[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r1260 - in gnunet-gtk: libltdl src/core src/include src/plu
From: |
grothoff |
Subject: |
[GNUnet-SVN] r1260 - in gnunet-gtk: libltdl src/core src/include src/plugins/daemon |
Date: |
Mon, 4 Jul 2005 15:57:00 -0700 (PDT) |
Author: grothoff
Date: 2005-07-04 15:56:51 -0700 (Mon, 04 Jul 2005)
New Revision: 1260
Added:
gnunet-gtk/src/include/main.h
Removed:
gnunet-gtk/src/core/main.h
gnunet-gtk/src/plugins/daemon/daemon.h
Modified:
gnunet-gtk/libltdl/Makefile.in
gnunet-gtk/libltdl/install-sh
gnunet-gtk/libltdl/missing
gnunet-gtk/src/plugins/daemon/daemon.c
Log:
move
Modified: gnunet-gtk/libltdl/Makefile.in
===================================================================
--- gnunet-gtk/libltdl/Makefile.in 2005-07-04 22:54:14 UTC (rev 1259)
+++ gnunet-gtk/libltdl/Makefile.in 2005-07-04 22:56:51 UTC (rev 1260)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
+# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -37,6 +37,7 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
$(am__noinst_HEADERS_DIST) $(srcdir)/Makefile.am \
@@ -45,15 +46,20 @@
install-sh ltmain.sh missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltdl.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
-mkinstalldirs = $(mkdir_p)
+mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
libLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
@@ -61,19 +67,21 @@
libltdl_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
am_libltdl_la_OBJECTS = ltdl.lo
libltdl_la_OBJECTS = $(am_libltdl_la_OBJECTS)
address@hidden@am_libltdl_la_rpath = -rpath $(libdir)
libltdlc_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
am_libltdlc_la_OBJECTS = ltdl.lo
libltdlc_la_OBJECTS = $(am_libltdlc_la_OBJECTS)
address@hidden@am_libltdlc_la_rpath =
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES)
DIST_SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES)
@@ -175,6 +183,8 @@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
@@ -274,7 +284,7 @@
test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
+ f=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL)
$(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
$(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL)
$(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
else :; fi; \
@@ -282,8 +292,8 @@
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p="`echo $$p | sed -e 's|^.*/||'`"; \
+ @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ p=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
$(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
done
@@ -306,9 +316,9 @@
rm -f "$${dir}/so_locations"; \
done
libltdl.la: $(libltdl_la_OBJECTS) $(libltdl_la_DEPENDENCIES)
- $(LINK) -rpath $(libdir) $(libltdl_la_LDFLAGS) $(libltdl_la_OBJECTS)
$(libltdl_la_LIBADD) $(LIBS)
+ $(LINK) $(am_libltdl_la_rpath) $(libltdl_la_LDFLAGS)
$(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS)
libltdlc.la: $(libltdlc_la_OBJECTS) $(libltdlc_la_DEPENDENCIES)
- $(LINK) $(libltdlc_la_LDFLAGS) $(libltdlc_la_OBJECTS)
$(libltdlc_la_LIBADD) $(LIBS)
+ $(LINK) $(am_libltdlc_la_rpath) $(libltdlc_la_LDFLAGS)
$(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -339,7 +349,7 @@
test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
@list='$(include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
+ f=$(am__strip_dir) \
echo " $(includeHEADERS_INSTALL) '$$d$$p'
'$(DESTDIR)$(includedir)/$$f'"; \
$(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
done
@@ -347,7 +357,7 @@
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
+ f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
rm -f "$(DESTDIR)$(includedir)/$$f"; \
done
@@ -403,7 +413,6 @@
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
- $(mkdir_p) $(distdir)/..
