Re: Initialization failed (11) for T230 + DCU-11

[Pawel Kot]

Hi,

On 5/22/07, munsoar <address@hidden> wrote:
> According to
> http://blog.mc-thias.org/index.php?blog=5&p=41&more=1&c=1&tb=1&pb=1#more41
> this page  gnokii shall work fine with T230 and DCU-11.
>
> But I have some problem when I try to verify that everything is correct by
> using gnokii --identify and get the following output:
>
> GNOKII Version 0.6.14
> LOG: debug mask is 0x1
> phone instance config:
> model: AT
> port_device: /dev/ttyUSB0
> connection_type: 0
> init_length: 0
> serial_baudrate: 9600
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Initializing AT capable mobile phone ...
> Serial device: opening device /dev/ttyUSB0
> Serial device: setting RTS to high and DTR to high
> Message sent: 0x00 / 0x0004
> 41 54 5a 0d                                     | ATZ
> write: [ATZ<cr>]
> Message sent: 0x00 / 0x0005

There is completly no answer from the phone. You may be using
incorrect port or whatever.

take care,
pkot
--
Pawel Kot