gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Bluetooth address translation


From: Pawel Kot
Subject: Re: Bluetooth address translation
Date: Tue, 29 Apr 2003 10:02:37 +0200 (CEST)

On Tue, 29 Apr 2003, Martin List-Petersen wrote:

> Citat Pawel Kot <address@hidden>:
>
> > On 28 Apr 2003, Marcel Holtmann wrote:
> >
> > > I have run tests with my Nokia 6210 and 6310 and it is now possible to
> > > use full phone suite functions over Bluetooth with both phones.
> >
> > Nice, I'm glad to hear this. Anyone to try the AT driver with
> > Ericsson/Siemens/whatever?
>
> I've been fiddling around with an Ericsson T39m, Bluetooth and Gnokii 0.4.3

Well, I'm rather interested in the regression tests with current CVS at
the moment.

> XGnokii:
> When i try to import my contacts, that also starts nicely, it starts
> complaining
> from position 356 and on: "xgnokii_lowlevel.c: line 519: Can't get memory 
> entry
> number 356 from memory 0! 8" (the 358 of course increases). Since this is some
> kind of timeout that times out here, it takes quite some time to complete for
> each position.
>
> After position 474, gnokii fails with "Event 2 failed with return code 8" and
> nothing is fetched at all.
>
> When it comes to reading sms-centers, that doesn't work (there are no
> sms-centers read from the phone, the list is empty). On sending an SMS it 
> fails
> with an error 11. (Output on console: Event 13 failed with return code 11.)
>
> In settings, the Phone model is unknown, version is R3B006, revision is R3B006
>
>  CXC125269. (also opening the settings returns an: Event 21 failed with return
> code 5.)
>
> So XGnokii is pretty useless right now.

Care to compile with debug output and show it here? (but the current
version).

> gnokii on the console w/o smsc specified just either fails with "Timeout:
> abouting command ``/usr/lib/gnokii'' with signal 9
> /usr/bin/gnokii: line 16: 1211 Killed     timeout $TIMEOUT $BINARY $@"
>
> with smsc specified (--smsc) it just will initialize the AT interface and then
> output the help screen, as if some options where wrong.
>
> I did specify "gnokii --sendsms <no> --smsc <no>"
>
> So no good results here either. Haven't tried newer versions yet.

Same here.

thanks,
pkot
-- 
mailto:address@hidden :: mailto:address@hidden
http://kt.linuxnews.pl/ :: Kernel Traffic po polsku





reply via email to

[Prev in Thread] Current Thread [Next in Thread]