[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] sensors ok vs. alert
From: |
Anand Babu |
Subject: |
Re: [Freeipmi-devel] sensors ok vs. alert |
Date: |
Mon, 14 Jun 2004 13:47:01 -0700 |
User-agent: |
Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux) |
Hi Robin,
I will take the responsibility to work with Intel to get a new SDR
update.
-- Anand Babu
,----[ address@hidden ]
| I agree with AB that if these sensor values are actually "ok" then
| Intel ought to change the nominal min/max values to reflect this.
| When we first set up our host monitoring software on thunder, I
| noticed a large number of sensor values out of range and tried to get
| Bryan Rice from Intel to investigate but I never succeed in getting
| him onto our system.
|
| AB, would you please go through CDC's channels with Intel to open a
| problem report on this and get a determination from Intel as to
| whether these sensor readings are really ok or if they indicate a real
| hardware problem? If the former, then I wold like them to change
| their nominal limits. If the latter, then we will want CDC or Intel
| to assist us with identifying and replacing the affected hardware
| components, since this affects nearly half of thunder.
`----
>
> ,----[ Albert Chu <address@hidden> ]
> | Hey AB,
> |
> | We've noticed on a thunder that as many as 50% of nodes are showings
> | alerts for voltage sensors. I don't believe this is bad, b/c the
> | voltages are within the lower and upper critical range. However,
> | since fish/sensors uses the normal min/max range, many sensors are
> | showing alerts (IMHO) more often than is appropriate.
> |
> | I'm in discussion with the admins about their preference for output of
> | ranges and alerts, but I think something should be changed in
> | fish/sensors. If I understand this correctly, we can use the readable
> | threshold mask (field 20 of the full sensor data record) to determine
> | which ranges are available.
> |
> | I'm going to add a feature request on this to FreeIPMI so we don't
> | forget.
> |
> | Al
> `----
> Hi Al,
> How about, Intel increasing the nominal min/max if they believe that
> the condition is normal.
>
> Otherwise, I will work with Bala and come up with a good alerting
> policy for sensors tool.
>
> I think,
> crossing nominal min/max limits should still be ALERT and
> crossing critical min/max limits as CRITICAL.
>
> I will take a look at threshold mask too.
>
> --
> Anand Babu
> Free as in Freedom <www.gnu.org>
>
>
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/freeipmi-devel
>
--
Anand Babu
Free as in Freedom <www.gnu.org>