[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Devel] Revised build process for OpenVMS Freetype 2.1.4
|
From: |
zinser |
|
Subject: |
[Devel] Revised build process for OpenVMS Freetype 2.1.4 |
|
Date: |
Mon, 19 May 2003 00:19:55 +0200 |
Hello,
further revisions to a toplevel vms_make.com for freetype 2. Main changes:
* Reworked support for shareable images. The first version was kind
of a hack, the current implementation of the procedure to extract
the required symbols is much cleaner.
* Reworked creation of MMS files, avoiding a number of temporary files
which were created in the previous version.
* Further work on creating descrip.mms files on the fly. Adding
correct dependencies to src/type1/descrip.mms in the process.
One minor compiler message in src/type1/t1load.c, which can be easily
fixed using the patch below. (An alternate solution would be to make len
signed obviously).
CC/define=(FT_CONFIG_OPTION_SYSTEM_ZLIB)/include=([--.include],[--.src.type1]) T
YPE1.C
if ( len <= 0 )
...........^
%CC-I-QUESTCOMPARE, In this statement, the unsigned expression "len" is being co
mpared with a relational operator to a constant whose value is not greater than
zero. This might not be what you intended.
at line number 428 in file DISK$USER:[ZINSER.TMP.FT2.SRC.TYPE1]t1load.c;1
Updated vms_make.com for the FreeType 2 demos to also build the new ftbench
program.
Greetings, Martin
*** src/type1/t1load.c.orig 2003-05-13 17:53:18.000000000 -0500
--- src/type1/t1load.c 2003-05-13 17:53:45.000000000 -0500
***************
*** 425,431 ****
token->start++;
len = token->limit - token->start;
! if ( len <= 0 )
{
error = T1_Err_Invalid_File_Format;
goto Exit;
--- 425,431 ----
token->start++;
len = token->limit - token->start;
! if ( len == 0 )
{
error = T1_Err_Invalid_File_Format;
goto Exit;
$!---------------vms_make.com for Freetype2------------------------------------
$! make Freetype2 under OpenVMS
$!
$! In case of problems with the build you might want to contact me at
$! address@hidden(preferred) or address@hidden (Work)
$!
$! This procedure currently does support the following commandline options
$! in arbitrary order
$!
$! * DEBUG - Compile modules with /noopt/debug and link shareable image
$! with /debug
$! * LOPTS - Options to be passed to the link command
$! * CCOPT - Options to be passed to the C compiler
$!------------------------------------------------------------------------------
$!
$! Just some general constants
$!
$ true = 1
$ false = 0
$ Make = ""
$!
$! Setup variables holding "config" information
$!
$ name = "Freetype2"
$ mapfile = name + ".map"
$ optfile = name + ".opt"
$ s_case = false
$ libdefs = ""
$ libincs = ""
$ liblist = ""
$ ccopt = ""
$ lopts = ""
$!
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$! Which command parameters were given
$!
$ gosub check_opts
$!
$! Create option file
$!
$ open/write optf 'optfile'
$!
$! Pull in external libraries
$!
$ create libs.opt
$ gosub check_create_vmslib
$!
$! Create objects
$!
$ if libdefs .nes. "" then ccopt = ccopt + "/define=(" + libdefs + ")"
$!
$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
then s_case = true
$ gosub crea_mms
$!
$ 'Make' /macro=(comp_flags="''ccopt'")
$ purge/nolog [...]descrip.mms
$!
$! Add them to options
$!
$FLOOP:
$ file = f$edit(f$search("[...]*.obj"),"UPCASE")
$ if (file .nes. "")
$ then
$ if f$locate("DEMOS",file) .eqs. f$length(file) then write optf file
$ goto floop
$ endif
$!
$ close optf
$!
$!
$! Alpha gets a shareable image
$!
$ If f$getsyi("HW_MODEL") .gt. 1024
$ Then
$ write sys$output "Creating freetype2shr.exe"
$ call anal_obj_axp 'optfile' _link.opt
$ open/append optf 'optfile'
$ if s_case then WRITE optf "case_sensitive=YES"
$ close optf
$ LINK_/NODEB/SHARE=[.lib]freetype2shr.exe -
'optfile'/opt,libs.opt/opt,_link.opt/opt
$ endif
$!
