Re: Fwd: nokia_dku2.c patch for 2.6.15.6

[Mlists]

On Wed, 2006-04-05 at 13:23 -0400, Mlists wrote:
> On Wed, 2006-04-05 at 18:14 +0200, Pawel Kot wrote:
> > Hi,
> > 
> > On 4/5/06, Mlists <address@hidden> wrote:
> > > > > > The driver does not create any devices. Userspace tools like udev
> > > > > > currently to it.
> > > > >
> > > > > Sorry its so long but its a general purpose kernel.  I use ARCH linux.
> > > >
> > > > I meant lsusb. Sorry for the mistake.

My phone is a NOkia 6620.

Well, I've had some time to hack a bit of the code and I have
the /dev/USB0 coming up with the following changes:

nokia_dku2.h
#define NOKIA6620_PRODUCT_ID    0x040d

nokia_dku2.c
static struct usb_device_id id_table [] = {
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
        { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6620_PRODUCT_ID) },
        { }                     /* Terminating entry */
};

It now recognizes my phone but not the ports.  It seems the 6620 uses
different endpoints then the rest.

The NOKIA_AT_PORT for the 6620 is 0x84.
  Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              7 CDC Comms Interface
      CDC Header:
        bcdCDC               1.00
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             128

>From what I read from the lsusb -vvv however, my phone is not showing an
endpoint for Obex -- is that correct?  

 Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass         2 Communications
      bInterfaceSubClass     11 OBEX
      bInterfaceProtocol      0
      iInterface              6 PC Suite Services
      CDC Header:
        bcdCDC               1.10
      CDC OBEX:
        bcdVersion           1.00
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7

Is this a problem with the phone?  Why would it not be showing the
endpoint properly?  Any help would be appreciated!

Norm