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
@@ -436,15 +445,15 @@
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {}
\; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
- $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
- $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
@@ -457,7 +466,7 @@
$(am__remove_distdir)
dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
@@ -466,11 +475,11 @@
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
@@ -554,7 +563,7 @@
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
Modified: gnunet-gtk/libltdl/install-sh
===================================================================
--- gnunet-gtk/libltdl/install-sh 2005-07-04 22:54:14 UTC (rev 1259)
+++ gnunet-gtk/libltdl/install-sh 2005-07-04 22:56:51 UTC (rev 1260)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2004-04-01.17
+scriptversion=2005-02-02.21
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -58,9 +58,6 @@
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
@@ -70,23 +67,27 @@
src=
dst=
dir_arg=
+dstarg=
+no_target_directory=
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 -d DIRECTORIES...
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
Options:
--b=TRANSFORMBASENAME
--c copy source (using $cpprog) instead of moving (using $mvprog).
+-c (ignored)
-d create directories instead of installing files.
--g GROUP $chgrp installed files to GROUP.
--m MODE $chmod installed files to MODE.
--o USER $chown installed files to USER.
--s strip installed files (using $stripprog).
--t=TRANSFORM
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
@@ -96,14 +97,9 @@
while test -n "$1"; do
case $1 in
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
+ -c) shift
continue;;
- -c) instcmd=$cpprog
- shift
- continue;;
-
-d) dir_arg=true
shift
continue;;
@@ -113,7 +109,7 @@
shift
continue;;
- --help) echo "$usage"; exit 0;;
+ --help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
@@ -129,14 +125,20 @@
shift
continue;;
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
- --version) echo "$0 $scriptversion"; exit 0;;
+ -T) no_target_directory=true
+ shift
+ continue;;
+ --version) echo "$0 $scriptversion"; exit $?;;
+
*) # When -d is used, all remaining arguments are directories to create.
- test -n "$dir_arg" && break
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from
address@hidden
for arg
do
@@ -174,13 +176,13 @@
src=
if test -d "$dst"; then
- instcmd=:
+ mkdircmd=:
chmodcmd=
else
- instcmd=$mkdirprog
+ mkdircmd=$mkdirprog
fi
else
- # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
@@ -202,12 +204,16 @@
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
@@ -220,7 +226,8 @@
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
- set - `echo "$dstdir" | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
+ set x `echo "$dstdir" | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
+ shift
IFS=$oIFS
pathcomp=
@@ -229,51 +236,42 @@
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp" || lasterr=$?
+ $mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
- test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+ test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
- $doit $instcmd "$dst" \
+ $doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
- # If we're going to rename the final executable, determine the name now.
- if test -z "$transformarg"; then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename \
- | sed $transformarg`$transformbasename
- fi
+ dstfile=`basename "$dst"`
- # don't allow the sed command to completely eliminate the filename.
- test -z "$dstfile" && dstfile=`basename "$dst"`
-
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
- # Move or copy the file name to the temp name
- $doit $instcmd "$src" "$dsttmp" &&
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $instcmd $src $dsttmp" command.
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
@@ -298,7 +296,7 @@
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
+ (exit 1); exit 1
}
else
:
@@ -309,12 +307,12 @@
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
- fi || { (exit 1); exit; }
+ fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
- (exit 0); exit
+ (exit 0); exit 0
}
# Local variables:
Modified: gnunet-gtk/libltdl/missing
===================================================================
--- gnunet-gtk/libltdl/missing 2005-07-04 22:54:14 UTC (rev 1259)
+++ gnunet-gtk/libltdl/missing 2005-07-04 22:56:51 UTC (rev 1260)
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2003-09-02.23
+scriptversion=2005-02-08.22
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <address@hidden>, 1996.
@@ -60,12 +60,7 @@
msg="probably too old"
fi
;;
-esac
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
@@ -92,10 +87,12 @@
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <address@hidden>."
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
+ exit $?