$ exit
$!
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms files ..."
$ write sys$output "... Main directory"
$ create descrip.mms
$ open/append out descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 build system -- top-level Makefile for OpenVMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
$ EOD
$ write out "CFLAGS = ", ccopt
$ copy sys$input: out
$ deck
all :
define freetype [--.include.freetype]
define psaux [-.psaux]
define autohint [-.autohint]
define base [-.base]
define cache [-.cache]
define cff [-.cff]
define cid [-.cid]
define pcf [-.pcf]
define psnames [-.psnames]
define raster [-.raster]
define sfnt [-.sfnt]
define smooth [-.smooth]
define truetype [-.truetype]
define type1 [-.type1]
define winfonts [-.winfonts]
if f$search("lib.dir") .eqs. "" then create/directory [.lib]
set default [.builds.vms]
$(MMS)$(MMSQUALIFIERS)
set default [--.src.autohint]
$(MMS)$(MMSQUALIFIERS)
set default [-.base]
$(MMS)$(MMSQUALIFIERS)
set default [-.bdf]
$(MMS)$(MMSQUALIFIERS)
set default [-.cache]
$(MMS)$(MMSQUALIFIERS)
set default [-.cff]
$(MMS)$(MMSQUALIFIERS)
set default [-.cid]
$(MMS)$(MMSQUALIFIERS)
set default [-.gzip]
$(MMS)$(MMSQUALIFIERS)
set default [-.pcf]
$(MMS)$(MMSQUALIFIERS)
set default [-.pfr]
$(MMS)$(MMSQUALIFIERS)
set default [-.psaux]
$(MMS)$(MMSQUALIFIERS)
set default [-.pshinter]
$(MMS)$(MMSQUALIFIERS)
set default [-.psnames]
$(MMS)$(MMSQUALIFIERS)
set default [-.raster]
$(MMS)$(MMSQUALIFIERS)
set default [-.sfnt]
$(MMS)$(MMSQUALIFIERS)
set default [-.smooth]
$(MMS)$(MMSQUALIFIERS)
set default [-.truetype]
$(MMS)$(MMSQUALIFIERS)
set default [-.type1]
$(MMS)$(MMSQUALIFIERS)
set default [-.type42]
$(MMS)$(MMSQUALIFIERS)
set default [-.winfonts]
$(MMS)$(MMSQUALIFIERS)
set default [--]
# EOF
$ eod
$ close out
$ write sys$output "... [.builds.vms] directory"
$ create [.builds.vms]descrip.mms
$ open/append out [.builds.vms]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 system rules for VMS
#
# Copyright 2001 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([],[--.include],[--.src.base])
OBJS=ftsystem.obj
all : $(OBJS)
library/create [--.lib]freetype.olb $(OBJS)
ftsystem.obj : ftsystem.c ftconfig.h
# EOF
$ eod
$ close out
$ write sys$output "... [.src.autohint] directory"
$ create [.src.autohint]descrip.mms
$ open/append out [.src.autohint]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 auto-hinter module compilation rules for VMS
#
# Copyright 2001, 2002 Catharon Productions Inc.
#
# This file is part of the Catharon Typography Project and shall only
# be used, modified, and distributed under the terms of the Catharon
# Open Source License that should come with this file under the name
# `CatharonLicense.txt'. By continuing to use, modify, or distribute
# this file you indicate that you have read the license and
# understand and accept it fully.
#
# Note that this license is compatible with the FreeType license.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/incl=([--.include],[--.src.autohint])
OBJS=autohint.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.gzip] directory"
$ create [.src.gzip]descrip.mms
$ open/append out [.src.gzip]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 GZip support compilation rules for VMS
#
# Copyright 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
$EOD
$ if libincs .nes. "" then write out "LIBINCS = ", libincs, ","
$ copy sys$input: out
$ deck
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=($(LIBINCS)[--.include],[--.src.gzip])
OBJS=ftgzip.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
# EOF
$ eod
$ close out
$ write sys$output "... [.src.type1] directory"
$ create [.src.type1]descrip.mms
$ open/append out [.src.type1]descrip.mms
$ copy sys$input: out
$ deck
#
# FreeType 2 Type1 driver compilation rules for VMS
#
# Copyright 1996-2000, 2002 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
CFLAGS=$(COMP_FLAGS)$(DEBUG)/include=([--.include],[--.src.type1])
OBJS=type1.obj
all : $(OBJS)
library [--.lib]freetype.olb $(OBJS)
type1.obj : type1.c t1parse.c t1load.c t1objs.c t1driver.c t1gload.c t1afm.c
# EOF
$ eod
$ close out
$ return
$!------------------------------------------------------------------------------
$!
