[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
gnokii stopped working with new server hardware
From: |
Robert Sander |
Subject: |
gnokii stopped working with new server hardware |
Date: |
Thu, 26 May 2005 10:29:25 -0000 |
User-agent: |
Mutt/1.5.6i |
Hi!
We experience a strange problem. Gnokii stopped working when we
exchanged the hardware of the computer it should be running on.
The old one was a single Celeron box, the new one is a dual Xeon system.
The hardware does work. The phone + cable work on a different (also SMP)
system and both the serial ports on the new system work.
The debug output looks like:
GNOKII Version 0.6.5
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
phone instance config:
model: 6110
port_device: /dev/ttyS1
connection_type: 1
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block: exiting the retry loop
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block: exiting the retry loop
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block: exiting the retry loop
Telephone interface init failed: Command timed out.
Quitting.
I appriciate any hints for a solution.
Greetings
--
Robert Sander Senior Manager Information Systems
Epigenomics AG Kleine Praesidentenstr. 1 10178 Berlin, Germany
phone:+49-30-24345-330 fax:+49-30-24345-555
http://www.epigenomics.com address@hidden
Anotaram a data da Maratona.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- gnokii stopped working with new server hardware,
Robert Sander <=