nokia 3120b with gnokii 0.6.8 -- can it work?

[Avery Salmon]

I am trying to use gnokii 0.6.8 with a Nokia 3120b. My host OS is WinXP so I 
built gnokii under cygwin with the '-enable-win32' option.  This went Ok and 
gnokii.exe was created.

I run gnokii.exe in a cygwin window.

My 1st attempt was 'model = 3120', but that resulted in something like 
"unsupported model".

I then tried various other models, but they all resulted in "init failed, 
device not ready'.

I then tried 'model = AT' and get the ouput below  (stays the same for 
serial_baudrate = 19200, or serial_baudrate = 115200 which is the baud rate 
that XP reports for the port).

Nokia's PC Suite connects to the phone as a serial port without error.

I am using a CA-42 cable.

My _gnokiirc is attached. 

Is the 3120 similar to any supported model so I could use the technique 
described at  http://www.gnokii.org/faq.shtml#newphone  ??

Any help would be greatly appreciated. 

Avery

---------------- ouput of model=AT ---------------------
$ gnokii --identify
GNOKII Version 0.6.8
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: com4:
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device com4:
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x000d
03 41 54 5a 0d 0d 0a 45 52 52 4f 52 0d          |  ATZ   ERROR
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x000e
03 41 54 45 31 0d 0d 0a 45 52 52 4f 52 0d       |  ATE1   ERROR
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x0013
03 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 45 52 52 |  AT+CMEE=1   ERR
4f 52 0d                                        | OR
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x06 / 0x0011
03 41 54 2b 43 47 4d 4d 0d 0d 0a 45 52 52 4f 52 |  AT+CGMM   ERROR
0d                                              |
Received message type 06
Initialization failed (8)
Telephone interface init failed: Unknown error - well better than nothing!!
Quitting.

_gnokiirc
Description: Binary data