[fluid-dev] [PATCH 7/9] Remove some autotools files which will be installed by autoreconf

[Antonio Ospite]

Also replace mkinstalldirs with "install-sh -d", newer automake versions
do not install mkinstalldirs anymore.
---
 fluidsynth/CMakeLists.txt  |   4 +-
 fluidsynth/doc/Makefile.am |   2 +-
 fluidsynth/install-sh      | 251 ---------------------------------
 fluidsynth/missing         | 336 ---------------------------------------------
 fluidsynth/mkinstalldirs   |  99 -------------
 5 files changed, 3 insertions(+), 689 deletions(-)
 delete mode 100755 fluidsynth/install-sh
 delete mode 100755 fluidsynth/missing
 delete mode 100755 fluidsynth/mkinstalldirs

diff --git a/fluidsynth/CMakeLists.txt b/fluidsynth/CMakeLists.txt
index c76b754..04a2f6d 100644
--- a/fluidsynth/CMakeLists.txt
+++ b/fluidsynth/CMakeLists.txt
@@ -461,11 +461,11 @@ if ( UNIX )
         COMMAND cp -r include ${PACKAGE}-${VERSION}
         COMMAND cp -r src ${PACKAGE}-${VERSION}
         COMMAND cp AUTHORS ChangeLog CMakeLists.txt COPYING ${PACKAGE}.* 
INSTALL NEWS README* THANKS TODO ${PACKAGE}-${VERSION}
-        COMMAND cp acinclude.m4 autogen.sh configure.ac install-sh missing 
mkinstalldirs Makefile.am ${PACKAGE}-${VERSION}
+        COMMAND cp acinclude.m4 autogen.sh configure.ac Makefile.am 
${PACKAGE}-${VERSION}
         # Files below are added when running autogen.sh
         # COMMAND cp -r autom4te.cache ${PACKAGE}-${VERSION}
         COMMAND cp -r m4 ${PACKAGE}-${VERSION}
-        COMMAND cp aclocal.m4 compile config.guess config.sub configure 
depcomp ltmain.sh Makefile.in ${PACKAGE}-${VERSION}
+        COMMAND cp aclocal.m4 compile config.guess config.sub configure 
depcomp install-sh ltmain.sh missing Makefile.in ${PACKAGE}-${VERSION}
         COMMAND tar -cj --exclude .svn -f ${PACKAGE}-${VERSION}.tar.bz2 
${PACKAGE}-${VERSION}
         COMMAND tar -cz --exclude .svn -f ${PACKAGE}-${VERSION}.tar.gz 
${PACKAGE}-${VERSION}
         COMMAND zip -qr ${PACKAGE}-${VERSION}.zip ${PACKAGE}-${VERSION} -x 
'*.svn*'
diff --git a/fluidsynth/doc/Makefile.am b/fluidsynth/doc/Makefile.am
index 894c1b3..34622b7 100644
--- a/fluidsynth/doc/Makefile.am
+++ b/fluidsynth/doc/Makefile.am
@@ -25,7 +25,7 @@ update-docs: html/index.html doxygen
 # The new XML DocBook way:
 html/index.html: $(docbook_docs)
        -rm -rf html
-       $(mkinstalldirs) html
+       $(install_sh) -d html
        xsltproc -o html/ --catalogs $(DOCBOOK_STYLESHEET) $<
 
