[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to orgcard.tex
|
From: |
Glenn Morris |
|
Subject: |
[Emacs-diffs] Changes to orgcard.tex |
|
Date: |
Tue, 30 Jan 2007 03:08:05 +0000 |
CVSROOT: /cvsroot/emacs
Module name: emacs
Changes by: Glenn Morris <gm> 07/01/30 03:08:04
Index: orgcard.tex
===================================================================
RCS file: orgcard.tex
diff -N orgcard.tex
--- orgcard.tex 20 Jan 2007 22:30:34 -0000 1.55
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,754 +0,0 @@
-% Reference Card for Org Mode
-\def\orgversionnumber{4.56}
-\def\versionyear{2006} % latest update
-\def\year{2007} % latest copyright year
-%
-%**start of header
-\newcount\columnsperpage
-
-% This file can be printed with 1, 2, or 3 columns per page (see below).
-% At the moment this card works quite nicely in 3 column format and
-% currently takes 2 full pages. It is thus suited to producing one
-% double-side page when printed.
-
-% There are a couple of tweaks in the format of this card which make it work
-% slightly better on A4 paper. The changes due, I think, to Stephen Eglen,
-% are commented below. Revert the changes if you want letter sized paper.
-
-% Try running something like
-% tex org-mode-ref.tex; dvips -t landscape org-mode-ref.dvi
-% to print the card
-
-\columnsperpage=3
-
-% Copyright (C) 2004 Philip Rooke
-% Copyright (C) 2005, 2006, 2007 Free Software Foundation, Inc.
-% FIXME - no Rooke in copyright.list
-
-% GNU Emacs is free software; you can redistribute it and/or modify
-% it under the terms of the GNU General Public License as published by
-% the Free Software Foundation; either version 2, or (at your option)
-% any later version.
-
-% GNU Emacs is distributed in the hope that it will be useful,
-% but WITHOUT ANY WARRANTY; without even the implied warranty of
-% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-% GNU General Public License for more details.
-
-% You should have received a copy of the GNU General Public License
-% along with GNU Emacs; see the file COPYING. If not, write to
-% the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
-
-% This file is intended to be processed by plain TeX (TeX82).
-%
-% The final reference card has six columns, three on each side.
-% This file can be used to produce it in any of three ways:
-% 1 column per page
-% produces six separate pages, each of which needs to be reduced to 80%.
-% This gives the best resolution.
-% 2 columns per page
-% produces three already-reduced pages.
-% You will still need to cut and paste.
-% 3 columns per page
-% produces two pages which must be printed sideways to make a
-% ready-to-use 8.5 x 11 inch reference card.
-% For this you need a dvi device driver that can print sideways.
-% Which mode to use is controlled by setting \columnsperpage above.
-%
-% Author:
-% Stephen Gildea
-% Internet: address@hidden
-%
-% Thanks to Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik
-% for their many good ideas.
-
-\def\shortcopyrightnotice{\vskip 1ex plus 2 fill
- \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
- Permissions on back. v\orgversionnumber}}
-
-\def\copyrightnotice{
-\vskip 1ex plus 100 fill\begingroup\small
-\centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.}
-\centerline{v\orgversionnumber{} for Org-Mode \orgversionnumber{},
\versionyear}
-\centerline{Author: Philip Rooke}
-\centerline{based on refcard design and format by Stephen Gildea}
-
-Permission is granted to make and distribute copies of
-this card provided the copyright notice and this permission notice
-are preserved on all copies.
-
-\endgroup}
-
-% make \bye not \outer so that the \def\bye in the \else clause below
-% can be scanned without complaint.
-\def\bye{\par\vfill\supereject\end}
-
-\newdimen\intercolumnskip %horizontal space between columns
-\newbox\columna %boxes to hold columns already built
-\newbox\columnb
-
-\def\ncolumns{\the\columnsperpage}
-
-\message{[\ncolumns\space
- column\if 1\ncolumns\else s\fi\space per page]}
-
-\def\scaledmag#1{ scaled \magstep #1}
-
-% This multi-way format was designed by Stephen Gildea October 1986.
-% Note that the 1-column format is fontfamily-independent.
