Re: [Freeipmi-devel] Supermicro X7DBR-3 CPU Temperatur Sensors

[Werner Fischer]

Hi again,

the customer just sent me also bmc-info of another system with
X8DT3-LN4F board - see
http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3-LN4F.cfm

The X8DT3-LN4F also lacks output for CPU temperatures. Here is its
bmc-info:

Device ID             : 32
Device Revision       : 1
Device SDRs           : unsupported
Firmware Revision     : 2.03
Device Available      : yes (normal operation)
IPMI Version          : 2.0
Sensor Device         : supported
SDR Repository Device : supported
SEL Device            : supported
FRU Inventory Device  : supported
IPMB Event Receiver   : supported
IPMB Event Generator  : supported
Bridge                : unsupported
Chassis Device        : supported
Manufacturer ID       : Super Micro Computer Inc. (47488)
Product ID            : 43707
Auxiliary Firmware Revision Information : 00000001h

GUID : 00000000-0000-0000-0000-000000434D53

System Firmware Version       : rsion1.0
System Name                   : Manager
Primary Operating System Name : SE Server 1.0
Operating System Name         : 

Channel Information

Channel Number       : 0
Medium Type          : IPMB (I2C)
Protocol Type        : IPMB-1.0
Active Session Count : 0
Session Support      : session-less
Vendor ID            : Intelligent Platform Management Interface forum (7154)

Channel Number       : 1
Medium Type          : 802.3 LAN
Protocol Type        : IPMB-1.0
Active Session Count : 1
Session Support      : multi-session
Vendor ID            : Intelligent Platform Management Interface forum (7154)

best regards,
Werner

On Mon, 2011-02-14 at 11:33 +0100, Werner Fischer wrote:
> Hi Al,
> 
>       * one of our customers discovered another Supermicro system where
>         FreeIPMI has currently no product ID information to display the
>         OEM CPU temp sensors (he tried up to
>         freeipmi-1.0.2.beta2.tar.gz)
>       * It is a 6015B-3R
>         http://www.supermicro.com/products/system/1U/6015/SYS-6015B-3R.cfm 
> with a X7DBR-3 mainboard 
> http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBR-3.cfm 
> Below I have attached his output of bmc-info.
> 
> My questions
>      1. Can you add the Manufacturer-ID/Product-ID for the OEM CPU temp
>         sensors for this board? (As it is a X7-board it has IPMI not
>         onboard (like the X8-boards do), but it uses the AOC-SIMSO(+)
>         add on card for IPMI. Therefore the Manufacturer ID is Peppercon
>         (not Supermicro).)
>      2. If it is not too difficult for me and if it could lower your
>         necessary work: Maybe you can tell me where the
>         Manufacturer-ID/Product-ID are matched in the FreeIPMI code for
>         the OEM sensors (so I could try add them myself in the source
>         and I could send you directly patches)
> 
> Thanks for your help and best regards,
> Werner
> 
> PS: Here is the output of bmc-info:
> 
> Device ID             : 34
> Device Revision       : 1
> Device SDRs           : unsupported
> Firmware Revision     : 1.59
> Device Available      : yes (normal operation)
> IPMI Version          : 2.0
> Sensor Device         : supported
> SDR Repository Device : supported
> SEL Device            : supported
> FRU Inventory Device  : supported
> IPMB Event Receiver   : unsupported
> IPMB Event Generator  : unsupported
> Bridge                : unsupported
> Chassis Device        : supported
> Manufacturer ID       : Peppercon AG (10437)
> Product ID            : 4
> Auxiliary Firmware Revision Information : 20540000h
> 
> GUID : 0F0E0D0C-0B0A-0908-BD20-9BFEFF483002
> 
> Channel Information
> 
> Channel Number       : 1
> Medium Type          : 802.3 LAN
> Protocol Type        : IPMB-1.0
> Active Session Count : 1
> Session Support      : multi-session
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> 
> Channel Number       : 5
> Medium Type          : Asynch. Serial/Modem (RS-232)
> Protocol Type        : IPMB-1.0
> Active Session Count : 0
> Session Support      : single-session
> Vendor ID            : Intelligent Platform Management Interface forum
> (7154)
> 
>