gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

6310 over serial cable


From: Vitezslav Samel
Subject: 6310 over serial cable
Date: Mon, 1 Jul 2002 16:27:29 +0200
User-agent: Mutt/1.4i

        Hi!

  I'm trying to use 6310 (firmware 4.10) with 6310 driver over serial cable
(dlr3p), but gnokii doesn't identify my phone (when model set to AT
(almost) all is OK).
  All commands of gnokii ends with error listed below. What should I do to make
my phone work with gnokii?

        Cheers,
                Vita

P.S. Yes, I read the archive, there was one question exactly the same back in
May 21, but I didn't see any answer.

------- gnokii-6310.out -------

GNOKII Version 0.4.0pre20
CFG_ReadFile - open /root/.gnokiirc: No such file or directory
Opened configuration file /etc/gnokiirc
Added new section global
Adding key/value port//dev/ttyS0
Adding key/value model/6310
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//usr/local/sbin/
Adding key/value use_locking/no
Adding key/value serial_baudrate/19200
Adding key/value serial_write_usleep/100
Adding key/value handshake/software
Added new section connect_script
Added new section disconnect_script
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 2
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 2
Telephone interface init failed! Quitting.
Serial device: closing device



reply via email to

[Prev in Thread] Current Thread [Next in Thread]