[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [GnuCOBOL-users] Need some pointers on migrating code and data
From: |
Simon Sobisch |
Subject: |
Re: [GnuCOBOL-users] Need some pointers on migrating code and data |
Date: |
Sat, 5 May 2018 21:24:49 +0200 |
User-agent: |
Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.7.0 |
Hi Laura,
> Date: Fri, 4 May 2018 14:35:12 -0400
> From: LM <address@hidden>
> On Fri, May 4, 2018 at 11:30 AM, Ron Norman <address@hidden> wrote:
>> VB-ISAM works fine... Make sure you have the 2.1.1 version or later.
>> Install or build VB-ISAM and then rebuild the GnuCOBOL compiler to use that.
Actually the best way to test an installed VBISAM version is to run
`make checkall` (= running both the internal and the NIST test suite)
after `configure --with-vbisam && make`.
Note: not all versions will have a full feature set but all versions
later than 2.0 should pass both testsuites.
If you change code within VBISAM you likely want to do `make` in
VBISAM's "tests" subdirectory.
Note: if you do any changes in VBISAM it is likely best to do `make
clean` there before re-running the tests after a change.
In general you should be able to use any program for testing C-ISAM
(though I'm not sure if you find more there).
>
> Where did you find the source code for 2.1.1?
>
> Sourceforge has 2.0 ( https://sourceforge.net/projects/vbisam/files/vbisam2/
> ).
> I also found vbisam 2.0.1 ( http://www.arnoldtrembley.com/GnuCOBOL.htm )
Ron adjusted the official VBISAM 2.0 sources, mainly for supporting DUPS
(returning the correct status on a duplicate secondary key) and for
SPARSE KEY support after discussing these items with me. He sent all the
sources and I try to get them on the official site within the next two
months.
Simon