Re: New with my Motorola C333

[Fernando Gabriel Barceló Tomás]

I forgot to eneble usb modem support in may kernel configuration :-)

I'm recompiling it right now and going to try again, this night.

Thanks


El dom, 14-03-2004 a las 07:01, Ron Yorston escribió:
> Fernando Gabriel wrote:
> >But it seems that /dev/ttyACM0 is doesnt linked to the phone.
> >
> >I must change handly some usb configuration?
> 
> Hmm, maybe.  I'm not sure what you need to do to make it work in
> Debian.  On my Fedora system the necessary driver is loaded when
> I plug in the cable.  Here's the relevant part of the output from
> the dmesg command:
> 
>    hub.c: connect-debounce failed, port 1 disabled
>    hub.c: new USB device 00:07.2-1, assigned address 2
>    usb.c: USB device 2 (vend/prod 0x22b8/0x5802) is not claimed by any active 
> driver.
>    usb-uhci.c: ENXIO 80000280, flags 0, urb c07f7e00, burb c07f7f00
>    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
>    usb.c: registered new driver acm
>    ttyACM0: USB ACM device
>    acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN 
> adapters
> 
> The acm driver is loaded and ttyACM0 is assigned.
> 
> Ron
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/gnokii-users

Saludos de Fernando Barceló
Desde Buenos Aires Argentina   
Usuario Registrado Linux Nº 296158