Re: [Orgmode] allow table* specification with #+ATTR_LaTeX:

[Eric Schulte]

Ah! you caught me :)

I've just pushed up documentation. -- Eric

Carsten Dominik <address@hidden> writes:

> This is great, I like it.  Maybe a change to the manual
> would be appropriate?
>
> Best wishes
>
> - Carsten
>
> On Dec 17, 2010, at 9:39 PM, Eric Schulte wrote:
>
>> Hi Tom,
>>
>> Thanks for all you help on this front.  I've just pushed up the patch
>> with your suggested syntax (which is much better than my original).
>> It
>> allows the following behavior.
>>
>> The following org
>> #+begin_src org
>>  #+CAPTION: A wide table with tabulary
>>  #+LABEL: tbl:wide
>>  #+ATTR_LaTeX: table* tabulary width=\textwidth align=l|lp{3cm}r|l
>>  | 1 | 2 | 3 |
>>  | 4 | 5 | 6 |
>>
>>  #+CAPTION: A normal table with tabularx
>>  #+LABEL: tbl:wide
>>  #+ATTR_LaTeX: table tabularx width=\textwidth align=l|lp{3cm}r|l
>>  | 1 | 2 | 3 |
>>  | 4 | 5 | 6 |
>>
>>  and now a simple table
>>
>>  | 1 | 2 | 3 |
>>  | 4 | 5 | 6 |
>> #+end_src
>>
>> exports to the following tex
>> #+begin_src latex
>>  \begin{table*}[htb]
>>  \caption{A wide table with tabulary} \label{tbl:wide}
>>  \begin{center}
>>  \begin{tabulary}{\textwidth}{l|lp{3cm}r|l}
>>   1  &  2  &  3  \\
>>   4  &  5  &  6  \\
>>  \end{tabulary}
>>  \end{center}
>>  \end{table*}
>>
>>
>>  \begin{table}[htb]
>>  \caption{A normal table with tabularx} \label{tbl:wide}
>>  \begin{center}
>>  \begin{tabularx}{\textwidth}{l|lp{3cm}r|l}
>>   1  &  2  &  3  \\
>>   4  &  5  &  6  \\
>>  \end{tabularx}
>>  \end{center}
>>  \end{table}
>>
>>
>>  and now a simple table
>>
>>
>>  \begin{center}
>>  \begin{tabular}{rrr}
>>   1  &  2  &  3  \\
>>   4  &  5  &  6  \\
>>  \end{tabular}
>>  \end{center}
>> #+end_src
>>
>>
>> Thanks -- Eric
>>
>> "Thomas S. Dye" <address@hidden> writes:
>>
>>> Hi Eric,
>>>
>>> A syntax like this, with a width attribute, seems most like Org-mode
>>> to me:
>>>
>>> #+ATTR_LaTeX table* tabularx width=\textwidth align=llXrl
>>>
>>> If that isn't a reasonable possibility, then, yes, the square
>>> brackets
>>> should be changed.  These represent optional arguments in LaTeX.  The
>>> width argument is required by tabularx and tabulary, not optional, so
>>> it looks like an error from a LaTeX point of view.  Changing the
>>> square brackets to curly brackets in this case would have the
>>> advantage of looking a lot like the underlying LaTeX.
>>>
>>> All the best,
>>> Tom
>>>
>>> On Dec 16, 2010, at 2:57 PM, Eric Schulte wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> Thanks for the pointer, how about this revised version of the patch.
>>>> It
>>>> takes the following inputs
>>>>
>>>> #+begin_src org
>>>> #+CAPTION: A wide table with tabulary
>>>> #+LABEL: tbl:wide
>>>> #+ATTR_LaTeX: table* tabulary[\textwidth] align=l|lp{3cm}r|l
>>>> | 1 | 2 | 3 |
>>>> | 4 | 5 | 6 |
>>>>
>>>> #+CAPTION: A normal table with tabularx
>>>> #+LABEL: tbl:wide
>>>> #+ATTR_LaTeX: table tabularx[\textwidth] align=l|lp{3cm}r|l
>>>> | 1 | 2 | 3 |
>>>> | 4 | 5 | 6 |
>>>> #+end_src
>>>>
>>>> and yields the following output
>>>>
>>>> #+begin_src latex
>>>> \begin{table*}[htb]
>>>> \caption{A wide table with tabulary} \label{tbl:wide}
>>>> \begin{center}
>>>> \begin{tabulary}{\textwidth}{l|lp{3cm}r|l}
>>>>  1  &  2  &  3  \\
>>>>  4  &  5  &  6  \\
>>>> \end{tabulary}
>>>> \end{center}
>>>> \end{table*}
>>>>
>>>>
>>>> \begin{table}[htb]
>>>> \caption{A normal table with tabularx} \label{tbl:wide}
>>>> \begin{center}
>>>> \begin{tabularx}{\textwidth}{l|lp{3cm}r|l}
>>>>  1  &  2  &  3  \\
>>>>  4  &  5  &  6  \\
>>>> \end{tabularx}
>>>> \end{center}
>>>> \end{table}
>>>> #+end_src
>>>>
>>>> I'm not sure about the square bracket syntax, maybe curly would be
>>>> preferable.  Definitely open to suggestions.
