[Emacs-diffs] Changes to mark.texi

[Glenn Morris]

CVSROOT:        /sources/emacs
Module name:    emacs
Changes by:     Glenn Morris <gm>       07/09/06 04:38:21

Index: mark.texi
===================================================================
RCS file: mark.texi
diff -N mark.texi
--- mark.texi   21 Jan 2007 04:41:10 -0000      1.39
+++ /dev/null   1 Jan 1970 00:00:00 -0000
@@ -1,452 +0,0 @@
address@hidden This is part of the Emacs manual.
address@hidden Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 
2002,
address@hidden   2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
address@hidden See file emacs.texi for copying conditions.
address@hidden Mark, Killing, Help, Top
address@hidden The Mark and the Region
address@hidden mark
address@hidden setting a mark
address@hidden region
-
-  Many Emacs commands operate on an arbitrary contiguous part of the
-current buffer.  To specify the text for such a command to operate on,
-you set @dfn{the mark} at one end of it, and move point to the other
-end.  The text between point and the mark is called @dfn{the region}.
-Emacs highlights the region whenever there is one, if you enable
-Transient Mark mode (@pxref{Transient Mark}).
-
-  Certain Emacs commands set the mark; other editing commands do not
-affect it, so the mark remains where you set it last.  Each Emacs
-buffer has its own mark, and setting the mark in one buffer has no
-effect on other buffers' marks.  When you return to a buffer that was
-current earlier, its mark is at the same place as before.
-
-  The ends of the region are always point and the mark.  It doesn't
-matter which of them was put in its current place first, or which one
-comes earlier in the text---the region starts from point or the mark
-(whichever comes first), and ends at point or the mark (whichever
-comes last).  Every time you move point, or set the mark in a new
-place, the region changes.
-
-  Many commands that insert text, such as @kbd{C-y} (@code{yank}) and
address@hidden insert-buffer}, position point and the mark at opposite ends
-of the inserted text, so that the region consists of the text just
-inserted.
-
-  Aside from delimiting the region, the mark is also useful for
-remembering a spot that you may want to go back to.  To make this
-feature more useful, each buffer remembers 16 previous locations of the
-mark in the @dfn{mark ring}.
-
address@hidden
-* Setting Mark::       Commands to set the mark.
-* Transient Mark::     How to make Emacs highlight the region--
-                         when there is one.
-* Momentary Mark::      Enabling Transient Mark mode momentarily.
-* Using Region::       Summary of ways to operate on contents of the region.
-* Marking Objects::    Commands to put region around textual units.
-* Mark Ring::          Previous mark positions saved so you can go back there.
-* Global Mark Ring::    Previous mark positions in various buffers.
address@hidden menu
-
address@hidden Setting Mark
address@hidden Setting the Mark
-
-  Here are some commands for setting the mark:
-
address@hidden @kbd
address@hidden address@hidden
-Set the mark where point is (@code{set-mark-command}).
address@hidden C-@@
-The same.
address@hidden C-x C-x
-Interchange mark and point (@code{exchange-point-and-mark}).
address@hidden Drag-Mouse-1
-Set point and the mark around the text you drag across.
address@hidden Mouse-3
-Set the mark where point is, then move point to where you click
-(@code{mouse-save-then-kill}).
address@hidden table
-
-  For example, suppose you wish to convert part of the buffer to
-upper case, using the @kbd{C-x C-u} (@code{upcase-region}) command,
-which operates on the text in the region.  You can first go to the
-beginning of the text to be capitalized, type @address@hidden to put
-the mark there, move to the end, and then type @kbd{C-x C-u}.  Or, you
-can set the mark at the end of the text, move to the beginning, and then
-type @kbd{C-x C-u}.
-
address@hidden C-SPC
address@hidden set-mark-command
-  The most common way to set the mark is with the @address@hidden command
-(@code{set-mark-command}).  This sets the mark where point is.  Then you
-can move point away, leaving the mark behind.
