SMS Sierra AirCard 881U

[Todd E Johnson]

I'm trying to setup SMS Notifications through a AirCard 881U.  I can't
seem to get the card to send a message.  Any help appreciated.


The output is below.  

address@hidden ~]$ echo "Testing" | gnokii --sendsms 217XXXXXXX 
GNOKII Version 0.6.24
Couldn't read /home/todd/.gnokiirc config file.
Couldn't read /home/todd/.gnokiirc config file.
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model = AT
port = /dev/ttyUSB0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 1
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
read : [OK<cr><lf>]
Message received: 0x00 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
read : [OK<cr><lf>]
Message received: 0x00 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
read : [OK<cr><lf>]
Message received: 0x00 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM         
write: [AT+CGMM<cr>]
read : [OK<cr><lf>]
Message received: 0x06 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI         
write: [AT+CGMI<cr>]
read : [OK<cr><lf>]
Message received: 0x06 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 06
Message sent: 0x61 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?        
write: [AT+CSCS?<cr>]
read : [OK<cr><lf>]
Message received: 0x61 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 61
Initialisation completed
Message sent: 0x23 / 0x0009
41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?        
write: [AT+CSCA?<cr>]
read : [OK<cr><lf>]
Message received: 0x23 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 23
General Data Coding
dcs: 0x0
Length: 0x7
user_data_length: 0x7
ValidityIndicator: 2
user_data: D4F29C9E769F01
Sending
Message sent: 0x63 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [OK<cr><lf>]
Message received: 0x63 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 63
PDU mode set
Sending initial sequence
Message sent: 0x64 / 0x000b
41 54 2b 43 4d 47 53 3d 32 30 0d                | AT+CMGS=20      
write: [AT+CMGS=20<cr>]
read : [OK<cr><lf>]
Message received: 0x64 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 64
Got response 4
SMS Send failed (Problem occurred internal to model specific code.)
Serial device: closing device