>>>>
>>>> Should this be applied?  Are there any obvious areas for
>>>> improvement?
>>>>
>>>> Thanks -- Eric
>>>>
>>>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>>>> index a261171..af0a15d 100644
>>>> --- a/lisp/org-latex.el
>>>> +++ b/lisp/org-latex.el
>>>> @@ -1741,7 +1741,7 @@ The conversion is made depending of STRING-
>>>> BEFORE and STRING-AFTER."
>>>>             (org-table-last-column-widths (copy-sequence
>>>>                                            org-table-last-column-
>>>> widths))
>>>>             fnum fields line lines olines gr colgropen line-fmt
>>>> align
>>>> -             caption shortn label attr floatp placement longtblp)
>>>> +             caption shortn label attr floatp placement longtblp
>>>> tblenv)
>>>>        (if org-export-latex-tables-verbatim
>>>>            (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>>>>                                "\\end{verbatim}\n")))
>>>> @@ -1758,6 +1758,16 @@ The conversion is made depending of STRING-
>>>> BEFORE and STRING-AFTER."
>>>>                         'org-label raw-table)
>>>>                  longtblp (and attr (stringp attr)
>>>>                                (string-match "\\<longtable\\>"
>>>> attr))
>>>> +            tblenv (if (and attr (stringp attr)
>>>> +                            (string-match (regexp-quote "table*") attr))
>>>> +                       "table*" "table")
>>>> +            org-export-latex-tabular-environment
>>>> +            (progn
>>>> +              (message "attr:%s" attr)
>>>> +              (if (and attr (stringp attr)
>>>> +                       (string-match "\\(tabular.*\\)\\[\\(.+\\)\\]" 
>>>> attr))
>>>> +                  (list (match-string 1 attr) (match-string 2 attr))
>>>> +                org-export-latex-tabular-environment))
>>>>                  align (and attr (stringp attr)
>>>>                             (string-match "\\<align=\\([^ \t\n\r]+\
>>>> \)" attr)
>>>>                             (match-string 1 attr))
>>>> @@ -1821,7 +1831,8 @@ The conversion is made depending of STRING-
>>>> BEFORE and STRING-AFTER."
>>>>                       (concat
>>>>                        (if longtblp
>>>>                            (concat "\\begin{longtable}{" align "}
>>>> \n")
>>>> -                          (if floatp (format "\\begin{table}%s\n"
>>>> placement)))
>>>> +                          (if floatp
>>>> +                        (format "\\begin{%s}%s\n" tblenv placement)))
>>>>                        (if floatp
>>>>                            (format
>>>>                             "\\caption%s{%s} %s"
>>>> @@ -1832,8 +1843,15 @@ The conversion is made depending of STRING-
>>>> BEFORE and STRING-AFTER."
>>>>                        (if (and org-export-latex-tables-centered
>>>> (not longtblp))
>>>>                            "\\begin{center}\n")
>>>>                        (if (not longtblp)
>>>> -                      (format "\\begin{%s}{%s}\n"
>>>> -                              org-export-latex-tabular-environment align))
>>>> +                      (if (listp org-export-latex-tabular-environment)
>>>> +                          (apply
>>>> +                           #'format
>>>> +                           (append
>>>> +                            (list "\\begin{%s}{%s}{%s}\n")
>>>> +                            org-export-latex-tabular-environment
>>>> +                            (list align)))
>>>> +                        (format "\\begin{%s}{%s}\n"
>>>> +                                org-export-latex-tabular-environment 
>>>> align)))
>>>>                        (orgtbl-to-latex
>>>>                         lines
>>>>                         `(:tstart nil :tend nil
>>>> @@ -1847,12 +1865,14 @@ The conversion is made depending of STRING-
>>>> BEFORE and STRING-AFTER."