;;
-*)
@@ -104,12 +101,42 @@
exit 1
;;
- aclocal*)
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
fi
+ ;;
+esac
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
@@ -119,11 +146,6 @@
;;
autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -133,11 +155,6 @@
;;
autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -157,11 +174,6 @@
;;
automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
@@ -173,11 +185,6 @@
;;
autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -254,11 +261,6 @@
;;
help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
@@ -279,11 +281,6 @@
;;
makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -291,20 +288,20 @@
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/address@hidden/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/address@hidden/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
touch $file
;;
tar)
shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
Deleted: gnunet-gtk/src/core/main.h
===================================================================
--- gnunet-gtk/src/core/main.h 2005-07-04 22:54:14 UTC (rev 1259)
+++ gnunet-gtk/src/core/main.h 2005-07-04 22:56:51 UTC (rev 1260)
@@ -1,37 +0,0 @@
-/*
- This file is part of GNUnet.
- (C) 2005 Christian Grothoff (and other contributing authors)
-
- GNUnet is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 2, or (at your
- option) any later version.
-
- GNUnet is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with GNUnet; see the file COPYING. If not, write to the
- Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-*/
-
-/**
- * @file src/main.h
- * @brief globals of gnunet-gtk
- * @author Christian Grothoff
- */
-
-#ifndef MAIN_H
-#define MAIN_H
-
-#include <gtk/gtk.h>
-#include <glade/glade.h>
-
-extern GladeXML * mainXML;
-
-extern char * gladeFile;
-
-#endif
Copied: gnunet-gtk/src/include/main.h (from rev 1259,
gnunet-gtk/src/core/main.h)
Modified: gnunet-gtk/src/plugins/daemon/daemon.c
===================================================================
--- gnunet-gtk/src/plugins/daemon/daemon.c 2005-07-04 22:54:14 UTC (rev
1259)
+++ gnunet-gtk/src/plugins/daemon/daemon.c 2005-07-04 22:56:51 UTC (rev
1260)
@@ -26,22 +26,11 @@
#include "platform.h"
-#include "daemon.h"
#include "main.h"
#include "helper.h"
#include <GNUnet/gnunet_util.h>
- addCronJob(&cronCheckDaemon,
- 0,
- 15 * cronSECONDS,
- NULL);
- delCronJob(&cronCheckDaemon,
- 15 * cronSECONDS,
- NULL);
-
-
-
/**
* Launch gnunetd w/ checks
*/
@@ -135,7 +124,7 @@
return FALSE;
}
-void cronCheckDaemon(void * dummy) {
+static void cronCheckDaemon(void * dummy) {
static int last = 42;
int ret;
@@ -146,4 +135,20 @@
}
}
+void __attribute__ ((constructor) daemon_ltdl_init(void) {
+ addCronJob(&cronCheckDaemon,
+ 0,
+ 15 * cronSECONDS,
+ NULL);
+}
+
+void __attribute__ ((destructor)) daemon_ltdl_fini(void) {
+ delCronJob(&cronCheckDaemon,
+ 15 * cronSECONDS,
+ NULL);
+}
+
+
+
+
/* end of daemon.c */
Deleted: gnunet-gtk/src/plugins/daemon/daemon.h
===================================================================
--- gnunet-gtk/src/plugins/daemon/daemon.h 2005-07-04 22:54:14 UTC (rev
1259)
+++ gnunet-gtk/src/plugins/daemon/daemon.h 2005-07-04 22:56:51 UTC (rev
1260)
@@ -1,33 +0,0 @@
-/*
- This file is part of GNUnet.
- (C) 2005 Christian Grothoff (and other contributing authors)
-
- GNUnet is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 2, or (at your
- option) any later version.
-
- GNUnet is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with GNUnet; see the file COPYING. If not, write to the
- Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-*/
-
-/**
- * @file src/daemon.h
- * @brief code for gnunet-gtk gnunetd interaction
- * @author Christian Grothoff
- */
-
-
-#ifndef GTK_DAEMON_H
-#define GTK_DAEMON_H
-
-void cronCheckDaemon(void * dummy);
-
-#endif
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r1260 - in gnunet-gtk: libltdl src/core src/include src/plugins/daemon,
grothoff <=