[Emacs-diffs] Changes to emacs/configure.in,v

[Dan Nicolaescu]

CVSROOT:        /cvsroot/emacs
Module name:    emacs
Changes by:     Dan Nicolaescu <dann>   08/06/26 04:24:54

Index: configure.in
===================================================================
RCS file: /cvsroot/emacs/emacs/configure.in,v
retrieving revision 1.534
retrieving revision 1.535
diff -u -b -r1.534 -r1.535
--- configure.in        25 Jun 2008 15:46:23 -0000      1.534
+++ configure.in        26 Jun 2008 04:24:28 -0000      1.535
@@ -265,9 +265,8 @@
 ### based on the machine portion of the configuration name, and an s-
 ### file based on the operating system portion.  However, it turns out
 ### that each m/*.h file is pretty manufacturer-specific - for
-### example hp9000s300.h is a 68000 machine;
-### mips.h, pmax.h are all MIPS
-### machines.  So we basically have to have a special case for each
+### example mips.h is MIPS
+### So we basically have to have a special case for each
 ### configuration name.
 ###
 ### As far as handling version numbers on operating systems is
@@ -322,12 +321,6 @@
     case "${canonical}" in
       alpha*-*-netbsd*)        machine=alpha ;;
       i[3456]86-*-netbsd*) machine=intel386 ;;
-      m68k-*-netbsd*)
-                       # This is somewhat bogus.
-                       machine=hp9000s300 ;;
-      mips-*-netbsd*)  machine=pmax ;;
-      mipsel-*-netbsd*)        machine=pmax ;;
-      mipseb-*-netbsd*)        machine=pmax ;;
       powerpc-*-netbsd*) machine=macppc ;;
       sparc*-*-netbsd*)        machine=sparc ;;
       vax-*-netbsd*)   machine=vax ;;
@@ -343,9 +336,7 @@
     case "${canonical}" in
       alpha*-*-openbsd*)       machine=alpha ;;
       arm-*-openbsd*)          machine=arm ;;
-      hppa-*-openbsd*)         machine=hp9000s300 ;;
       i386-*-openbsd*)         machine=intel386 ;;
-      m68k-*-openbsd*)         machine=hp9000s300 ;;
       powerpc-*-openbsd*)      machine=macppc ;;
       sparc*-*-openbsd*)       machine=sparc ;;
       vax-*-openbsd*)          machine=vax ;;
@@ -362,23 +353,6 @@
     esac
   ;;
 
-  ## BSDI ports
-  *-*-bsdi* )
-    opsys=bsdi
-    case "${canonical}" in
-      i[345]86-*-bsdi*) machine=intel386 ;;
-      sparc-*-bsdi*)  machine=sparc ;;
-      powerpc-*-bsdi*)  machine=macppc ;;
-    esac
-    case "${canonical}" in
-      *-*-bsd386* | *-*-bsdi1* )       opsys=bsd386 ;;
-      *-*-bsdi2.0* )           opsys=bsdos2 ;;
-      *-*-bsdi2* )             opsys=bsdos2-1 ;;
-      *-*-bsdi3* )             opsys=bsdos3 ;;
-      *-*-bsdi[45]* )          opsys=bsdos4 ;;
-    esac
-  ;;
-
   alpha*-*-linux-gnu* )
     machine=alpha opsys=gnu-linux
   ;;
@@ -405,56 +379,10 @@
     fi
   ;;
 
-  ## Cubix QBx/386
-  i[3456]86-cubix-sysv* )
-    machine=intel386 opsys=usg5-3
-  ;;
-
-  mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* )
-    machine=pmax opsys=bsd4-2
-  ;;
-  mips-dec-ultrix4.[12]* | mips-dec-bsd* )
-    machine=pmax opsys=bsd4-3
-  ;;
-  mips-dec-ultrix* )
-    machine=pmax opsys=ultrix4-3
-  ;;
-  ## HP 9000 series 200 or 300
-  m68*-hp-bsd* )
-    machine=hp9000s300 opsys=bsd4-3
-  ;;
-  ## HP/UX 7, 8, 9, and 10 are supported on these machines.
-  m68*-hp-hpux* )
-    case "`uname -r`" in
-      ## Someone's system reports A.B8.05 for this.
-      ## I wonder what other possibilities there are.
-      *.B8.* ) machine=hp9000s300 opsys=hpux8 ;;
-      *.08.* ) machine=hp9000s300 opsys=hpux8 ;;
-      *.09.* ) machine=hp9000s300 opsys=hpux9 ;;
-      *.1[0-9].* ) machine=hp9000s300 opsys=hpux9shr ;;
-      *) machine=hp9000s300 opsys=hpux ;;
-    esac
-  ;;
-
   ## HP 9000 series 700 and 800, running HP/UX
-  hppa*-hp-hpux7* )
-    machine=hp800 opsys=hpux
-  ;;
-  hppa*-hp-hpux8* )
-    machine=hp800 opsys=hpux8
-  ;;
-  hppa*-hp-hpux9shr* )
-    machine=hp800 opsys=hpux9shr
-  ;;
-  hppa*-hp-hpux9* )
-    machine=hp800 opsys=hpux9
-  ;;
   hppa*-hp-hpux10.2* )
     machine=hp800 opsys=hpux10-20
   ;;
-  hppa*-hp-hpux10* )
-    machine=hp800 opsys=hpux10
-  ;;
   hppa*-hp-hpux1[1-9]* )
     machine=hp800 opsys=hpux11
     CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
@@ -464,41 +392,13 @@
     machine=hp800 opsys=gnu-linux
   ;;
 