-
-  There are two ways to set the mark with the mouse.  You can drag mouse
-button one across a range of text; that puts point where you release the
-mouse button, and sets the mark at the other end of that range.  Or you
-can click mouse button three, which sets the mark at point (like
address@hidden@key{SPC}}) and then moves point where you clicked (like
address@hidden).
-
-  Using the mouse to mark a region copies the region into the kill
-ring in addition to setting the mark; that gives behavior consistent
-with other window-driven applications.  If you don't want to modify
-the kill ring, you must use keyboard commands to set the mark.
address@hidden Commands}.
-
address@hidden C-x C-x
address@hidden exchange-point-and-mark
-  When Emacs was developed, terminals had only one cursor, so Emacs
-does not show where the mark is located--you have to remember.  If you
-enable Transient Mark mode (see below), then the region is highlighted
-when it is active; you can tell mark is at the other end of the
-highlighted region.  But this only applies when the mark is active.
-
-  The usual solution to this problem is to set the mark and then use
-it soon, before you forget where it is.  Alternatively, you can see
-where the mark is with the command @kbd{C-x C-x}
-(@code{exchange-point-and-mark}) which puts the mark where point was
-and point where the mark was.  The extent of the region is unchanged,
-but the cursor and point are now at the previous position of the mark.
-In Transient Mark mode, this command also reactivates the mark.
-
-  @kbd{C-x C-x} is also useful when you are satisfied with the position
-of point but want to move the other end of the region (where the mark
-is); do @kbd{C-x C-x} to put point at that end of the region, and then
-move it.  Using @kbd{C-x C-x} a second time, if necessary, puts the mark at
-the new position with point back at its original position.
-
-  For more facilities that allow you to go to previously set marks, see
address@hidden Ring}.
-
address@hidden C-@@
-  There is no such character as @address@hidden in @acronym{ASCII};
-when you type @key{SPC} while holding down @key{CTRL} on a text
-terminal, what you get is the character @kbd{C-@@}.  This key is also
-bound to @code{set-mark-command}--so unless you are unlucky enough to
-have a text terminal where typing @address@hidden does not produce
address@hidden@@}, you might as well think of this character as
address@hidden@key{SPC}}.
-
address@hidden Transient Mark
address@hidden Transient Mark Mode
address@hidden mode, Transient Mark
address@hidden Transient Mark mode
address@hidden highlighting region
address@hidden region highlighting
-
-  On a terminal that supports colors, Emacs has the ability to
-highlight the current region.  But normally it does not.  Why not?
-
-  In the normal mode of use, every command that sets the mark also
-activates it, and nothing ever deactivates it.  Thus, once you have
-set the mark in a buffer, there is @emph{always} a region in that
-buffer.  Highlighting the region all the time would be a nuisance.  So
-normally Emacs highlights the region only immediately after you have
-selected one with the mouse.
-
-  If you want region highlighting, you can use Transient Mark mode.
-This is a more rigid mode of operation in which the region ``lasts''
-only until you use it; operating on the region text deactivates the
-mark, so there is no region any more.  Therefore, you must explicitly
-set up a region for each command that uses one.
-
-  When Transient Mark mode is enabled, Emacs highlights the region,
-whenever there is a region.  In Transient Mark mode, most of the time
-there is no region; therefore, highlighting the region when it exists
-is useful and not annoying.
-
address@hidden transient-mark-mode
-  To enable Transient Mark mode, type @kbd{M-x transient-mark-mode}.
-This command toggles the mode; you can use the same command to turn
-the mode off again.
-
-  Here are the details of Transient Mark mode:
-
address@hidden @bullet
address@hidden
-To set the mark, type @address@hidden (@code{set-mark-command}).
-This makes the mark active and thus begins highlighting of the region.
-As you move point, you will see the highlighted region grow and
-shrink.
-
address@hidden
-The mouse commands for specifying the mark also make it active.  So do
-keyboard commands whose purpose is to specify a region, including
address@hidden@@}, @kbd{C-M-@@}, @kbd{M-h}, @kbd{C-M-h}, @kbd{C-x C-p}, and
address@hidden h}.
