Re: Error message

[Pawel Kot]

Hi,

On Fri, Jul 16, 2010 at 14:25, monet nisperos
<address@hidden> wrote:
> Can someone please help me.  Iam getting this message after executing
> "gnokii --identify".  The actual problem is like it always pause for awhile
> after the write command before the "Message sent:"

I'm sorry I don't understand what the problem is and how is it related
to the log pasted below.

>  My model is AT,
> connection is serial, and port is /dev/ttyACMO.  The mobile phone I am using
> is Sony Ericsson W760.  It can be recognized by "dmesg" and "lsusb".
> Initializing AT capable mobile phone ...
> Serial device: opening device /dev/ttyACM0
> Serial device: setting RTS to high and DTR to high
> Message sent: 0x00 / 0x0004
> 41 54 5a 0d                                     | ATZ
> write: [ATZ<cr>]
> Message sent: 0x00 / 0x0005
> 41 54 45 31 0d                                  | ATE1
> write: [ATE1<cr>]
> Message sent: 0x00 / 0x000a
> 41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
> write: [AT+CMEE=1<cr>]
> Message sent: 0x06 / 0x0007
> 41 54 2b 47 4d 4d 0d                            | AT+GMM
> write: [AT+GMM<cr>]
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
> write: [AT+CGMM<cr>]
> Initialization failed (11)
> Serial device: closing device
> Telephone interface init failed: Command timed out.
> Quitting.
> Command timed out.
>
> Then I tried using Gammu but when i tried executing gammu --identify it says
> "Error during reading device"

About gammu you should be asking on gammu mailing lists.

-- 
Pawel Kot