[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-users] Re:Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320S
From: |
Schäfer Raumgestaltung |
Subject: |
[Freeipmi-users] Re:Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2 |
Date: |
Sat, 1 Sep 2007 20:52:38 +0200 |
Hi Bala,
hope this is no double posting (my first attempt didn't show up in the mailing
list for hours)
below some output of several commands.....
ipmi-fru, ipmi-sel behave like ipmi-sensors (with driver-address provided)
what's the difference between
IPMI locate driver: DMIDECODE
and
IPMI locate driver: SMBIOS
got from ipmi-locate
hth
Uli
>ipmi-sensors --debug -D ssif
ipmi-udm.c: 329: ipmi_open_inband: errnum (22): expression failed
ipmi-udm.c: 616: ipmi_close_device: errnum (11): expression failed
ipmi_open_inband: driver path required
############################################################################
############################
>ipmi-sensors --debug -D smic
ipmi-udm.c: 616: ipmi_close_device: errnum (11): expression failed
ipmi_open_inband: device not supported
############################################################################
############################
>ipmi-sensors --debug -D openipmi
ipmi-udm.c: 458: ipmi_open_inband: errnum (5): expression failed
ipmi-udm.c: 616: ipmi_close_device: errnum (11): expression failed
ipmi_open_inband: device not found
############################################################################
############################
>ipmi-sensors --debug -D kcs
ipmi-locate-smbios.c: 385: ipmi_locate_smbios_get_dev_info: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (0): expression failed
ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (0): expression
failed
ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (0):
expression failed
ipmi-locate-acpi-spmi.c: 1239: ipmi_locate_acpi_spmi_get_dev_info: errno
(0): expression failed
Fetching SDR repository information...
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 20h] = cmd[ 8b]
================================================================
------------> keeps hanging <--------
############################################################################
############################
>ipmi-sensors --debug -D ssif --driver-device /dev/i2c-0 --driver-address
0x84
ipmi-ssif-api.c: 547: ipmi_ssif_ctx_io_init: errno (22): expression failed
ipmi-udm.c: 444: ipmi_open_inband: errnum (11): expression failed
ipmi-udm.c: 616: ipmi_close_device: errnum (11): expression failed
ipmi_open_inband: internal error
############################################################################
############################
... somebody must be out there ;-))
>ipmi-raw -D ssif --driver-device /dev/i2c-0 0 6 1
rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
>ipmi-raw -D ssif --driver-device /dev/i2c-0 --driver-address 0x84 0 6 1
rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
############################################################################
############################
>bmc-info --debug -D ssif --driver-device /dev/i2c-0 --driver-address
0x42
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 20h] = device_id[ 8b]
[ 1h] = device_revision.revision[ 4b]
[ 0h] = device_revision.reserved1[ 3b]
[ 1h] = device_revision.sdr_support[ 1b]
[ 2h] = firmware_revision1.major_revision[ 7b]
[ 0h] = firmware_revision1.device_available[ 1b]
[ 40h] = firmware_revision2.minor_revision[ 8b]
[ 1h] = ipmi_version.ms_bits[ 4b]
[ 5h] = ipmi_version.ls_bits[ 4b]
[ 1h] = additional_device_support.sensor_device[ 1b]
[ 1h] = additional_device_support.sdr_repository_device[ 1b]
[ 1h] = additional_device_support.sel_device[ 1b]
[ 1h] = additional_device_support.fru_inventory_device[ 1b]
[ 1h] = additional_device_support.ipmb_event_receiver[ 1b]
[ 0h] = additional_device_support.ipmb_event_generator[ 1b]
[ 0h] = additional_device_support.bridge[ 1b]
[ 1h] = additional_device_support.chassis_device[ 1b]
[ 322h] = manufacturer_id.id[20b]
[ 0h] = manufacturer_id.reserved1[ 4b]
[ 4311h] = product_id[16b]
================================================================
Device ID: 20
Device Revision: 1
[SDR Support]
Firmware Revision: 2.64
[Device Available (normal operation)]
IPMI Version: 1.5
Additional Device Support:
[Sensor Device]
[SDR Repository Device]
[SEL Device]
[FRU Inventory Device]
[IPMB Event Receiver]
[Chassis Device]
Manufacturer ID: 322h
Product ID: 4311h
Aux Firmware Revision Info: 0h
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 4h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 1h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 2h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 2h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 3h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 4h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 5h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 6h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 7h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
Channel Information:
Channel No: 1
Medium Type: 802.3 LAN
Protocol Type: IPMB-1.0
Channel No: 2
Medium Type: System Interface (KCS, SMIC, or BT)
Protocol Type: IPMI-SMBus
############################################################################
############################
>bmc-config --debug -D ssif --driver-device /dev/i2c-0 --driver-address
