RE: huawei e220 problem

[ASTI Patron, Oliver L.]

Hi Pawel,

Here is log error.

Timeout in file lowlevel.c, line 457, restarting connection.
Serial device: closing device
Opened configuration file /home/olpatron/.gnokiirc
Opened configuration file from memory
Added new section global
Adding key/value model/AT
Adding key/value port//dev/ttyUSB0
Adding key/value connection/serial
Adding key/value use_locking/yes
Adding key/value smsc_timeout/30
Added new section logging
Adding key/value debug/on
LOG: debug mask is 0x1
Config read from file /home/olpatron/.gnokiirc.
phone instance config:
model = AT
port = /dev/ttyUSB0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 30
rfcomm_channel = 1
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB0
Gnokii serial_open: open: No such file or directory
Couldn't open ATBUS device: No such file or directory
AT bus initialization failed (1)
Initialization failed (1)
Serial device: closing device
Telephone interface init failed: Command failed.
Quitting.
GSM/FBUS init failed! (Unknown model?). Quitting.
Command failed.

Here is the dmesg result.

[223012.941607] usb 1-5: USB disconnect, address 7
[223012.943289] option 1-5:1.0: device disconnected
[223012.943492] option1 ttyUSB1: GSM modem (1-port) converter now disconnected 
from ttyUSB1
[223012.960010] option 1-5:1.1: device disconnected
[223013.200017] usb 1-5: new high speed USB device using ehci_hcd and address 8
[223013.368114] usb 1-5: configuration #1 chosen from 1 choice
[223013.404071] usb-storage: probe of 1-5:1.0 failed with error -5
[223013.469219] usb 1-5: USB disconnect, address 8
[223018.276016] usb 1-5: new high speed USB device using ehci_hcd and address 9
[223018.442048] usb 1-5: configuration #1 chosen from 1 choice
[223018.476430] usb-storage: probe of 1-5:1.0 failed with error -5
[223018.476450] option 1-5:1.0: GSM modem (1-port) converter detected
[223018.476600] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[223018.484059] usb-storage: probe of 1-5:1.1 failed with error -5
[223018.484080] option 1-5:1.1: GSM modem (1-port) converter detected
[223018.484193] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[223018.492508] usb-storage: probe of 1-5:1.2 failed with error -1
[223018.503117] usb-storage: probe of 1-5:1.3 failed with error -1
[223022.925965] option1 ttyUSB0: GSM modem (1-port) converter now disconnected 
from ttyUSB0
Oliver L. Patron


-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Pawel Kot
Sent: Wednesday, March 30, 2011 10:18 PM
To: Discussion forum for gnokii users.
Subject: Re: huawei e220 problem

Hi,

On Wed, Mar 30, 2011 at 03:23, ASTI Patron, Oliver L.
<address@hidden> wrote:
> Here is the summary of the problem.
>
> I have been using gnokii for quite sometime and never get this error. But
> right now I am having trouble on how to get this done.
> The gnokii and smsd was used to Email2SMS alert for our team. But
> unfortunately the smsd stops because it cannot detect the huawei e220
> anymore and I never remove it since I attached it to the usb port.
>
> Here is the error of the smsd:
>
> gnokii I/O error: Input/output error
> lowlevel.c:461 error: 14, Device not ready.
>
> But right after I disconnect and reconnect the huawei USB it is detected
> again. If I leave it connected the same thing will happen.

What about anything more relevant? Including debug logs and dmesg output.

take care,
-- 
Pawel Kot

_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users


This message has been scanned for malware by Websense. www.websense.com