-  ## HP 9000 series 700 and 800, running HP/UX
-  hppa*-hp-hpux* )
-    ## Cross-compilation?  Nah!
-    case "`uname -r`" in
-      ## Someone's system reports A.B8.05 for this.
-      ## I wonder what other possibilities there are.
-      *.B8.* ) machine=hp800 opsys=hpux8 ;;
-      *.08.* ) machine=hp800 opsys=hpux8 ;;
-      *.09.* ) machine=hp800 opsys=hpux9 ;;
-      *) machine=hp800 opsys=hpux10 ;;
-    esac
-  ;;
-  hppa*-*-nextstep* )
-    machine=hp800 opsys=nextstep
-  ;;
-
   ## IBM machines
-  i370-ibm-aix*)
-    machine=ibm370aix opsys=usg5-3
-  ;;
   s390-*-linux-gnu* )
     machine=ibms390 opsys=gnu-linux
   ;;
   s390x-*-linux-gnu* )
     machine=ibms390x opsys=gnu-linux
   ;;
-  rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1*  )
-    machine=ibmrs6000 opsys=aix3-1
-  ;;
-  rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 )
-    machine=ibmrs6000 opsys=aix3-2-5
-  ;;
-  rs6000-ibm-aix4.1* | powerpc-ibm-aix4.1*  )
-    machine=ibmrs6000 opsys=aix4-1
-  ;;
   rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
@@ -511,65 +411,12 @@
   rs6000-ibm-aix5* | powerpc-ibm-aix6*  )
     machine=ibmrs6000 opsys=aix4-2
   ;;
-  rs6000-ibm-aix4.0* | powerpc-ibm-aix4.0*  )
-    machine=ibmrs6000 opsys=aix4
-  ;;
-  rs6000-ibm-aix4* | powerpc-ibm-aix4*  )
-    machine=ibmrs6000 opsys=aix4-1
-  ;;
-  rs6000-ibm-aix* | powerpc-ibm-aix* )
-    machine=ibmrs6000 opsys=aix3-2
-  ;;
-
-  ## Prime EXL
-  i[3456]86-prime-sysv* )
-    machine=i386 opsys=usg5-3
-  ;;
-
-  ## ncr machine running svr4.3.
-  i[3456]86-ncr-sysv4.3 )
-    machine=ncr386 opsys=usg5-4-3
-  ;;
-
-  ## Unspecified sysv on an ncr machine defaults to svr4.2.
-  ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.)
-  i[3456]86-ncr-sysv* )
-    machine=ncr386 opsys=usg5-4-2
-  ;;
 
   ## Macintosh PowerPC
   powerpc*-*-linux-gnu* )
     machine=macppc opsys=gnu-linux
   ;;
 
-  ## Workstations sold by MIPS
-  ## This is not necessarily all workstations using the MIPS processor -
-  ## Irises are produced by SGI, and DECstations by DEC.
-
-  mips-mips-bsd* )
-    machine=mips opsys=bsd4-3
-  ;;
-  mips-mips-* )
-    machine=mips opsys=usg5-2-2
-  ;;
-
-  ## NeXT
-  m68*-next-* | m68k-*-nextstep* )
-    machine=m68k opsys=nextstep
-  ;;
-
-  ## NEC EWS4800
-  mips-nec-sysv4*)
-  machine=ews4800 opsys=ux4800
-  ;;
-
-  ## Siemens Nixdorf
-  mips-siemens-sysv* | mips-sni-sysv*)
-    machine=mips-siemens opsys=usg5-4
-    NON_GNU_CC=/usr/ccs/bin/cc
-    NON_GNU_CPP=/usr/ccs/lib/cpp
-  ;;
-
   ## Silicon Graphics machines
   ## Iris 4D
   mips-sgi-irix6.5 )
@@ -592,7 +439,6 @@
     case "${canonical}" in
       i[3456]86-*-* )     machine=intel386 ;;
       amd64-*-*|x86_64-*-*)    machine=amdx86-64 ;;
-      powerpcle* )      machine=powerpcle ;;
       powerpc* | rs6000* )  machine=ibmrs6000 ;;
       sparc* )         machine=sparc ;;
       * )              unported=yes ;;
@@ -622,7 +468,6 @@
                emacs_check_sunpro_c=yes
                NON_GNU_CPP=/usr/ccs/lib/cpp
                ;;
-      *                          ) opsys=bsd4-2   ;;
     esac
     ## Watch out for a compiler that we know will not work.
     case "${canonical}" in
@@ -636,24 +481,11 @@
       *) ;;
     esac
   ;;
-  sparc-*-nextstep* )
-    machine=sparc opsys=nextstep
-  ;;
-
-  ## Tandem Integrity S2
-  mips-tandem-sysv* )
-    machine=tandem-s2 opsys=usg5-3
-  ;;
 