$! Check command line options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$! if cparm .eqs. "LINK" then linkonly = true
$ if f$locate("LOPTS",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CCOPT",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Take care of driver file with information about external libraries
$!
$CHECK_CREATE_VMSLIB:
$!
$ if f$search("VMSLIB.DAT") .eqs. ""
$ then
$ type/out=vmslib.dat sys$input
!
! This is a simple driver file with information used by make.com to
! check if external libraries (like t1lib and freetype) are available on
! the system.
!
! Layout of the file:
!
! - Lines starting with ! are treated as comments
! - Elements in a data line are separated by # signs
! - The elements need to be listed in the following order
! 1.) Name of the Library
! 2.) Location where the object library can be found
! 3.) Location where the include files for the library can be found
! 4.) Include file used to verify library location
! 5.) CPP define to pass to the build to indicate availability of
! the library
!
! Example: The following lines show how definitions
! might look like. They are site specific and the locations of the
! library and include files need almost certainly to be changed.
!
! Location: All of the libaries can be found at the following addresses
!
! ZLIB: http://www.decus.de:8080/www/vms/sw/zlib.htmlx
!
!ZLIB # pubbin:libz.olb # public$Root:[util.libs.zlib] # zlib.h #
FT_CONFIG_OPTION_SYSTEM_ZLIB
$ write sys$output "New driver file vmslib.dat created."
$ write sys$output "Please customize libary locations for your site"
$ write sys$output "and afterwards re-execute vms_make.com"
$ write sys$output "Exiting..."
$ close/nolog optf
$ exit
$ endif
$!
$! Open data file with location of libraries
$!
$ open/read/end=end_lib/err=lib_err libdata VMSLIB.DAT
$ open/append loptf libs.opt
$LIB_LOOP:
$ read/end=end_lib libdata libline
$ libline = f$edit(libline, "UNCOMMENT,COLLAPSE")
$ if libline .eqs. "" then goto LIB_LOOP ! Comment line
$ libname = f$edit(f$element(0,"#",libline),"UPCASE")
$ liblist = liblist + "#" + libname
$ write sys$output "Processing ''libname' setup ..."
$ libloc = f$element(1,"#",libline)
$ libsrc = f$element(2,"#",libline)
$ testinc = f$element(3,"#",libline)
$ cppdef = f$element(4,"#",libline)
$ old_cpp = f$locate("=1",cppdef)
$ if old_cpp.lt.f$length(cppdef) then cppdef = f$extract(0,old_cpp,cppdef)
$ if f$search("''libloc'").eqs. ""
$ then
$ write sys$output "Can not find library ''libloc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ libsrc_elem = 0
$ libsrc_found = false
$LIBSRC_LOOP:
$ libsrcdir = f$element(libsrc_elem,",",libsrc)
$ if (libsrcdir .eqs. ",") then goto END_LIBSRC
$ if f$search("''libsrcdir'''testinc'") .nes. "" then libsrc_found = true
$ libsrc_elem = libsrc_elem + 1
$ goto LIBSRC_LOOP
$END_LIBSRC:
$ if .not. libsrc_found
$ then
$ write sys$output "Can not find includes at ''libsrc' - Skipping ''libname'"
$ goto LIB_LOOP
$ endif
$ if cppdef .nes. "" then libdefs = libdefs + "," + cppdef
$ libincs = libincs + "," + libsrc
$ lqual = "/lib"
$ libtype = f$parse(libloc,,,"TYPE")
$ if f$locate("EXE",libtype) .lt. f$length(libtype) then lqual = "/share"
$ write loptf libloc , lqual
$ goto LIB_LOOP
$END_LIB:
$ close libdata
$ close loptf
$ libincs = libincs - ","
$ libdefs = libdefs - ","
$ return
$!------------------------------------------------------------------------------
$!