-
address@hidden
-You can tell that the mark is active because the region is highlighted.
-
address@hidden
-When the mark is active, you can execute commands that operate on the
-region, such as killing, indenting, or writing to a file.
-
address@hidden
-Any change to the buffer, such as inserting or deleting a character,
-deactivates the mark.  This means any subsequent command that operates
-on a region will get an error and refuse to operate.  You can make the
-region active again by typing @kbd{C-x C-x}.
-
address@hidden
-If Delete Selection mode is also enabled, some commands delete the
-region when used while the mark is active.  @xref{Mouse Commands}.
-
address@hidden
-Quitting with @kbd{C-g} deactivates the mark.
-
address@hidden
-Commands like @kbd{M->} and @kbd{C-s}, that ``leave the mark behind'' in
-addition to some other primary purpose, do not activate the new mark.
-You can activate the new region by executing @kbd{C-x C-x}
-(@code{exchange-point-and-mark}).
-
address@hidden
-Commands that normally set the mark before moving long distances (like
address@hidden<} and @kbd{C-s}) do not alter the mark in Transient Mark mode
-when the mark is active.
-
address@hidden
-Some commands operate on the region if a region is active.  For
-instance, @kbd{C-x u} in Transient Mark mode operates on the region,
-when there is a region.  (Outside Transient Mark mode, you must type
address@hidden C-x u} if you want it to operate on the region.)
address@hidden  Other commands that act this way are identified in their
-own documentation.
address@hidden itemize
-
-  The highlighting of the region uses the @code{region} face; you can
-customize the appearance of the highlighted region by changing this
-face.  @xref{Face Customization}.
-
address@hidden highlight-nonselected-windows
-  When multiple windows show the same buffer, they can have different
-regions, because they can have different values of point (though they
-all share one common mark position).  Ordinarily, only the selected
-window highlights its region (@pxref{Windows}).  However, if the
-variable @code{highlight-nonselected-windows} is address@hidden, then
-each window highlights its own region (provided that Transient Mark mode
-is enabled and the mark in the window's buffer is active).
-
address@hidden mark-even-if-inactive
-  If the variable @code{mark-even-if-inactive} is address@hidden in
-Transient Mark mode, then commands can use the mark and the region
-even when it is inactive.  Region highlighting appears and disappears
-just as it normally does in Transient Mark mode, but the mark doesn't
-really go away when the highlighting disappears, so you can still use
-region commands.
-
address@hidden Zmacs mode
-  Transient Mark mode is also sometimes known as ``Zmacs mode''
-because the Zmacs editor on the MIT Lisp Machine handled the mark in a
-similar way.
-
address@hidden Momentary Mark
address@hidden Using Transient Mark Mode Momentarily
-
-  If you don't like Transient Mark mode in general, you might still
-want to use it once in a while.  To do this, type @address@hidden
address@hidden or @kbd{C-u C-x C-x}.  These commands set or activate the
-mark, and enable Transient Mark mode only until the mark is
-deactivated.
-
address@hidden @kbd
address@hidden address@hidden address@hidden
address@hidden address@hidden address@hidden
-Set the mark at point (like plain @address@hidden), and enable
-Transient Mark mode just once until the mark is deactivated.  (This is
-not really a separate command; you are using the @address@hidden
-command twice.)
-
address@hidden C-u C-x C-x
address@hidden C-u C-x C-x
-Activate the mark without changing it; enable Transient Mark mode just
-once, until the mark is deactivated.  (This is the @kbd{C-x C-x}
-command, @code{exchange-point-and-mark}, with a prefix argument.)
address@hidden table
-
-  One of the secondary features of Transient Mark mode is that certain
-commands operate only on the region, when there is an active region.
-If you don't use Transient Mark mode, the region once set never
-becomes inactive, so there is no way for these commands to make such a
-distinction.  Enabling Transient Mark mode momentarily gives you a way
-to use these commands on the region.