 doc-clean:
diff --git a/fluidsynth/install-sh b/fluidsynth/install-sh
deleted file mode 100755
index 11870f1..0000000
--- a/fluidsynth/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-       -c) instcmd="$cpprog"
-           shift
-           continue;;
-
-       -d) dir_arg=true
-           shift
-           continue;;
-
-       -m) chmodcmd="$chmodprog $2"
-           shift
-           shift
-           continue;;
-
-       -o) chowncmd="$chownprog $2"
-           shift
-           shift
-           continue;;
-
-       -g) chgrpcmd="$chgrpprog $2"
-           shift
-           shift
-           continue;;
-
-       -s) stripcmd="$stripprog"
-           shift
-           continue;;
-
-       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-           shift
-           continue;;
-
-       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-           shift
-           continue;;
-
-       *)  if [ x"$src" = x ]
-           then
-               src=$1
-           else
-               # this colon is to work around a 386BSD /bin/sh bug
-               :
-               dst=$1
-           fi
-           shift
-           continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-       echo "install:  no input file specified"
-       exit 1
-else
-       :
-fi
-
-if [ x"$dir_arg" != x ]; then
-       dst=$src
-       src=""
-       
-       if [ -d $dst ]; then
-               instcmd=:
-               chmodcmd=""
-       else
-               instcmd=$mkdirprog
-       fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-       if [ -f "$src" ] || [ -d "$src" ]
-       then
-               :
-       else
-               echo "install:  $src does not exist"
-               exit 1
-       fi
-       
-       if [ x"$dst" = x ]
-       then
-               echo "install:  no destination specified"
-               exit 1
-       else
-               :
-       fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-       if [ -d $dst ]
-       then
-               dst="$dst"/`basename $src`
-       else
-               :
-       fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-       '
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-       pathcomp="${pathcomp}${1}"
-       shift
-
-       if [ ! -d "${pathcomp}" ] ;
-        then
-               $mkdirprog "${pathcomp}"
-       else
-               :
-       fi
-
-       pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-       $doit $instcmd $dst &&
-
-       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
-       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
-       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
-       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-       if [ x"$transformarg" = x ] 
-       then
-               dstfile=`basename $dst`
-       else
-               dstfile=`basename $dst $transformbasename | 
-                       sed $transformarg`$transformbasename
-       fi
-
-# don't allow the sed command to completely eliminate the filename
-
-       if [ x"$dstfile" = x ] 
-       then
-               dstfile=`basename $dst`
-       else
-               :
-       fi
-
-# Make a temp file name in the proper directory.
-
-       dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-       $doit $instcmd $src $dsttmp &&
-
-       trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
-       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
-       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
-       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
-       $doit $rmcmd -f $dstdir/$dstfile &&
-       $doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/fluidsynth/missing b/fluidsynth/missing
deleted file mode 100755
index 6a37006..0000000
--- a/fluidsynth/missing
+++ /dev/null
@@ -1,336 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <address@hidden>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' 
${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-                                      sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-          sed 's/\.am$/.in/' |
-          while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-       touch $file
-    else
-       test -z "$file" || exec >$file
-       echo "#! /bin/sh"
-       echo "# Created by GNU Automake missing as a replacement of"
-       echo "#  $ $@"
-       echo "exit 0"
-       chmod +x $file
-       exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-       case "$LASTARG" in
-       *.y)
-           SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-           if [ -f "$SRCFILE" ]; then
-                cp "$SRCFILE" y.tab.c
-           fi
-           SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-           if [ -f "$SRCFILE" ]; then
-                cp "$SRCFILE" y.tab.h
-           fi
-         ;;
-       esac
-    fi
-    if [ ! -f y.tab.h ]; then
-       echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-       echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-       case "$LASTARG" in
-       *.l)
-           SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-           if [ -f "$SRCFILE" ]; then
-                cp "$SRCFILE" lex.yy.c
-           fi
-         ;;
-       esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-       echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-        you modified a dependency of a manual page.  You may need the
-        \`Help2man' package in order for those modifications to take
-        effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-       file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-       touch $file
-    else
-       test -z "$file" || exec >$file
-       echo ".ab help2man is required to generate this page"
-       exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/address@hidden/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-       case "$firstarg" in
-       *o*)
-           firstarg=`echo "$firstarg" | sed s/o//`
-           tar "$firstarg" "$@" && exit 0
-           ;;
-       esac
-       case "$firstarg" in
-       *h*)
-           firstarg=`echo "$firstarg" | sed s/h//`
-           tar "$firstarg" "$@" && exit 0
-           ;;
-       esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
diff --git a/fluidsynth/mkinstalldirs b/fluidsynth/mkinstalldirs
deleted file mode 100755
index 8ab885e..0000000
--- a/fluidsynth/mkinstalldirs
+++ /dev/null
@@ -1,99 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <address@hidden>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-   case "${1}" in
-     -h | --help | --h* )                      # -h for help
-       echo "${usage}" 1>&2; exit 0 ;;
-     -m )                                      # -m PERM arg
-       shift
-       test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
-       dirmode="${1}"
-       shift ;;
-     -- ) shift; break ;;                      # stop option processing
-     -* ) echo "${usage}" 1>&2; exit 1 ;;      # unknown option
-     * )  break ;;                             # first non-opt arg
-   esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-0) exit 0 ;;
-esac
-
-case $dirmode in
-'')
-  if mkdir -p -- . 2>/dev/null; then
-    echo "mkdir -p -- $*"
-    exec mkdir -p -- "$@"
-  fi ;;
-*)
-  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-    echo "mkdir -m $dirmode -p -- $*"
-    exec mkdir -m "$dirmode" -p -- "$@"
-  fi ;;
-esac
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-       echo "mkdir $pathcomp"
-
-       mkdir "$pathcomp" || lasterr=$?
-
-       if test ! -d "$pathcomp"; then
-         errstatus=$lasterr
-       else
-         if test ! -z "$dirmode"; then
-            echo "chmod $dirmode $pathcomp"
-
-            lasterr=""
-            chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-            if test ! -z "$lasterr"; then
-              errstatus=$lasterr
-            fi
-         fi
-       fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 3
-# End:
-# mkinstalldirs ends here
-- 
2.1.1