>>>>                                             nil)))
>>>>                        (if (not longtblp)
>>>>                        (format "\n\\end{%s}"
>>>> -                              org-export-latex-tabular-environment))
>>>> +                              (if (listp 
>>>> org-export-latex-tabular-environment)
>>>> +                                  (car 
>>>> org-export-latex-tabular-environment)
>>>> +                                org-export-latex-tabular-environment)))
>>>>                        (if longtblp "\n" (if org-export-latex-
>>>> tables-centered
>>>>                                              "\n\\end{center}\n"
>>>> "\n"))
>>>>                        (if longtblp
>>>>                            "\\end{longtable}"
>>>> -                          (if floatp "\\end{table}"))))
>>>> +                          (if floatp (format "\\end{%s}"
>>>> tblenv)))))
>>>>                      "\n\n"))))))))
>>>>
>>>> (defun org-export-latex-convert-table.el-table ()
>>>>
>>>> "Thomas S. Dye" <address@hidden> writes:
>>>>
>>>>> Hi Eric,
>>>>>
>>>>> The syntax for tabularx and tabulary includes a width specification
>>>>> that is a required argument:
>>>>>
>>>>> \begin{tabulary}{<width>}{<align>} ... \end{tabulary}
>>>>> \begin{tabularx}{<width>}{<align>} ... \end{tabularx}
>>>>>
>>>>> This is typically set to something like \linewidth, \colwidth, or
>>>>> \textwidth, but might also take an absolute length like 250pt, 5in,
>>>>> etc.
>>>>>
>>>>> All the best,
>>>>> Tom
>>>>>
>>>>> On Dec 16, 2010, at 4:43 AM, Eric Schulte wrote:
>>>>>
>>>>>> The attached patch implements the behavior described previously,
>>>>>> so
>>>>>> for
>>>>>> example the following org
>>>>>>
>>>>>> #+begin_src org
>>>>>> #+CAPTION: A wide table with tabulary
>>>>>> #+LABEL: tbl:wide
>>>>>> #+ATTR_LaTeX: table* tabulary align=l|lp{3cm}r|l
>>>>>> | 1 | 2 | 3 |
>>>>>> | 4 | 5 | 6 |
>>>>>>
>>>>>> #+CAPTION: A normal table with tabularx
>>>>>> #+LABEL: tbl:wide
>>>>>> #+ATTR_LaTeX: table tabularx align=l|lp{3cm}r|l
>>>>>> | 1 | 2 | 3 |
>>>>>> | 4 | 5 | 6 |
>>>>>> #+end_src
>>>>>>
>>>>>> exports to the following latex
>>>>>>
>>>>>> #+begin_src latex
>>>>>> \begin{table*}[htb]
>>>>>> \caption{A wide table with tabulary} \label{tbl:wide}
>>>>>> \begin{center}
>>>>>> \begin{tabulary}{l|lp{3cm}r|l}
>>>>>> 1  &  2  &  3  \\
>>>>>> 4  &  5  &  6  \\
>>>>>> \end{tabulary}
>>>>>> \end{center}
>>>>>> \end{table*}
>>>>>>
>>>>>>
>>>>>> \begin{table}[htb]
>>>>>> \caption{A normal table with tabularx} \label{tbl:wide}
>>>>>> \begin{center}
>>>>>> \begin{tabularx}{l|lp{3cm}r|l}
>>>>>> 1  &  2  &  3  \\
>>>>>> 4  &  5  &  6  \\
>>>>>> \end{tabularx}
>>>>>> \end{center}
>>>>>> \end{table}
>>>>>> #+end_src
>>>>>>
>>>>>> Does this behavior and patch look reasonable?  If I don't hear by
>>>>>> the
>>>>>> end of the day I will apply this patch, I just wanted to check
>>>>>> first
>>>>>> on
>>>>>> list as the export mechanisms aren't my personal area of
>>>>>> expertise.
>>>>>>
>>>>>> Thanks -- Eric
>>>>>>
>>>>>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>>>>>> index a261171..66541de 100644
>>>>>> --- a/lisp/org-latex.el
>>>>>> +++ b/lisp/org-latex.el
>>>>>> @@ -1741,7 +1741,7 @@ The conversion is made depending of STRING-
>>>>>> BEFORE and STRING-AFTER."