-
-  Momentary use of Transient Mark mode is also a way to highlight the
-region for the time being.
-
address@hidden Using Region
address@hidden Operating on the Region
-
address@hidden operations on a marked region
-  Once you have a region and the mark is active, here are some of the
-ways you can operate on the region:
-
address@hidden @bullet
address@hidden
-Kill it with @kbd{C-w} (@pxref{Killing}).
address@hidden
-Save it in a register with @kbd{C-x r s} (@pxref{Registers}).
address@hidden
-Save it in a buffer or a file (@pxref{Accumulating Text}).
address@hidden
-Convert case with @kbd{C-x C-l} or @kbd{C-x C-u} (@pxref{Case}).
address@hidden
-Indent it with @kbd{C-x @key{TAB}} or @kbd{C-M-\} (@pxref{Indentation}).
address@hidden
-Fill it as text with @kbd{M-x fill-region} (@pxref{Filling}).
address@hidden
-Print hardcopy with @kbd{M-x print-region} (@pxref{Printing}).
address@hidden
-Evaluate it as Lisp code with @kbd{M-x eval-region} (@pxref{Lisp Eval}).
address@hidden
-Undo changes within it using @kbd{C-u C-x u} (@pxref{Undo}).
address@hidden itemize
-
-  Most commands that operate on the text in the region have the word
address@hidden in their names.
-
address@hidden Marking Objects
address@hidden Commands to Mark Textual Objects
-
address@hidden marking sections of text
-  Here are the commands for placing point and the mark around a textual
-object such as a word, list, paragraph or page.
-
address@hidden @kbd
address@hidden M-@@
-Set mark after end of next word (@code{mark-word}).  This command and
-the following one do not move point.
address@hidden C-M-@@
-Set mark after end of following balanced expression (@code{mark-sexp}).
address@hidden M-h
-Put region around current paragraph (@code{mark-paragraph}).
address@hidden C-M-h
-Put region around current defun (@code{mark-defun}).
address@hidden C-x h
-Put region around the entire buffer (@code{mark-whole-buffer}).
address@hidden C-x C-p
-Put region around current page (@code{mark-page}).
address@hidden table
-
address@hidden@@} (@code{mark-word}) puts the mark at the end of the next
-word, while @kbd{C-M-@@} (@code{mark-sexp}) puts it at the end of the
-next balanced expression (@pxref{Expressions}).  These commands handle
-arguments just like @kbd{M-f} and @kbd{C-M-f}.  Repeating these
-commands extends the region.  For example, you can type either
address@hidden 2 M-@@} or @kbd{M-@@ M-@@} to mark the next two words.  These
-commands also extend the region in Transient Mark mode, regardless of
-the last command.
-
address@hidden C-x h
address@hidden mark-whole-buffer
-   Other commands set both point and mark, to delimit an object in the
-buffer.  For example, @kbd{M-h} (@code{mark-paragraph}) moves point to
-the beginning of the paragraph that surrounds or follows point, and
-puts the mark at the end of that paragraph (@pxref{Paragraphs}).  It
-prepares the region so you can indent, case-convert, or kill a whole
-paragraph.  With a prefix argument, if the argument's value is positive,
address@hidden marks that many paragraphs starting with the one surrounding
-point.  If the prefix argument is @address@hidden, @kbd{M-h} also
-marks @var{n} paragraphs, running back form the one surrounding point.
-In that last case, point moves forward to the end of that paragraph,
-and the mark goes at the start of the region.  Repeating the @kbd{M-h}
-command extends the region to subsequent paragraphs.
-
-  @kbd{C-M-h} (@code{mark-defun}) similarly puts point before, and the
-mark after, the current (or following) major top-level definition, or
-defun (@pxref{Moving by Defuns}).  Repeating @kbd{C-M-h} extends
-the region to subsequent defuns.
