gluster-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Gluster-devel] very strange issue with 2.0.1


From: Steve
Subject: Re: [Gluster-devel] very strange issue with 2.0.1
Date: Sat, 13 Jun 2009 17:13:39 +0200

-------- Original-Nachricht --------
> Datum: Mon, 08 Jun 2009 11:19:35 +0530
> Von: Shehjar Tikoo <address@hidden>
> An: Steve <address@hidden>
> CC: address@hidden
> Betreff: Re: [Gluster-devel] very strange issue with 2.0.1

Hello Shehjar

I moved away from GlusterFS. At least for this particular setup. I would have 
loved to use GlusterFS but it does not work stable enough for me. I had this 
system prepared for some time and wanted slowly to move users from my old mail 
server to that new system. On Sunday I had to move users because the old server 
had a hardware issue. Whole Monday was a mess. GlusterFS was crashing with a 
such high rate that on Monday after office hours I decided to move everything 
to NFS. Since then I have no real issue (and I do not have the replication 
stuff I loved to have).


> There are two things that'll help us very much here:
> 
> 1. As request by Vikas earlier, a backtrace from gdb.
> 
I can't produce you that backtrace from GDB. I moved everything away from 
GlusterFS. I still have the old configuration on the two systems and could try 
to reproduce the error but maybe I can't. My old tests with just my sitting on 
the GlusterFS server never where so catastrophic as when I moved around 300 
mail domains to run on top of GlusterFS.


> 2. It would also help if you could run the same config minus the
> io-threads over NUFA. We want to determine if the behavior is similar
> to a crash we saw a month ago.
> 
During Monday this week I did remove io-threads and NUFA and things where more 
stable but still not enough stable. At the end I just had posix locks and AFR. 
Nothing more and nothing less. But that still did not help to make GlusterFS 
stable enough for me.


> Thanks
> Shehjar
> 
Steve

> 
> Steve wrote:
> > I have a very strange issue with 2.0.1. I have 2 systems. On each 
> > system there is server AND client running. The 2 servers are using 
> > serverside afr/replicate and the client on each is connected to a 
> > single brick/volume exported on his local server. The client does not
> >  know anything about the other server.
> 
> 
> 
> _______________________________________________
> Gluster-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gluster-devel

-- 
GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate und Telefonanschluss
für nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02




reply via email to

[Prev in Thread] Current Thread [Next in Thread]