>>>>>>            (org-table-last-column-widths (copy-sequence
>>>>>>                                           org-table-last-column-
>>>>>> widths))
>>>>>>            fnum fields line lines olines gr colgropen line-fmt
>>>>>> align
>>>>>> -             caption shortn label attr floatp placement longtblp)
>>>>>> +             caption shortn label attr floatp placement longtblp
>>>>>> tblenv tblrenv)
>>>>>>       (if org-export-latex-tables-verbatim
>>>>>>           (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>>>>>>                               "\\end{verbatim}\n")))
>>>>>> @@ -1758,6 +1758,15 @@ The conversion is made depending of STRING-
>>>>>> BEFORE and STRING-AFTER."
>>>>>>                        'org-label raw-table)
>>>>>>                 longtblp (and attr (stringp attr)
>>>>>>                               (string-match "\\<longtable\\>"
>>>>>> attr))
>>>>>> +                  tblenv (if (and attr (stringp attr)
>>>>>> +                                  (string-match (regexp-quote "table*") 
>>>>>> attr))
>>>>>> +                             "table*" "table")
>>>>>> +                  org-export-latex-tabular-environment
>>>>>> +                  (if (and attr (stringp attr)
>>>>>> +                           (string-match (regexp-quote "tabularx") 
>>>>>> attr))
>>>>>> +                      "tabularx"
>>>>>> +                    (if (string-match (regexp-quote "tabulary") attr)
>>>>>> +                        "tabulary" 
>>>>>> org-export-latex-tabular-environment))
>>>>>>                 align (and attr (stringp attr)
>>>>>>                            (string-match "\\<align=\\([^ \t\n\r]+\
>>>>>> \)" attr)
>>>>>>                            (match-string 1 attr))
>>>>>> @@ -1821,7 +1830,8 @@ The conversion is made depending of STRING-
>>>>>> BEFORE and STRING-AFTER."
>>>>>>                      (concat
>>>>>>                       (if longtblp
>>>>>>                           (concat "\\begin{longtable}{" align "}
>>>>>> \n")
>>>>>> -                          (if floatp (format "\\begin{table}%s\n"
>>>>>> placement)))
>>>>>> +                          (if floatp
>>>>>> +                              (format "\\begin{%s}%s\n" tblenv 
>>>>>> placement)))
>>>>>>                       (if floatp
>>>>>>                           (format
>>>>>>                            "\\caption%s{%s} %s"
>>>>>> @@ -1852,7 +1862,7 @@ The conversion is made depending of STRING-
>>>>>> BEFORE and STRING-AFTER."
>>>>>>                                             "\n\\end{center}\n"
>>>>>> "\n"))
>>>>>>                       (if longtblp
>>>>>>                           "\\end{longtable}"
>>>>>> -                          (if floatp "\\end{table}"))))
>>>>>> +                          (if floatp (format "\\end{%s}"
>>>>>> tblenv)))))
>>>>>>                     "\n\n"))))))))
>>>>>>
>>>>>> (defun org-export-latex-convert-table.el-table ()
>>>>>>
>>>>>> "Eric Schulte" <address@hidden> writes:
>>>>>>
>>>>>>> Hi Tom,
>>>>>>>
>>>>>>> Thanks for the informative list.  I had no idea LaTeX supported
>>>>>>> so
>>>>>>> many
>>>>>>> table options.  How about I update the patch so that is supports
>>>>>>> the
>>>>>>> following sets of mutually exclusive options...
