Nokia 6150---serial port---solaris8 SUN

[Di Ventura, Claudio]

Help me, please!!!

i have one Nokia 6150 connect on the serial port with pc SUN solaris8

when I have edit xgnokii

 bash-2.03$ xgnokii
GSM/FBUS init failed!
GSM/FBUS init failed!
GSM/FBUS init failed!

i have configured the file gnokiirc in these sequence mode

# This is a sample ~/.gnokiirc file.  Copy it into your
# home directory and name it .gnokiirc.
#

[global]

# Set port to the physical serial port used to connect to your phone
port = /dev/ttya

# Set model to the model number of your phone
model = 6150

# Initlength controls the number of characters sent to the
# phone during initialisation.  You can either set it to
# the word "default" or a positive integer.
#
# You can try setting this value if you want to connect
# to the phone quicker.  If you've never noticed the
# connection to be slow, it is suggested that you
# leave this alone.  Read the initialisation code in fbus-xxxx
# to understand what this changes if you're curious.
initlength = default

# The type of the connection, for IR set this to infrared or irda.
# For the nk6110 driver only infrared is valid for the IrDA connection.
# See Docs/gnokii-ir-howto for more detailes on this.
# If you have 6210/6250/7110 phone and dau9p cable (the one you can
# use with 6100 series and cannot use hardware modem from the phone)
# you may want to use 'dau9p' value to get faster initialization.
# If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
# you don't use model = AT) you may want to use 'dlr3p' value here.
# Note that it is recommended and currently the best way to use this
# cable with nk6510 driver.
connection = serial

# Set bindir to point to the location of the various gnokii binaries.
# In particular ensure that mgnokiidev is in this location, with
# permissions 4750, owned by root, group gnokii.  Ensure you
# are in the gnokii group and that the group exists...
bindir = /usr/local/sbin/

# Set this to 'yes' if you want gnokii to set and check the lock file in
# /var/lock directory. It avoids potential conflicts with other serial
# port software (eg. minicom). If you have wrong permissions for the
# directory, a warning will be generated. If you don't want a lockfile, set
# it to 'no'.
use_locking = no

# Baudrate to use on serial port connections.
# Currently used only by models AT and BIP/CIMD. Defaults to 19200.
serial_baudrate = 19200

# Force waiting after each send character the specified usec time.
# Value -1 forces the fastest 'block' writing,
# value 0 writes each character separately without any explicite waiting,
# other positive values specify the appropriate 1/1000000 sec delaying.
# Siemens M20 requires at least "1"!  FIXME: Model-driven autodetection
#serial_write_usleep = 10000

# Force serial port handshaking mode, useful primarily for "AT" model.
# Gnokii "AT" model uses software handshake by default.
# Possible values: hardware (RTS/CTS - 7 wires) or software (XON/XOFF - 3 wires)
#handshake = software

# If defined (not commented out by '#') it will quit Gnokii anytime
# when DCD line will drop.
#require_dcd = 1

# Run the specified script(s) right after opening and initializing the device
# and before any communucation (right before closing for disconnect_script).
# You may find handy to use it to connect your modem to SMS Center
# when using BIP or CIMD protocols
# Non-absolute path is relative to the specific directory where gnokii is run!
#connect_script = /absolute/path/to/gnokii/Docs/sample/cimd-connect
#disconnect_script =

[connect_script]
TELEPHONE = 348xxxxxx
[disconnect_script]

# When sending SMS you can experience timeouts. This is the feature of the
# overloaded SMSCs. The phones waits for the response from the SMSC confirming
# that it received the short message. When the SMSC is DoSed with many requests
# it will take more time to get the response. Adjust it to your needs. The
# value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to wait
# forever.
[sms]
timeout = 10

********************************************************************************************************
COLT Telecom SpA
Sede Legale: Viale Jenner, 56 - 20159 Milano
Tel. 02-303331
CF e P.IVA: 12286350157 - Reg.Imp. Milano n. 309043 - REA n. 154763

Il presente messaggio non costituisce un impegno contrattuale tra COLT Telecom S.p.A.,
le proprie Consociate od Affiliate ("COLT") ed il destinatario.
Le opinioni ivi espresse sono quelle dell'autore.
COLT non assume alcuna responsabilita' riguardo al contenuto del presente messaggio.
Il messaggio e' destinato esclusivamente al destinatario.
Il contenuto e gli allegati sono da considerarsi di natura confidenziale.
Nel caso abbiate ricevuto il presente messaggio per errore, siete pregati di telefonare
al numero indicato sopra.
*********************************************************************************************************