-
-  @kbd{C-x C-p} (@code{mark-page}) puts point before the current page,
-and mark at the end (@pxref{Pages}).  The mark goes after the
-terminating page delimiter (to include it in the region), while point
-goes after the preceding page delimiter (to exclude it).  A numeric
-argument specifies a later page (if positive) or an earlier page (if
-negative) instead of the current page.
-
-  Finally, @kbd{C-x h} (@code{mark-whole-buffer}) sets up the entire
-buffer as the region, by putting point at the beginning and the mark at
-the end.  (In some programs this is called ``select all.'')
-
-  In Transient Mark mode, all of these commands activate the mark.
-
address@hidden Mark Ring
address@hidden The Mark Ring
-
address@hidden C-u C-SPC
address@hidden mark ring
address@hidden C-u C-@@
-  Aside from delimiting the region, the mark is also useful for
-remembering a spot that you may want to go back to.  To make this
-feature more useful, each buffer remembers 16 previous locations of the
-mark, in the @dfn{mark ring}.  Commands that set the mark also push the
-old mark onto this ring.  To return to a marked location, use @kbd{C-u
address@hidden (or @kbd{C-u C-@@}); this is the command
address@hidden given a numeric argument.  It moves point to
-where the mark was, and restores the mark from the ring of former
-marks.
-
address@hidden set-mark-command-repeat-pop
-  If you set @code{set-mark-command-repeat-pop} to address@hidden,
-then when you repeat the character @address@hidden after typing
address@hidden address@hidden, each repetition moves point to a previous mark
-position from the ring.  The mark positions you move through in this
-way are not lost; they go to the end of the ring.
-
-  Each buffer has its own mark ring.  All editing commands use the current
-buffer's mark ring.  In particular, @kbd{C-u address@hidden always stays in
-the same buffer.
-
-  Many commands that can move long distances, such as @kbd{M-<}
-(@code{beginning-of-buffer}), start by setting the mark and saving the
-old mark on the mark ring.  This is to make it easier for you to move
-back later.  Searches set the mark if they move point.  However, in
-Transient Mark mode, these commands do not set the mark when the mark
-is already active.  You can tell when a command sets the mark because
-it displays @samp{Mark set} in the echo area.
-
-  If you want to move back to the same place over and over, the mark
-ring may not be convenient enough.  If so, you can record the position
-in a register for later retrieval (@pxref{RegPos,, Saving Positions in
-Registers}).
-
address@hidden mark-ring-max
-  The variable @code{mark-ring-max} specifies the maximum number of
-entries to keep in the mark ring.  If that many entries exist and
-another one is pushed, the earliest one in the list is discarded.  Repeating
address@hidden address@hidden cycles through the positions currently in the
-ring.
-
address@hidden mark-ring
-  The variable @code{mark-ring} holds the mark ring itself, as a list of
-marker objects, with the most recent first.  This variable is local in
-every buffer.
-
address@hidden Global Mark Ring
address@hidden The Global Mark Ring
address@hidden global mark ring
-
-  In addition to the ordinary mark ring that belongs to each buffer,
-Emacs has a single @dfn{global mark ring}.  It records a sequence of
-buffers in which you have recently set the mark, so you can go back
-to those buffers.
-
-  Setting the mark always makes an entry on the current buffer's mark
-ring.  If you have switched buffers since the previous mark setting, the
-new mark position makes an entry on the global mark ring also.  The
-result is that the global mark ring records a sequence of buffers that
-you have been in, and, for each buffer, a place where you set the mark.
-
address@hidden C-x address@hidden
address@hidden pop-global-mark
-  The command @kbd{C-x address@hidden (@code{pop-global-mark}) jumps to
-the buffer and position of the latest entry in the global ring.  It also
-rotates the ring, so that successive uses of @kbd{C-x address@hidden take
-you to earlier and earlier buffers.
-
address@hidden
-   arch-tag: f35e4d82-911b-4cfc-a3d7-3c87b2abba20
address@hidden ignore