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! information to build a symbol vector for a shareable image
$! All the "brains" of this logic was suggested by Hartmut Becker
$! (address@hidden). All the bugs were introduced by me
$! (address@hidden), so if you do have problem reports please do not
$! bother Hartmut/HP, but get in touch with me
$!
$ ANAL_OBJ_AXP: Subroutine
$ V = 'F$Verify(0)
$ SAY := "WRITE_ SYS$OUTPUT"
$
$ IF F$SEARCH("''P1'") .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
$ goto exit_aa
$ ENDIF
$ IF "''P2'" .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
$ goto exit_aa
$ ENDIF
$
$ open/read in 'p1
$ create a.tmp
$ open/append atmp a.tmp
$ loop:
$ read/end=end_loop in line
$ f= f$search(line)
$ if f .eqs. ""
$ then
$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
$ goto loop
$ endif
$ def/user sys$output nl:
$ def/user sys$error nl:
$ anal/obj/gsd 'f /out=x.tmp
$ open/read xtmp x.tmp
$ XLOOP:
$ read/end=end_xloop xtmp xline
$ xline = f$edit(xline,"compress")
$ write atmp xline
$ goto xloop
$ END_XLOOP:
$ close xtmp
$ goto loop
$ end_loop:
$ close in
$ close atmp
$ if f$search("a.tmp") .eqs. "" -
then $ exit
$ ! all global definitions
$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
$ ! all procedures
$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
$ search c.tmp "symbol:"/out=d.tmp
$ def/user sys$output nl:
$ edito/edt/command=sys$input d.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=procedure)/whole
exit
$ ! all data
$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
$ search e.tmp "symbol:"/out=f.tmp
$ def/user sys$output nl:
$ edito/edt/command=sys$input f.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=data)/whole
exit
$ sort/nodupl d.tmp,f.tmp 'p2'
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
$ if f$search("x.tmp") .nes. "" -
then $ delete x.tmp;*
$!
$ EXIT_AA:
$ if V then set verify
$ endsubroutine
$!---------------vms_make.com for Freetype2 demos ------------------------------
$! make Freetype2 under OpenVMS
$!
$! In case of problems with the build you might want to contact me at
$! address@hidden(preferred) or address@hidden (Work)
$!
$!------------------------------------------------------------------------------
$!
$! Just some general constants
$!
$ Make = ""
$ true = 1
$ false = 0
$!
$! Setup variables holding "config" information
$!
$ name = "FT2demos"
$ optfile = name + ".opt"
$ ccopt = ""
$ lopts = ""
$!
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$! Which command parameters were given
$!
$ gosub check_opts
$!
$! Create option file
$!
$ open/write optf 'optfile'
$ If f$getsyi("HW_MODEL") .gt. 1024
$ Then
$ write optf "[-.lib]freetype2shr.exe/share"
$ else
$ write optf "[-.lib]freetype.olb/lib"
$ endif
$ write optf "sys$share:decw$xlibshr.exe/share"
$ close optf
$!
$ gosub crea_mms
$ 'Make'
$ delete/nolog/noconf ccop.mms;*,descrip.fdl;*
$ purge/nolog descrip.mms
$!
$ exit
$!
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms..."