0x42 --checkout
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 20h] = device_id[ 8b]
[ 1h] = device_revision.revision[ 4b]
[ 0h] = device_revision.reserved1[ 3b]
[ 1h] = device_revision.sdr_support[ 1b]
[ 2h] = firmware_revision1.major_revision[ 7b]
[ 0h] = firmware_revision1.device_available[ 1b]
[ 40h] = firmware_revision2.minor_revision[ 8b]
[ 1h] = ipmi_version.ms_bits[ 4b]
[ 5h] = ipmi_version.ls_bits[ 4b]
[ 1h] = additional_device_support.sensor_device[ 1b]
[ 1h] = additional_device_support.sdr_repository_device[ 1b]
[ 1h] = additional_device_support.sel_device[ 1b]
[ 1h] = additional_device_support.fru_inventory_device[ 1b]
[ 1h] = additional_device_support.ipmb_event_receiver[ 1b]
[ 0h] = additional_device_support.ipmb_event_generator[ 1b]
[ 0h] = additional_device_support.bridge[ 1b]
[ 1h] = additional_device_support.chassis_device[ 1b]
[ 322h] = manufacturer_id.id[20b]
[ 0h] = manufacturer_id.reserved1[ 4b]
[ 4311h] = product_id[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 4h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 1h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 2h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
Section User1
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 46h] = cmd[ 8b]
[ 1h] = user_id[ 6b]
[ 0h] = user_id.reserved[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 46h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ BYTE ARRAY ... ] = user_name[16B]
[ 00h 00h 00h 00h 00h 00h 00h 00h ]
[ 00h 00h 00h 00h 00h 00h 00h 00h ]
================================================================
## Give Username
Username NULL
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
## Possible values: Yes/No or blank to not set
## Enable_User
## Give password or blank to clear. MAX 16 chars.
## Password
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 47h] = cmd[ 8b]
[ 1h] = user_id[ 6b]
[ 0h] = user_id.reserved[ 1b]
[ 1h] = password_size[ 1b]
[ 3h] = operation[ 2b]
[ 0h] = operation.reserved[ 6b]
[ BYTE ARRAY ... ] = password[20B]
[ 66h 6Fh 6Fh 62h 61h 72h 00h 00h ]
[ 00h 00h 00h 00h 00h 00h 00h 00h ]
[ 00h 00h 00h 00h ]
================================================================
ipmi-ssif-api-udm.c: 81: ipmi_ssif_cmd_udm: errnum (4): expression failed
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs Yes
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
## Possible values: Yes/No
Lan_Enable_Link_Auth Yes
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
## Possible values:
Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit Administrator
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 4Dh] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 0h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 0h] = reserved1[ 1b]
[ 0h] = standard_payload_1[ 1b]
[ 0h] = standard_payload_2[ 1b]
[ 0h] = standard_payload_3[ 1b]
[ 0h] = standard_payload_4[ 1b]
[ 0h] = standard_payload_5[ 1b]
[ 0h] = standard_payload_6[ 1b]
[ 0h] = standard_payload_7[ 1b]
[ 0h] = reserved2[ 8b]
[ 0h] = oem_payload_0[ 1b]
[ 0h] = oem_payload_1[ 1b]
[ 0h] = oem_payload_2[ 1b]
[ 0h] = oem_payload_3[ 1b]
[ 0h] = oem_payload_4[ 1b]
[ 0h] = oem_payload_5[ 1b]
[ 0h] = oem_payload_6[ 1b]
[ 0h] = oem_payload_7[ 1b]
[ 0h] = reserved3[ 8b]
================================================================
## Possible values: Yes/No
SOL_Payload_Access No
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is different from 'Invalid data field' (CCh)
code in that it indicates that the erroneous field(s) has a contiguous range
of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 4h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 1h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 2h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 2h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 2h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ Ch] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 4h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 1h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 322h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 3h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 0h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 0h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 0h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 0h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 0h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 4h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
[ 0h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 0h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 0h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 0h] = session_support[ 2b]
[ 0h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 346: ipmi_cmd_get_channel_info: errmsg =
Parameter out of range. One or more parameters in the data field of the
Request are out of range. This is d
---- snip .----
<Original Message: >2
Date: Wed, 29 Aug 2007 23:26:38 -0700 (PDT)
From: "Bala.A" <address@hidden>
Subject: [Freeipmi-users] Re: Freeipmi-users Digest, Vol 26, Issue 13
To: Sch?fer Raumgestaltung <address@hidden>
Cc: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain;charset=iso-8859-1
Hi Uli,
Fetching SDR repository information failed and none of SDR fetching
commands succeeded. Strangely there is no error code.