-\if 1\ncolumns %one-column format uses normal size
- \hsize 4in
- \vsize 10in
- \voffset -.7in
- \font\titlefont=\fontname\tenbf \scaledmag3
- \font\headingfont=\fontname\tenbf \scaledmag2
- \font\smallfont=\fontname\sevenrm
- \font\smallsy=\fontname\sevensy
-
- \footline{\hss\folio}
- \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
-\else %2 or 3 columns uses prereduced size
- \hsize 3.2in
-
-% FIXME - Try to make things more A4 friendly
-% \vsize 7.95in
- \vsize 7.65in
-% \hoffset -.75in
- \hoffset -.25in
- \voffset -.745in
- \font\titlefont=cmbx10 \scaledmag2
- \font\headingfont=cmbx10 \scaledmag1
- \font\smallfont=cmr6
- \font\smallsy=cmsy6
- \font\eightrm=cmr8
- \font\eightbf=cmbx8
- \font\eightit=cmti8
- \font\eighttt=cmtt8
- \font\eightmi=cmmi8
- \font\eightsy=cmsy8
- \textfont0=\eightrm
- \textfont1=\eightmi
- \textfont2=\eightsy
- \def\rm{\eightrm}
- \def\bf{\eightbf}
- \def\it{\eightit}
- \def\tt{\eighttt}
-
-% FIXME - Try to make things more A4 friendly
-% \normalbaselineskip=.8\normalbaselineskip
- \normalbaselineskip=.7\normalbaselineskip
- \normallineskip=.8\normallineskip
- \normallineskiplimit=.8\normallineskiplimit
- \normalbaselines\rm %make definitions take effect
-
- \if 2\ncolumns
- \let\maxcolumn=b
- \footline{\hss\rm\folio\hss}
- \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
- \else \if 3\ncolumns
- \let\maxcolumn=c
- \nopagenumbers
- \else
- \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
- \errmessage{Illegal number of columns per page}
- \fi\fi
-
- \intercolumnskip=.46in
- \def\abc{a}
- \output={% %see The TeXbook page 257
- % This next line is useful when designing the layout.
- %\immediate\write16{Column \folio\abc\space starts with \firstmark}
- \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
- \else\if a\abc
- \global\setbox\columna\columnbox \global\def\abc{b}
- %% in case we never use \columnb (two-column mode)
- \global\setbox\columnb\hbox to -\intercolumnskip{}
- \else
- \global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
- \def\multicolumnformat{\shipout\vbox{\makeheadline
- \hbox{\box\columna\hskip\intercolumnskip
- \box\columnb\hskip\intercolumnskip\columnbox}
- \makefootline}\advancepageno}
- \def\columnbox{\leftline{\pagebody}}
-
- \def\bye{\par\vfill\supereject
- \if a\abc \else\null\vfill\eject\fi
- \if a\abc \else\null\vfill\eject\fi
- \end}
-\fi
-
-% we won't be using math mode much, so redefine some of the characters
-% we might want to talk about
-%\catcode`\^=12
-\catcode`\_=12
-
-% we also need the tilde, for file names.
-\catcode`\~=12
-
-\chardef\\=`\\
-\chardef\{=`\{
-\chardef\}=`\}
-
-\hyphenation{mini-buf-fer}
-
-\parindent 0pt
-\parskip 1ex plus .5ex minus .5ex
-
-\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
-
-% newcolumn - force a new column. Use sparingly, probably only for
-% the first column of a page, which should have a title anyway.
-\outer\def\newcolumn{\vfill\eject}
-
-% title - page title. Argument is title text.
-\outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}
-
-% section - new major section. Argument is section name.
-\outer\def\section#1{\par\filbreak
- \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
- \vskip 2ex plus 1ex minus 1.5ex}
-
-\newdimen\keyindent
-
-% beginindentedkeys...endindentedkeys - key definitions will be
-% indented, but running text, typically used as headings to group
-% definitions, will not.
-\def\beginindentedkeys{\keyindent=1em}
-\def\endindentedkeys{\keyindent=0em}
-\endindentedkeys
-
-% paralign - begin paragraph containing an alignment.
-% If an \halign is entered while in vertical mode, a parskip is never
-% inserted. Using \paralign instead of \halign solves this problem.
-\def\paralign{\vskip\parskip\halign}
-
-% \<...> - surrounds a variable name in a code example
-\def\<#1>{{\it #1\/}}
-
-% kbd - argument is characters typed literally. Like the Texinfo command.
-\def\kbd#1{{\tt#1}\null} %\null so not an abbrev even if period follows
-
-% beginexample...endexample - surrounds literal text, such a code example.
