Re: [Freeipmi-users] Problems with getting settings in freeipmi_interpret_sensor.conf to work

[Al Chu]

Hey Frank,

I went ahead and added it to this branch on github.


https://github.com/chu11/freeipmi-mirror/tree/interpret_drive_slot_transition_severity

./autogen.sh
./configure
ipmi-sensors/ipmi-sensors -h ... 

if you could give it a shot, I'd appreciate it.

Thanks,

Al

On Thu, 2019-02-07 at 10:13 -0800, Al Chu wrote:
> Hi Frank,
> 
> The IPMI_OEM_Value fields are specifically for OEM sensors in the
> sense
> that they are non-standard.  The drive slot sensor is standard, but
> the
> combo of "drive slot" and "transition severity" event type isn't
> supported.
> 
> I can add the support and give you a github branch to test out?
> 
> Al
> 
> On Thu, 2019-02-07 at 16:42 +0000, FRANK Michael wrote:
> > Hello,
> > 
> > I am having a couple of sensors on a Lenovo 650 server where the
> > state is not interpreted by freeipmi.
> > 
> > I use the following command:
> > 
> > ipmi-sensors -h 1.2.3.4 -u yyy -p xxx --entity-sensor-names -l USER
> > -D LAN_2_0 -r 124 --output-sensor-state
> > 
> > ID  | Name                 | Type       | State    | Reading    |
> > Units | Event
> > 124 | Group Drive Mismatch | Drive Slot | N/A      | N/A        |
> > N/A   | 'transition to OK'
> > 
> > I tried to address the State N/A with the following settings in
> > freeipmi_interpret_sensor.conf:
> > 
> > IPMI_OEM_Value 19046:1087 0x07 0x0D 0x0000 Nominal
> > 
> > I tried different values for the event bitmask and also
> > IPMI_OEM_Bitmask without success. The Sensor state couldn’t be
> > interpreted by the tool.
> > 
> > Can anyone may please help me what I have to add to the
> > freeipmi_interpret_sensor.conf to get the sensor state interpreted.
> > Any help to solve this issue is much appreciated.
> > 
> > Here are some details. Please let me know in case more info is
> > needed.
> > 
> > Sensor details:
> > 
> > Record ID: 124
> > Record Type: Compact Sensor Record (2h)
> > ID String: Drive Mismatch
> > Sensor Type: Drive Slot (Dh)
> > Sensor Number: 124
> > IPMB Slave Address: 10h
> > Sensor Owner ID: 20h
> > Sensor Owner LUN: 0h
> > Channel Number: 0h
> > Entity ID: Group (37)
> > Entity Instance: 4
> > Entity Instance Type: Logical Container Entity
> > Event/Reading Type Code: 7h
> > Sensor Direction: Unspecified
> > Assertion Event Enabled: 'transition to Critical from less severe'
> > Deassertion Event Enabled: 'transition to Critical from less
> > severe'
> > Share Count: 0
> > ID String Instance Modifier Type: Numeric
> > ID String Instance Modifier Offset: 0
> > Entity Instance Sharing: Same for all records
> > Sensor State: N/A
> > Sensor Event: 'transition to OK'
> > 
> > Board details:
> > 
> > Device ID             : 32
> > Device Revision       : 0
> > Device SDRs           : unsupported
> > Firmware Revision     : 2.10
> > Device Available      : yes (normal operation)
> > IPMI Version          : 2.0
> > Sensor Device         : supported
> > SDR Repository Device : supported
> > SEL Device            : supported
> > FRU Inventory Device  : supported
> > IPMB Event Receiver   : supported
> > IPMB Event Generator  : supported
> > Bridge                : unsupported
> > Chassis Device        : supported
> > Manufacturer ID       : Lenovo Group (19046)
> > Product ID            : 1087
> >  
> > Device GUID : 1f635e0a-d37e-5bbd-11e8-a54a47832434
> >  
> > System GUID : 1f635e0a-d37e-5bbd-11e8-a54a47832434
> > 
> > 
> > 
> > Michael FRANK
> > Supervisor Global Monitoring Architecture
> > Faurecia Clean Mobility
> > T +49 821 4103 420 ● M +49 171 9967 206
> > address@hidden
> > Faurecia Emissions Control Technologies, Germany GmbH -
> > Biberbachstraße 9 – 86154 Augsburg – Germany
> > 
> > Sitz der Gesellschaft: Augsburg - Registergericht Augsburg HR B
> > 20757
> > Geschäftsführer: Mathias Miedrich, Françoise Crenn, Thomas Hanak
> > Vorsitzender des Aufsichtsrats: Christophe Schmitt
> > 
> > 
> > 
> > 
> > This electronic transmission (and any attachments thereto) is
> > intended solely for the use of the addressee(s). It may contain
> > confidential or legally privileged information. If you are not the
> > intended recipient of this message, you must delete it immediately
> > and notify the sender. Any unauthorized use or disclosure of this
> > message is strictly prohibited.  Faurecia does not guarantee the
> > integrity of this transmission and shall therefore never be liable
> > if
> > the message is altered or falsified nor for any virus, interception
> > or damage to your system.
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> 
> 
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users