$ copy sys$input: descrip.mms
$ deck
# This file is part of the FreeType project.
#
# DESCRIP.MMS: Make file for OpenVMS using MMS or MMK
# Created by Martin P.J. Zinser
# (address@hidden (preferred) or address@hidden (work))
.FIRST
define freetype [-.include.freetype]
CC = cc
# location of src for Test programs
SRCDIR = [.src]
GRAPHSRC = [.graph]
GRX11SRC = [.graph.x11]
OBJDIR = [.obj]
# include paths
INCLUDES = /include=([-.include],[.graph])
GRAPHOBJ = $(OBJDIR)grblit.obj, \
$(OBJDIR)grobjs.obj, \
$(OBJDIR)grfont.obj, \
$(OBJDIR)grinit.obj, \
$(OBJDIR)grdevice.obj,\
$(OBJDIR)grx11.obj
# C flags
CFLAGS = $(CCOPT)$(INCLUDES)/obj=$(OBJDIR)
ALL : ftlint.exe ftmemchk.exe ftdump.exe testnames.exe \
ftview.exe ftmulti.exe ftstring.exe fttimer.exe ftbench.exe
ftbench.exe : $(OBJDIR)ftbench.obj,$(OBJDIR)common.obj
link $(LOPTS)
$(OBJDIR)ftbench.obj,$(OBJDIR)common.obj,[]ft2demos.opt/opt
ftlint.exe : $(OBJDIR)ftlint.obj
link $(LOPTS) $(OBJDIR)ftlint.obj,[]ft2demos.opt/opt
ftmemchk.exe : $(OBJDIR)ftmemchk.obj
link $(LOPTS) $(OBJDIR)ftmemchk.obj,[]ft2demos.opt/opt
ftdump.exe : $(OBJDIR)ftdump.obj,$(OBJDIR)common.obj
link $(LOPTS) $(OBJDIR)ftdump.obj,common.obj,[]ft2demos.opt/opt
testnames.exe : $(OBJDIR)testnames.obj
link $(LOPTS) $(OBJDIR)testnames.obj,[]ft2demos.opt/opt
ftview.exe : $(OBJDIR)ftview.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftview.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
ftmulti.exe : $(OBJDIR)ftmulti.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftmulti.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
ftstring.exe : $(OBJDIR)ftstring.obj,$(OBJDIR)common.obj,$(GRAPHOBJ)
link $(LOPTS)
$(OBJDIR)ftstring.obj,common.obj,$(GRAPHOBJ),[]ft2demos.opt/opt
fttimer.exe : $(OBJDIR)fttimer.obj
link $(LOPTS) $(OBJDIR)fttimer.obj,[]ft2demos.opt/opt
$(OBJDIR)common.obj : $(SRCDIR)common.c , $(SRCDIR)common.h
$(OBJDIR)ftbench.obj : $(SRCDIR)ftbench.c
$(OBJDIR)ftlint.obj : $(SRCDIR)ftlint.c
$(OBJDIR)ftmemchk.obj : $(SRCDIR)ftmemchk.c
$(OBJDIR)ftdump.obj : $(SRCDIR)ftdump.c
$(OBJDIR)testnames.obj : $(SRCDIR)testnames.c
$(OBJDIR)ftview.obj : $(SRCDIR)ftview.c
$(OBJDIR)grblit.obj : $(GRAPHSRC)grblit.c
$(OBJDIR)grobjs.obj : $(GRAPHSRC)grobjs.c
$(OBJDIR)grfont.obj : $(GRAPHSRC)grfont.c
$(OBJDIR)grinit.obj : $(GRAPHSRC)grinit.c
set def $(GRAPHSRC)
$(CC)$(CCOPT)/include=([.x11],[])/define=(DEVICE_X11)/obj=[-.obj]
grinit.c
set def [-]
$(OBJDIR)grx11.obj : $(GRX11SRC)grx11.c
set def $(GRX11SRC)
$(CC)$(CCOPT)/obj=[--.obj]/include=([-]) grx11.c
set def [--]
$(OBJDIR)grdevice.obj : $(GRAPHSRC)grdevice.c
$(OBJDIR)ftmulti.obj : $(SRCDIR)ftmulti.c
$(OBJDIR)ftstring.obj : $(SRCDIR)ftstring.c
$(OBJDIR)fttimer.obj : $(SRCDIR)fttimer.c
CLEAN :
delete $(OBJDIR)*.obj;*,[]ft2demos.opt;*
# EOF
$ eod
$ anal/rms/fdl descrip.mms
$ open/write mmsf ccop.mms
$ write mmsf "CCOPT = ", ccopt
$ write mmsf "LOPTS = ", lopts
$ close mmsf
$ convert/fdl=descrip.fdl ccop.mms ccop.mms
$ copy ccop.mms,descrip.mms;-1 descrip.mms
$ return
$!------------------------------------------------------------------------------
$!
$! Check commandline options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$! if cparm .eqs. "link $(LOPTS)" then link only = true
$ if f$locate("LOPTS",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CCOPT",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
Dr. Martin P.J. Zinser Email: address@hidden
2512 Victor Avenue Phone: +1 312 523 6659
Glenview, IL, 60025 FAX: +1 312 408 3071
USA
- [Devel] Revised build process for OpenVMS Freetype 2.1.4,
zinser <=