Could you try running ipmi-sensors by
ipmi-sensors --debug -D ssif
and
ipmi-sensors --debug -D ssif with different driver-device and
driver-address?
Also, please try running other freeipmi tools whether they work in your
machine or not.
Thanks,
Regards,
Bala
---
Free as in freedom
http://www.gnu.org/
> Hi Bala,
>
> thanks for your reply
>
> >ipmi-sensors --debug without additional parameters seems not to
> be
> able to find SSIF-Interface ?
>
> providing more parameters like
>
> >ipmi-sensors --debug -D ssif --driver-device
> dev/i2c-0 --driver-address 0x42
>
> looks like getting some more ? Information but ends up with : SDR Cache
> creation failed: internal error
>
> please find output of both below.......
>
> Regards
> Uli
>
>
>>ipmi-sensors -f
>
> flushing cache... done
>
>> ipmi-sensors --debug
>
> ipmi-udm.c: 458: ipmi_open_inband: errnum (5): expression failed
> ipmi-locate-smbios.c: 385: ipmi_locate_smbios_get_dev_info: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 918: ipmi_acpi_get_table: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 681: ipmi_ioremap: errno (9): expression failed
> ipmi-locate-acpi-spmi.c: 720: ipmi_get_physical_mem_data: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 839: ipmi_acpi_get_rsdp: errno (9): expression
> failed
> ipmi-locate-acpi-spmi.c: 1034: ipmi_acpi_get_firmware_table: errno (9):
> expression failed
> ipmi-locate-acpi-spmi.c: 1239: ipmi_locate_acpi_spmi_get_dev_info: errno
> (9): expression failed
> Fetching SDR repository information...
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 20h] = cmd[ 8b]
> ================================================================
>
> ^C
> -----> hangs in infinite loop <--------------
>
>
############################################################################
> ############################
>
############################################################################
> ############################
>
> second attempt providing device and address.........
>
>>ipmi-sensors -f
>
> flushing cache... done
>
>>ipmi-sensors --debug -D ssif --driver-device /dev/i2c-0
>> --driver-address
> 0x42
> Fetching SDR repository information...
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 20h] = cmd[ 8b]
> ================================================================
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 0h] = cmd[ 8b]
> [ 0h] = comp_code[ 8b]
> [ 0h] = sdr_version_major[ 4b]
> [ 0h] = sdr_version_minor[ 4b]
> [ 0h] = record_count[16b]
> [ 0h] = free_space[16b]
> [ 0h] = most_recent_addition_timestamp[32b]
> [ 0h] = most_recent_erase_timestamp[32b]
> [ 0h] =
> get_sdr_repository_allocation_info_command_supported[ 1b]
> [ 0h] = reserve_sdr_repository_command_supported[ 1b]
> [ 0h] = partial_add_sdr_command_supported[ 1b]
> [ 0h] = delete_sdr_command_supported[ 1b]
> [ 0h] = reserved[ 1b]
> [ 0h] =
> modal_non_modal_sdr_repository_update_operation_supported[ 2b]
> [ 0h] = overflow_flag[ 1b]
> ================================================================
> done
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 22h] = cmd[ 8b]
> ================================================================
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 0h] = cmd[ 8b]
> [ 0h] = comp_code[ 8b]
> [ 0h] = reservation_id[16b]
> ================================================================
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 23h] = cmd[ 8b]
> [ 0h] = reservation_id[16b]
> [ 0h] = record_id[16b]
> [ 0h] = offset_into_record[ 8b]
> [ 5h] = bytes_to_read[ 8b]
> ================================================================
> ================================================================
> [ VALUE TAG NAME:LENGTH ]
> ================================================================
> [ 0h] = cmd[ 8b]
> [ 0h] = comp_code[ 8b]
> [ 0h] = next_record_id[16b]
> [ BYTE ARRAY ... ] = record_data[255B]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
> [ 00h 00h 00h 00h 00h 00h 00h ]
> ================================================================
> FAILED: Retrieval of SDR record 0x0
> SDR Cache creation failed: internal error
>
>
>
############################################################################
> ############################
>
############################################################################
> ############################
>
- [Freeipmi-users] Re:Freeipmi 0.4.3 Problem reading Intel mBMC on SE7320SP2,
Schäfer Raumgestaltung <=