emacs-orgmode
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [O] Table formula bug? (TBLFM line populated, but C-c = prompt is em


From: Cook, Malcolm
Subject: Re: [O] Table formula bug? (TBLFM line populated, but C-c = prompt is empty)
Date: Tue, 24 Nov 2015 18:11:01 +0000

> > I just noticed that upon editing a table formula, C-u C-c C-c was updating 
> > all
 > but the first instance of formula (all but the first row).
 > >
 > > Org-mode version 8.3.2
 > >
 > > Could this be related issue?
 > 
 > If it was, I can't reproduce it with the latest pull that fixed my
 > reported issue (I'm now on Org-mode version 8.3.2
 > (release_8.3.2-342-g50359f @ /home/jwhendy/.elisp/org.git/lisp/)).
 > 
 > In my test, I used =$-1 + 2 for a column formula in row 1, populated
 > the column with C-u C-c C-c, and then changed row 3's entry to =$-1 +
 > 3. Issuing C-u C-c C-c properly updated all rows.

Hi John - thanks - must be finger trouble on my end - I can no longer reproduce 
it (but have updated org just for good measure anyway).

~Malcolm

 > 
 > 
 > John
 > 
 > >
 > >
 > >  > -----Original Message-----
 > >  > From: address@hidden
 > [mailto:emacs-
 > >  > address@hidden On Behalf Of John Hendy
 > >  > Sent: Monday, November 23, 2015 5:57 PM
 > >  > To: John Hendy <address@hidden>; emacs-orgmode <emacs-
 > >  > address@hidden>
 > >  > Subject: Re: [O] Table formula bug? (TBLFM line populated, but C-c =
 > prompt
 > >  > is empty)
 > >  >
 > >  > Confirmed fixed -- thanks!
 > >  >
 > >  > John
 > >  >
 > >  > On Mon, Nov 23, 2015 at 4:24 PM, Nicolas Goaziou
 > <address@hidden>
 > >  > wrote:
 > >  > > Hello,
 > >  > >
 > >  > > John Hendy <address@hidden> writes:
 > >  > >
 > >  > >> I was just creating a table and using a formula, finding that C-c =
 > >  > >> did not bring up the formula, but acted like I was inputting one for
 > >  > >> the first time. I created a min-config and test file to see if this
 > >  > >> was something related to my setup, but it seems I can reproduce.
 > >  > >>
 > >  > >> Org-mode version 8.3.2 (release_8.3.2-338-g522ec9 @
 > >  > >> /home/jwhendy/.elisp/org.git/lisp/)
 > >  > >>
 > >  > >> #+begin_src min-config
 > >  > >> ;; set load paths
 > >  > >> ;; set load dirs and global config options
 > >  > >> (add-to-list 'load-path "~/.elisp/org.git/lisp/")
 > >  > >> (add-to-list 'load-path "~/.elisp/org.git/contrib/lisp")
 > >  > >> #+end_src
 > >  > >>
 > >  > >> Emacs started with =emacs -Q=, followed by =M-x load-file RET
 > >  > >> ~/Desktop/min-config RET=
 > >  > >>
 > >  > >> #+begin_src table-test.org
 > >  > >>
 > >  > >> * Headline
 > >  > >>
 > >  > >> | something | something else |
 > >  > >> |-----------+----------------|
 > >  > >> |         1 |              3 |
 > >  > >> |         2 |                |
 > >  > >> |         3 |                |
 > >  > >> |         4 |                |
 > >  > >> #+TBLFM: $2=1+2
 > >  > >>
 > >  > >> #+end_src
 > >  > >>
 > >  > >> I created the contents in row 1 col 2 by entering "=1+2 RET". With
 > >  > >> cursor in row 2 col 2, I press C-c = and see the attached (empty
 > >  > >> prompt for a column 2 formula). If I type in 1+2 and press return, 
 > > the
 > >  > >> TBLFM line changes to:
 > >  > >>
 > >  > >> #+TBLFM: $2=1+2::$$2=1+2
 > >  > >>
 > >  > >> If I go to row 3 and C-c = again, pressing RET to accept the default
 > >  > >> (maybe the formula is "stored" but just not displayed?), it changes 
 > > to
 > >  > >> (and nothing is put in row 3 col 2):
 > >  > >>
 > >  > >> #+TBLFM: $$2=1+2
 > >  > >>
 > >  > >> If I go to row 4 and do this one more time, pressing RET with empty
 > >  > >> formula, it leaves an empty TBLFM line under the table.
 > >  > >
 > >  > > Fixed. Thank you.
 > >  > >
 > >  > >
 > >  > > Regards,
 > >  > >
 > >  > > --
 > >  > > Nicolas Goaziou
 > >

reply via email to

[Prev in Thread] Current Thread [Next in Thread]