gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How detect incoming call????? - Last chapters!!


From: Eduardo Garcia
Subject: Re: How detect incoming call????? - Last chapters!!
Date: Wed, 19 Feb 2003 16:43:36 -0300

Ok guys, I finally discover the problem about my last sent package.
The 16 bytes 0x00 before "NOKIA&NOKIA accessory" will be filled
with IMEI, TAC and MAGIC BYTES.

But why Phone Info command not work?? It command only answer
an ack to me. None IMEI, TAC and mainly bytes!

I am near of solution, please help!
Why this commands don't answer me correctly.
I'm using MBUS, 9600, 8O1 and Cell Phones CDMA 5120 and 3280.

Thanks in advance,
Eduardo Garcia


----- Original Message -----
From: Eduardo Garcia
To: Mark V ; Discussion forum for gnokiiusers.
Sent: Wednesday, February 19, 2003 12:35 PM
Subject: Re: How detect incoming call?????


Sorry my last message.
The correct sent packages are:
PACK_1=^&1F^&00^&1D^&40^&00^&04^&00^&01^&64^&03^&05^&25 (Reset - Work Fine)
PACK_2=^&1F^&00^&1D^&40^&00^&04^&00^&01^&64^&00^&08^&2B (I see using it in
6100.c - answer ok)
PACK_3=^&1F^&00^&1D^&04^&00^&04^&00^&01^&00^&01^&05^&07
(Phone ID - Answered ack but none ID)
PACK_4=^&1F^&00^&1D^&D1^&00^&05^&00^&01^&00^&03^&00^&02^&D6
(Get HW/SW - Answer OK)
PACK_5=^&1F^&00^&1D^&02^&00^&07^&00^&01^&00^&0D^&00^&00^&02^&03^&0A
(Init Connect - Answer ack only)
PACK_6=^&1F^&00^&1D^&02^&00^&05^&00^&01^&00^&20^&02^&04^&22
(Set Broadcast - Answer ack only)
PACK_7=^&1F^&00^&1D^&02^&00^&07^&00^&01^&00^&0D^&01^&00^&02^&05^&0D
(Not listed in 6110.txt - Anser ack only)
PACK_8=^&1F^&00^&1D^&64^&00^&04^&00^&01^&00^&10^&01^&72
(Phone ID - Answered ack but nothing ID)
PACK_9=^&1F^&00^&10^&64^&00^&2C^&00^&01^&00^&12^&00^&00^&00^&00^&00^&00
^&00^&00^&00^&00^&00^&00^&00^&00^&00^&00^&4E^&4F^&4B^&49^&41^&26^&4E^&4F
^&4B^&49^&41^&20^&61^&63^&63^&65^&73^&73^&6F^&72^&79^&00^&00^&00^&07^&35
(answered ACK but don't display nothing in LCD)

Please, what I am doing wrong?

Thanks in advance.
----- Original Message -----
From: Mark V
To: Eduardo Garcia ; Discussion forum for gnokiiusers.
Sent: Tuesday, February 18, 2003 9:44 AM
Subject: Re: How detect incoming call?????


Eduardo,

I have written code to authenticate using BASCOM on a ATMEL microcontroller.

In my experimentation, I found that you didn't need to authenticate, but the
Set Cell Broadcast had to be sent to the phone, and after this, incoming
call notification came through.

If you are interested, you can check out http://www.mcselec.com/an_124.htm
for an application note I have 'thrown' together.  Due to limited memory in
microcontoller, and because I was using Basic, and not assembly, I could not
fit everything into 8K memory.

Note, I used FBUS, and not MBUS, but I assume that the packets/packet order
are very similiar.

HTH

Mark Voevodin
----- Original Message -----
From: "Eduardo Garcia" <address@hidden>
To: "Osma Suominen" <address@hidden>
Cc: "Discussion forum for gnokii users." <address@hidden>
Sent: Tuesday, February 18, 2003 9:55 PM
Subject: Re: How detect incoming call?????


>
> > How can I detect a incoming call in this cell phones (6120, 5120 and
3280
> > are the models that I using now. I think that 51XX and 61XX models are
> very
> > similar) using MBUS protocol with a MICROCONTROLER (Microchip PIC more
> > exactly) managing it through USART??


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.455 / Virus Database: 255 - Release Date: 13/02/03



_______________________________________________
gnokii-users mailing list
address@hidden
http://mail.nongnu.org/mailman/listinfo/gnokii-users


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.456 / Virus Database: 256 - Release Date: 18/02/03





reply via email to

[Prev in Thread] Current Thread [Next in Thread]