Re: gnokii with multiple phones

[Pawel Kot]

Hi,

On 5/22/07, jindalarpan <address@hidden> wrote:
> and i wanted to configure it to work with 2 usb based cables at same time
> but soem how i m not able to configure it. can can one please let me know
> who to resolve this issue.
> stepls followed by me .

Such configuration is currently not supported. See below.

> 1) installed gnokii
> emerge -avk gnokii (with usb and sms support)
> 2) created acm device nodes as
> mknod /dev/ttyACM0 c 166 0
> mknod /dev/ttyACM1 c 166 1

No need for that.

> 3) lsusb shows
> Bus 002 Device 003: ID 0421:042d Nokia Mobile Phones
> Bus 002 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 003 Device 002: ID 0421:04c4 Nokia Mobile Phones
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> 4) /etc/gnokiirc configuration file look like.
> [global]
>
> port = /dev/ttyACM0
> model = 6510
> initlength = default
> connection = dku2libusb
> use_locking = yes
> serial_baudrate = 19200
> smsc_timeout = 10
>
> [phone_1]
>
> port = /dev/ttyACM0
> model = 6510
> initlength = default
> connection = dku2libusb
> use_locking = yes
> serial_baudrate = 19200
> smsc_timeout = 10
>
> [phone_2]
>
> port = /dev/ttyACM1
> model = 6510
> initlength = default
> connection = dku2libusb
> use_locking = yes
> serial_baudrate = 19200
> [gnokiid]
> bindir = /usr/sbin/

The problem is that gnokii automatically finds the correct usb
endpoint related to DKU5 cable. And for both sections it finds just
the first one.

I can change the behaviour and try to choose the correct endpoint. The
question is how to identify the endpoint? Any hints what would be most
convenient for you?

take care,
pkot
--
Pawel Kot