>>>>>>> - longtable :: wraps the table in a longtable with no table or
>>>>>>> tabular
>>>>>>>             wrappers -- already implemented
>>>>>>> - table* :: replaces =table= wrapper with =table*= wrapper,
>>>>>>> contains an
>>>>>>>          inner tabular wrapper
>>>>>>> - tabular[xy] :: specifies the inner tabular wrapping
>>>>>>> environment,
>>>>>>> only
>>>>>>>               one can be specified
>>>>>>>
>>>>>>> so for example, the following
>>>>>>>
>>>>>>> #+begin_src org
>>>>>>> #+CAPTION: A wide table
>>>>>>> #+LABEL: tbl:wide
>>>>>>> #+ATTR_LaTeX: table* tabulary align=l|lp{3cm}r|l
>>>>>>> | ... | ... |
>>>>>>> | ... | ... |
>>>>>>> #+end_src
>>>>>>>
>>>>>>> results in the following
>>>>>>>
>>>>>>> #+begin_src latex
>>>>>>> \begin{table*}[htb]
>>>>>>> \caption{A wide table} \label{tbl:wide}
>>>>>>> \begin{center}
>>>>>>> \begin{tabulary}{l|lp{3cm}r|l}
>>>>>>> 1  &  2  &  3  \\
>>>>>>> 4  &  5  &  6  \\
>>>>>>> \end{tabulary}
>>>>>>> \end{center}
>>>>>>> \end{table*}
>>>>>>> #+end_src
>>>>>>>
>>>>>>> Then the next question would be how to insert a =figure*= instead
>>>>>>> of a
>>>>>>> simple =figure= environment.
>>>>>>>
>>>>>>> Thanks -- Eric
>>>>>>>
>>>>>>> Thomas S. Dye <address@hidden> writes:
>>>>>>>
>>>>>>>> Hi Eric,
>>>>>>>>
>>>>>>>> It would be great to have a more general solution.  Tables are
>>>>>>>> hard to
>>>>>>>> typeset, so it might take a while to come up with a good
>>>>>>>> specification.  Here is what I know about the LaTeX side of
>>>>>>>> things.
>>>>>>>>
>>>>>>>> ** LaTeX destinations for an Org-mode table
>>>>>>>> *** Environments for typesetting a table
>>>>>>>>  - table placed in the output where it occurs in the input
>>>>>>>>  - all of these environments can be used on their own
>>>>>>>> **** tabular
>>>>>>>>   standard LaTeX environment, doesn't break across pages, no
>>>>>>>> caption
>>>>>>>> **** tabularx
>>>>>>>>   extended environment that can automatically calculate column
>>>>>>>>   widths and wrap text within table cells, doesn't break across
>>>>>>>>   pages, no caption
>>>>>>>> **** tabulary
>>>>>>>>   like tabularx, but tries harder to come up with optimal column
>>>>>>>> widths
>>>>>>>> **** supertabular
>>>>>>>>   extended tabular environment that breaks across pages,
>>>>>>>> includes
>>>>>>>>   caption
>>>>>>>> **** supertabular*
>>>>>>>>   like supertabular, but for wide tables in a multicolumn page
>>>>>>>>   layout
>>>>>>>> **** mpsupertabular
>>>>>>>>   like supertabular, but also handles footnotes within the table
>>>>>>>> **** mpsupertabular*
>>>>>>>>   like mpsupertabular, but for multicolumn page layouts
>>>>>>>> **** longtable
>>>>>>>>   extended tabular environment that breaks across pages and
>>>>>>>>   includes a caption, but can't be used in a multicolumn page
>>>>>>>>   layout
>>>>>>>> *** Environment for floating a table and adding a caption
>>>>>>>>  floats a table typeset by some other environment to a place in
>>>>>>>> the
>>>>>>>>  output that LaTeX determines appropriate, probably not where it
>>>>>>>>  occurs in the input
>>>>>>>> **** =table=, single column document
>>>>>>>>   typically wraps a =tabular=, =tabularx=, or =tabulary=
>>>>>>>> environment
>>>>>>>> **** =table*=, multi-column document
>>>>>>>>   typically wraps a =tabular=, =tabularx=, or =tabulary=
>>>>>>>> environment
>>>>>>>> *** "Typical" uses
>>>>>>>>  In our report production work we regularly use seven setups:
>>>>>>>>  - table or table* wrapped around tabularx or tabular
>>>>>>>>  - longtable
>>>>>>>>  - tabular or tabularx on their own
>>>>>>>>
>>>>>>>> hth,
>>>>>>>> Tom
>>>>>>>> On Dec 15, 2010, at 11:33 AM, Eric Schulte wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> The attached patch allows the use of table* latex tables from
>>>>>>>>> within
>>>>>>>>> Org
>>>>>>>>> mode documents using the attr_latex lines, for example
>>>>>>>>>
>>>>>>>>> #+CAPTION: A wide table
>>>>>>>>> #+LABEL: tbl:wide
>>>>>>>>> #+ATTR_LaTeX: table* align=l|lp{3cm}r|l
>>>>>>>>> | ... | ... |
>>>>>>>>> | ... | ... |
>>>>>>>>>
>>>>>>>>> Should this be added, or should we put together a more general
>>>>>>>>> solution
>>>>>>>>> for different types of table environments?  Currently only
>>>>>>>>> longtable
>>>>>>>>> is
>>>>>>>>> supported.  Also, is there already a way to do this that I have
>>>>>>>>> missed?