   ## Vaxen.
   vax-dec-* )
     machine=vax
     case "${canonical}" in
-      *-bsd4.1* )                                      opsys=bsd4-1 ;;
-      *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* )     opsys=bsd4-2 ;;
-      *-bsd4.3* | *-ultrix* )                          opsys=bsd4-3 ;;
-      *-sysv[01]* | *-sysvr[01]* )                     opsys=usg5-0 ;;
-      *-sysv2* | *-sysvr2* )                           opsys=usg5-2 ;;
       *-vms* )                                                 opsys=vms ;;
       * )                                              unported=yes
     esac
@@ -676,8 +508,6 @@
       *-sysv4.2uw* )           opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
       *-sysv5uw* )             opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
       *-sysv5OpenUNIX* )       opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
-      *-386bsd* )              opsys=386bsd ;;
-      *-nextstep* )             opsys=nextstep ;;
       ## Otherwise, we'll fall through to the generic opsys code at the bottom.
     esac
   ;;
@@ -692,13 +522,6 @@
     machine=mips opsys=gnu-linux
   ;;
 
-  ## UXP/DS
-  sparc-fujitsu-sysv4* )
-    machine=sparc opsys=uxpds
-    NON_GNU_CPP=/usr/ccs/lib/cpp
-    RANLIB="ar -ts"
-  ;;
-
   ## AMD x86-64 Linux-based GNU system
   x86_64-*-linux-gnu* )
     machine=amdx86-64 opsys=gnu-linux
@@ -723,13 +546,6 @@
 if test x"${opsys}" = x; then
   case "${canonical}" in
     *-gnu* )                           opsys=gnu ;;
-    *-bsd4.[01] )                      opsys=bsd4-1 ;;
-    *-bsd4.2 )                         opsys=bsd4-2 ;;
-    *-bsd4.3 )                         opsys=bsd4-3 ;;
-    *-sysv0 | *-sysvr0 )               opsys=usg5-0 ;;
-    *-sysv2 | *-sysvr2 )               opsys=usg5-2 ;;
-    *-sysv2.2 | *-sysvr2.2 )           opsys=usg5-2-2 ;;
-    *-sysv3* | *-sysvr3* )             opsys=usg5-3 ;;
     *-sysv4.2uw* )                     opsys=unixware ;;
     *-sysv5uw* )                       opsys=unixware ;;
     *-sysv5OpenUNIX* )                 opsys=unixware ;;
@@ -752,30 +568,6 @@
   esac
 fi
 
-### Tests for sytems that we beleive are obsolete and should be desupported.
-
-case "${machine}" in
-     pmax | hp9000s300 | ibm370aix | ncr386 | ews4800 | mips-siemens | 
powerpcle | tandem-s2 )
-         echo "The system that you are configuring on: ${canonical} is 
considered to be obsolete"
-         echo "and it is planned to be desupported in the next version of 
Emacs"
-         echo "Please email address@hidden as soon as possible if this system 
is still in use."
-         echo "The code is still functional, but you need to edit the 
'configure' script and remove the"
-         echo "exit 33 line.  After that you can run configure again and 
'complete' the build."
-         exit 33
-         ;;
-esac
-
-case "${opsys}" in
-     bsd386 | bsdos2-1 |  bsdos2 | bsdos3 | bsdos4 | bsd4-1 | bsd4-2 | bsd4-3 
| usg5-0 | usg5-2-2 | usg5-2 | usg5-3 | ultrix4-3 | 386bsd | hpux | hpux8 | 
hpux9 | hpux9shr | hpux10 | aix3-1 | aix3-2-5 | aix3-2 | aix4-1 | nextstep | 
ux4800 | uxpds | uxpv )
-         echo "The system that you are configuring on: ${canonical} is 
considered to be obsolete"
-         echo "and it is planned to be desupported in the next version of 
Emacs"
-         echo "Please email address@hidden as soon as possible if this system 
is still in use."
-         echo "The code is still functional, but you need to edit the 
'configure' script and remove the"
-         echo "'exit 44' line.  After that you can run 'configure' again and 
complete the build."
-         exit 44
-         ;;
-esac
-
 ]
 dnl quotation ends
 
@@ -1475,9 +1267,6 @@
   yes ) HAVE_MENUS=yes ;;
 esac
 
-### Compute the unexec source name from the object name.
-UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`"
-
 # Do the opsystem or machine files prohibit the use of the GNU malloc?
 # Assume not, until told otherwise.
 GNU_MALLOC=yes