Re: Gnokii-smsd-mysql question

[Paul Darius]

/dev/ttyUSB0 permission is 660

seems that /etc/rc.d/init.d/gnokii-smsd will run when /dev/ttyUSB0 
permission become 666.
but this device permission always become 660 when the box reboot.

what should we do ?

Paul
----- Original Message ----- 
From: "Jan Derfinak" <address@hidden>
To: "Discussion forum for gnokii users." <address@hidden>
Sent: Thursday, March 25, 2010 9:09 PM
Subject: Re: Gnokii-smsd-mysql question


> On Wed, 24 Mar 2010, Paul Darius wrote:
>
> Hello.
>
> > Initializing AT capable mobile phone ...
> > Serial device: opening device /dev/ttyUSB0
> > Gnokii serial_open: open: Permission denied
> > Couldn't open ATBUS device: Permission denied
> > AT bus initialization failed (1)
> > Initialization failed (1)
> > Serial device: closing device
> > Telephone interface init failed: Command failed.
> > Quitting.
> > Cannot unlock device.
> > GSM/FBUS init failed! (Unknown model?). Quitting.
> > Command failed.
> >
> > The gnokii --identify work fine as it can recognize the imei and other 
> > info
> > BUT /etc/rc.d/init.d/gnokii-smsd can not open the ports
>
> I don't know what /etc/rc.d/init.d/gnokii-smsd is doing. Try to run smsd 
> by
> hand under the same user as you run gnokii --identify.
> What permission you have on /dev/ttyUSB0?
> Do you have selinux or other security magic enabled?
>
>
> jan
>
> --
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users