>>>>>>>>>
>>>>>>>>> Thanks -- Eric
>>>>>>>>>
>>>>>>>>> diff --git a/lisp/org-latex.el b/lisp/org-latex.el
>>>>>>>>> index a261171..b7f48d3 100644
>>>>>>>>> --- a/lisp/org-latex.el
>>>>>>>>> +++ b/lisp/org-latex.el
>>>>>>>>> @@ -1741,7 +1741,7 @@ The conversion is made depending of
>>>>>>>>> STRING-
>>>>>>>>> BEFORE and STRING-AFTER."
>>>>>>>>>           (org-table-last-column-widths (copy-sequence
>>>>>>>>>                                          org-table-last-column-
>>>>>>>>> widths))
>>>>>>>>>           fnum fields line lines olines gr colgropen line-fmt
>>>>>>>>> align
>>>>>>>>> -             caption shortn label attr floatp placement
>>>>>>>>> longtblp)
>>>>>>>>> +             caption shortn label attr floatp placement
>>>>>>>>> longtblp
>>>>>>>>> tblenv)
>>>>>>>>>      (if org-export-latex-tables-verbatim
>>>>>>>>>          (let* ((tbl (concat "\\begin{verbatim}\n" raw-table
>>>>>>>>>                              "\\end{verbatim}\n")))
>>>>>>>>> @@ -1758,6 +1758,9 @@ The conversion is made depending of
>>>>>>>>> STRING-
>>>>>>>>> BEFORE and STRING-AFTER."
>>>>>>>>>                       'org-label raw-table)
>>>>>>>>>                longtblp (and attr (stringp attr)
>>>>>>>>>                              (string-match "\\<longtable\\>"
>>>>>>>>> attr))
>>>>>>>>> +               tblenv (if (and attr (stringp attr)
>>>>>>>>> +                               (string-match (regexp-quote "table*") 
>>>>>>>>> attr))
>>>>>>>>> +                          "table*" "table")
>>>>>>>>>                align (and attr (stringp attr)
>>>>>>>>>                           (string-match "\\<align=\\([^
>>>>>>>>> \t\n\r]
>>>>>>>>> +\
>>>>>>>>> \)" attr)
>>>>>>>>>                           (match-string 1 attr))
>>>>>>>>> @@ -1821,7 +1824,8 @@ The conversion is made depending of
>>>>>>>>> STRING-
>>>>>>>>> BEFORE and STRING-AFTER."
>>>>>>>>>                     (concat
>>>>>>>>>                      (if longtblp
>>>>>>>>>                          (concat "\\begin{longtable}{" align "}
>>>>>>>>> \n")
>>>>>>>>> -                          (if floatp (format "\\begin{table}%s
>>>>>>>>> \n"
>>>>>>>>> placement)))
>>>>>>>>> +                          (if floatp
>>>>>>>>> +                           (format "\\begin{%s}%s\n" tblenv 
>>>>>>>>> placement)))
>>>>>>>>>                      (if floatp
>>>>>>>>>                          (format
>>>>>>>>>                           "\\caption%s{%s} %s"
>>>>>>>>> @@ -1852,7 +1856,7 @@ The conversion is made depending of
>>>>>>>>> STRING-
>>>>>>>>> BEFORE and STRING-AFTER."
>>>>>>>>>                                            "\n\\end{center}\n"
>>>>>>>>> "\n"))
>>>>>>>>>                      (if longtblp
>>>>>>>>>                          "\\end{longtable}"
>>>>>>>>> -                          (if floatp "\\end{table}"))))
>>>>>>>>> +                          (if floatp (format "\\end{%s}"
>>>>>>>>> tblenv)))))
>>>>>>>>>                    "\n\n"))))))))
>>>>>>>>>
>>>>>>>>> (defun org-export-latex-convert-table.el-table ()
>>>>>>>>> _______________________________________________
>>>>>>>>> Emacs-orgmode mailing list
>>>>>>>>> Please use `Reply All' to send replies to the list.
>>>>>>>>> address@hidden
>>>>>>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode