Re: Nokia 6130/6110: no response with --monitor

[Ekkard Gerlach]

Hello, 

I found a newer version. The homepage
http://www.gnokii.org/downloads.shtml  
refers with  ftp.gnokii.org  to  ftp://ftp.gnokii.org/pub/gnokii/pre/. 
Klicking to "Up to higher level directory" I come to a much 
newer Version!!!!! gnokii-0.5.4.tar.bz2 ! 

Okay, I just tried it. I made 
  ./configure --enable-debug
Now gnokii tells more: 


with "dlr3p" as connection: 
^^^^^^^^^^^^^^^^^^^^^^^^^^
address@hidden:~>gnokii --identify
GNOKII Version 0.5.4
Opened configuration file /home/gerlach/.gnokiirc
Added new section global
Adding key/value port//dev/ttyS1
Adding key/value model/6130
Adding key/value initlength/default
Adding key/value connection/dlr3p
Adding key/value bindir//usr/local/sbin/
Adding key/value use_locking/yes
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/10
Added new section connect_script
Adding key/value TELEPHONE/07218307935
Added new section disconnect_script
phone instance config:
model: 6130
port_device: /dev/ttyS1
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
Telephone interface init failed: Function or connection type not supported by 
the phone.
Quitting.


with "serial" as connection:
^^^^^^^^^^^^^^^^^^^^^^^^^
address@hidden:~>gnokii --identify
GNOKII Version 0.5.4
Opened configuration file /home/gerlach/.gnokiirc
Added new section global
Adding key/value port//dev/ttyS1
Adding key/value model/6130
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//usr/local/sbin/
Adding key/value use_locking/yes
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/10
Added new section connect_script
Adding key/value TELEPHONE/07218307935
Added new section disconnect_script
phone instance config:
model: 6130
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
[...]
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
Telephone interface init failed: Command timed out.
Quitting.


address@hidden:~>gnokii --monitor
GNOKII Version 0.5.4
Opened configuration file /home/gerlach/.gnokiirc
Added new section global
Adding key/value port//dev/ttyS1
Adding key/value model/6130
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//usr/local/sbin/
Adding key/value use_locking/yes
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/10
Added new section connect_script
Adding key/value TELEPHONE/07218307935
Added new section disconnect_script
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
phone instance config:
model: 6130
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d     
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d        
[...]
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
Telephone interface init failed: Command timed out.
Quitting.

any ideas? 
thx
Ekkard


* Pawel Kot schrieb:

> On Tue, 23 Sep 2003, Ekkard Gerlach wrote:
> 
> > Hello,
> >
> > Nokia 6130 or 6110, serial cable ttyS1, Kernel 2.4.20
> >
> > address@hidden:~>gnokii --monitor
> > GNOKII Version 0.5.0rc4
> 
> Why not anything newer?
> 
> pkot
> -- 
> mailto:address@hidden :: mailto:address@hidden
> http://kt.linuxnews.pl/ :: Kernel Traffic po polsku
>