Re: gnokii --identify help

[mikha]

and when i try the

echo "This is a test message" | gnokii --sendsms +639179291791 -r

i get this

GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
SM_Block: exiting the retry loop
Cannot read the SMSC number from your phone. If the sms send will fail,
please use --smsc option explicitely giving the number.
General Data Coding
dcs: 0x0
Length: 0x16
user_data_length: 0x14
ValidityIndicator: 2
user_data: 54747A0E4ACF416110BD3CA783DAE5F93C7C2E03
Sending
Sending SMS...(70)
Message sent: 0x02 / 0x0046
00 01 00 02 00 00 00 55 55 01 02 3c 31 00 00 00 |        UU  <1
00 04 82 0c 01 08 0c 91 36 19 97 92 71 19 82 0c |         6   q
02 01 00 00 00 00 00 00 00 00 80 18 14 16 54 74 |               Tt
7a 0e 4a cf 41 61 10 bd 3c a7 83 da e5 f9 3c 7c | z J Aa  <     <|
2e 03 08 04 01 a9                               | .
SM_Block: exiting the retry loop
SMS Send failed (Command timed out.)
Serial device: closing device

Is this because of the smsc? how can I fix this?
thanks

-- 
View this message in context: 
http://www.nabble.com/gnokii---identify-help-tf3290922.html#a9153568
Sent from the gnokii-users mailing list archive at Nabble.com.