
 @item What do I need to use the Bluetooth plugin transport?
address@hidden How does it work?
address@hidden BluetoothHow does it work?
 @item What possible errors should I be aware of?
 @item How do I configure my peer?
 @item How can I test it?
@@ -3261,8 +3261,8 @@ installed and that your device is on and in a 
discoverable mode. The Windows
 Bluetooth Stack supports only the RFCOMM protocol so we cannot turn on your
 device programatically!
 
address@hidden How does it work?
address@hidden How does it work?
address@hidden How does it work2?
address@hidden How does it work2?
 @c %**end of header
 
 The Bluetooth transport plugin uses virtually the same code as the WLAN plugin
@@ -3325,8 +3325,8 @@ device and to send some particular commands to it.
 @item @code{hcidump} : could be used for low level debugging
 @end itemize
 
address@hidden How do I configure my peer?
address@hidden How do I configure my peer?
address@hidden How do I configure my peer2?
address@hidden How do I configure my peer2?
 @c %**end of header
 
 On Linux, you just have to be sure that the interface name corresponds to the
@@ -3813,8 +3813,8 @@ re-established, the applications will be receive matching 
connect events.
 This section describes the protocol between an application using the CORE
 service (the client) and the CORE service process itself.
 
address@hidden Setup
address@hidden Setup
address@hidden Setup2
address@hidden Setup2
 @c %**end of header
 
 When a client connects to the CORE service, it first sends a
@@ -4289,8 +4289,8 @@ standard deviation value, not only the average (in 
particular, if the standard
 veriation is very high, the average maybe meaningless: the network size is
 changing rapidly).
 
address@hidden Examples
address@hidden Examples
address@hidden Examples2
address@hidden Examples2
 @c %**end of header
 
 Let's close with a couple examples.
@@ -4455,8 +4455,8 @@ gossip
 @item automatically learn about hostlist servers from the gossip of other peers
 @end itemize
 
address@hidden Limitations
address@hidden Limitations
address@hidden Limitations2
address@hidden Limitations2
 @c %**end of header
 
 The HOSTLIST daemon does not:
@@ -4929,8 +4929,8 @@ subsystems tend to need to store per-peer information in 
persistent way. To not
 duplicate this functionality we plan to provide a PEERSTORE service providing
 this functionality
 
address@hidden Features
address@hidden Features
address@hidden Features2
address@hidden Features2
 @c %**end of header
 
 @itemize @bullet
@@ -4940,15 +4940,15 @@ this functionality
 @item Differentiation between public and friend-only HELLO
 @end itemize
 
address@hidden Limitations
address@hidden Limitations
address@hidden Limitations3
address@hidden Limitations3
 
 @itemize @bullet
 @item Does not perform HELLO validation
 @end itemize
 
address@hidden Peer Information
address@hidden Peer Information
address@hidden DeveloperPeer Information
address@hidden DeveloperPeer Information
 @c %**end of header
 
 The PEERINFO subsystem stores these information in the form of HELLO messages
@@ -5082,8 +5082,8 @@ operation allowing to cancel the operation with the 
respective cancel function
 you can iterate over all information stored with PEERINFO or you can tell
 PEERINFO to notify if new peer information are available.
 
address@hidden Obtaining Information
address@hidden Obtaining Information
address@hidden Obtaining Information2
address@hidden Obtaining Information2
 @c %**end of header
 
 To iterate over information in PEERINFO you use @code{GNUNET_PEERINFO_iterate}.
@@ -5343,8 +5343,8 @@ are created by sending the 
@code{GNUNET_SERVICE_SET_CREATE} message over a new
 client connection. Multiple operations for one set are multiplexed over one
 client connection, using a request id supplied by the client.
 
address@hidden Listeners
address@hidden Listeners
address@hidden Listeners2
address@hidden Listeners2
 @c %**end of header
 
 Each listener also requires a seperate client connection. By sending the
@@ -5620,8 +5620,8 @@ are used for registering the watch.
 @node The STATISTICS Client-Service Protocol
 @c %**end of header
 
address@hidden Statistics retrieval
address@hidden Statistics retrieval
address@hidden Statistics retrieval2
address@hidden Statistics retrieval2
 @c %**end of header
 
