gnokii 0.6.28 getdatetime timesout with Nokia 1650 & 1200

[Rohit Chaudhri]

Hi,
I am using gnokii version 0.6.28 to talk to Nokia 1650 and 1200 phones, using the NK6510 driver. I need to retrieve the phone's date and time, however the gnokii getdatetime command always times out for these phones. 
Could someone advise how I could make the getdatetime command work with these phones? 
I am pasting below the gnokii console log for the command (1650 followed by 1200).

Would appreciate any help regarding this.

Thanks.

 

//connected to Nokia 1650

./gnokii --getdatetime
GNOKII Version 0.6.28
LOG: debug mask is 0x1
Config read from file /home/rohitc/.gnokiirc.
phone instance config:
model = 6510
port = /dev/ttyUSB0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
[Received Ack of type 1b, seq:  0]
[Sending Ack of type 1b, seq: 0]
Message received: 0x1b / 0x002e
01 00 00 08 00 01 58 28 00 22 56 20 35 2e 37 31 |       X( "V 5.71
0a 31 32 2d 30 39 2d 30 38 0a 52 4d 2d 33 30 35 |  12-09-08 RM-305
0a 28 63 29 20 4e 4d 50 0a 4d 47 00 00 00       |  (c) NMP MG     
Received message type 1b
model length: 6
Received model RM-305
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
[Received Ack of type 19, seq:  1]
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
SM_Block: exiting the retry loop
Error: Command timed out.
Serial device: closing device

//connected to Nokia 1200

./gnokii --getdatetime
GNOKII Version 0.6.28
LOG: debug mask is 0x1
Config read from file /home/rohitc/.gnokiirc.
phone instance config:
model = 6510
port = /dev/ttyUSB0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
[Received Ack of type 1b, seq:  0]
[Sending Ack of type 1b, seq: 2]
Message received: 0x1b / 0x002e
01 00 00 08 00 01 58 28 00 21 56 20 34 2e 30 30 |       X( !V 4.00
0a 31 39 2d 31 30 2d 30 37 0a 52 48 2d 39 39 0a |  19-10-07 RH-99 
28 63 29 20 4e 4d 50 0a 4d 47 00 00 00 00       | (c) NMP MG      
Received message type 1b
model length: 5
Received model RH-99
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
[Received Ack of type 19, seq:  1]
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |                 
SM_Block: exiting the retry loop
Error: Command timed out.
Serial device: closing device