 To retrieve statistics, the client transmits a message of type
diff --git a/installation.texi b/installation.texi
index f2af005..12a2750 100644
--- a/installation.texi
+++ b/installation.texi
@@ -1154,8 +1154,8 @@ you might simply already have some of the necessary 
packages installed. Thus,
 it is suggested that you simply install the desktop environment of your choice
 before beginning with the instructions.
 
address@hidden Update
address@hidden Update
address@hidden Update2
address@hidden Update2
 
 After any installation, you should begin by running@
 @code{@
@@ -1167,8 +1167,8 @@ to indicate that you need to type in this command as 
"root" (or prefix with
 "sudo"), whereas "$" is used to indicate typing in a command as a normal
 user.
 
address@hidden Installing Packages
address@hidden Installing Packages
address@hidden Installing Packages2
address@hidden Installing Packages2
 
 We begin by installing a few Debian packages from stable:@
 @example
@@ -1184,8 +1184,8 @@ We begin by installing a few Debian packages from stable:@
   libmicrohttpd-dev
 @end example
 
address@hidden Installing Dependencies from Source
address@hidden Installing Dependencies from Source
address@hidden Installing Dependencies from Source2
address@hidden Installing Dependencies from Source2
 
 Yes, we said we start with a Debian 8 "stable" system, but because Debian
 linked GnuTLS without support for DANE, we need to compile a few things, in
@@ -1215,14 +1215,14 @@ sources, and finally compiling and installing the 
libraries:@
  $ make ; sudo make install; cd ..@
 }
 
address@hidden Installing GNUnet from Source
address@hidden Installing GNUnet from Source
address@hidden Installing GNUnet from Source2
address@hidden Installing GNUnet from Source2
 
 For this, simply follow the generic installation instructions from@
 here.
 
address@hidden But wait, there is more!
address@hidden But wait, there is more!
address@hidden But wait (again), there is more!
address@hidden But wait (again), there is more!
 
 So far, we installed all of the packages and dependencies required to ensure
 that all of GNUnet would be built. However, while for example the plugins to
@@ -2976,8 +2976,8 @@ settings. Just specify the interface to use:@
 @node User Manual for the wlan transport plugin
 @subsubsection User Manual for the wlan transport plugin
 
address@hidden Introduction
address@hidden Introduction
address@hidden Introduction2
address@hidden Introduction2
 
 The wlan transport plugin enables GNUnet to send and to receive data on a wlan
 interface. It has not to be connected to a wlan network as long as sender and
@@ -2985,8 +2985,8 @@ receiver are on the same channel. This enables you to get 
connection to the
 GNUnet where no internet access is possible, for example while catastrophes or
 when censorship cuts you off the internet.
 
address@hidden Requirements
address@hidden Requirements
address@hidden Requirements2
address@hidden Requirements2
 
 @itemize @bullet
 
@@ -3492,8 +3492,8 @@ Note that the proxy uses libcurl. Make sure your version 
of libcurl uses GnuTLS
 and NOT OpenSSL. The proxy will not work with libcurl compiled against
 OpenSSL.
 
address@hidden Testing
address@hidden Testing
address@hidden Testing2
address@hidden Testing2
 
 Now for testing purposes we can create some records in our zone to test the SSL
 functionality of the proxy:@
diff --git a/user.texi b/user.texi
index 04dc210..89f5a60 100644
--- a/user.texi
+++ b/user.texi
@@ -8,8 +8,8 @@ outside of the scope of this tutorial. Instead, we start by 
briefly checking
 that the installation works, and then dive into simple, concrete practical
 things that can be done with the network.
 
address@hidden Introduction
address@hidden Introduction
address@hidden UserIntroduction
address@hidden UserIntroduction
 
 This book documents how to use the various Peer-to-Peer applications of the
 GNUnet system. As GNUnet evolves, we will add new chapters for the various
@@ -510,8 +510,8 @@ automatically create the necessary records in the 
respective zone.
 @section First steps: Using the GNUnet VPN
 @c %**end of header
 
address@hidden Preliminaries
address@hidden Preliminaries
address@hidden Preliminaries2
address@hidden Preliminaries2
 @c %**end of header
 
 To test the GNUnet VPN, we should first run a web server. The easiest way to do

-- 
To stop receiving notification emails like this one, please contact
address@hidden