-% typeset in a typewriter font with line breaks preserved
-\def\beginexample{\par\leavevmode\begingroup
- \obeylines\obeyspaces\parskip0pt\tt}
-{\obeyspaces\global\let =\ }
-\def\endexample{\endgroup}
-
-% key - definition of a key.
-% \key{description of key}{key-name}
-% prints the description left-justified, and the key-name in a \kbd
-% form near the right margin.
-\def\key#1#2{\leavevmode\hbox to \hsize{\vtop
- {\hsize=.75\hsize\rightskip=1em
- \hskip\keyindent\relax#1}\kbd{#2}\hfil}}
-
-\newbox\metaxbox
-\setbox\metaxbox\hbox{\kbd{M-x }}
-\newdimen\metaxwidth
-\metaxwidth=\wd\metaxbox
-
-% metax - definition of a M-x command.
-% \metax{description of command}{M-x command-name}
-% Tries to justify the beginning of the command name at the same place
-% as \key starts the key name. (The "M-x " sticks out to the left.)
-\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
- {\hskip\keyindent\relax#1\hfil}%
- \hskip -\metaxwidth minus 1fil
- \kbd{#2}\hfil}}
-
-% threecol - like "key" but with two key names.
-% for example, one for doing the action backward, and one for forward.
-\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\hfil\quad
- &\kbd{#3}\hfil\quad\cr}
-
-%**end of header
-
-
-\title{Org-Mode Reference Card (1/2)}
-
-\centerline{(for version \orgversionnumber)}
-
-\section{Getting Started}
-%
-\vskip -1mm
-\beginexample%
-(add-to-list 'auto-mode-alist '("\\\\.org\$" . org-mode))
-(define-key global-map "\\C-cl" 'org-store-link)$^1$
-(define-key global-map "\\C-ca" 'org-agenda)$^1$
-\endexample
-%
-\metax{For the many customization options try}{M-x org-customize}
-\metax{To read the on-line documentation try}{M-x org-info}
-
-\section{Visibility Cycling}
-
-\key{rotate current subtree between states}{TAB}
-\key{rotate entire buffer between states}{S-TAB}
-\key{show the whole file}{C-c C-a}
-\key{reveal context around point}{C-c C-r}
-%\key{show branches}{C-c C-k}
-
-\section{Motion}
-
-\key{next/previous heading}{C-c C-n/p}
-\key{next/previous heading, same level}{C-c C-f/b}
-\key{backward to higher level heading}{C-c C-u}
-\key{jump to another place in document}{C-c C-j}
-\key{previous/next plain list item}{S-UP/DOWN$^3$}
-
-\section{Structure Editing}
-
-\key{insert new heading/item at current level}{M-RET}
-\key{insert new TODO entry/checkbox item}{M-S-RET}
-
-\key{promote current heading up one level}{M-LEFT}
-\key{demote current heading down one level}{M-RIGHT}
-\key{promote current subtree up one level}{M-S-LEFT}
-\key{demote current subtree down one level}{M-S-RIGHT}
-
-\key{move subtree/list item up/down}{M-S-UP/DOWN}
-\key{kill subtree}{C-c C-x C-w}
-\key{copy subtree}{C-c C-x M-w}
-\key{yank subtree}{C-c C-x C-y}
-\key{narrow buffer to current subtree}{C-x n s}
-
-\section{Archiving}
-
-\key{toggle ARCHIVE tag}{C-c C-x C-a}
-\metax{mark fully done children}{C-u C-c C-x C-a}
-\key{force cycling of an ARCHIVEd tree}{C-TAB}
-\key{move subtree to archive file}{C-c \$}
-\key{move all fully done children}{C-u C-c \$}
-To set archive location for current file, add a line like$^2$:
-\vskip -1mm
-\beginexample%
-\#+ARCHIVE: archfile::* Archived Tasks
-\endexample
-
-\section{Filtering and Sparse Trees}
-
-\key{show sparse tree for all matches of a regexp}{C-c /}
-\key{view TODO's in sparse tree}{C-c C-v}
-\key{global TODO list in agenda mode}{C-c t$^1$}
-\key{create sparse tree with all deadlines due}{C-c C-w}
-\key{time sorted view of current org file}{C-c a L}
-%\key{agenda for the week}{C-c a$^1$}
-%\key{agenda for date at cursor}{C-c C-o}
-
-\section{Tables}
-
-{\bf Creating a table}
-
-%\metax{insert a new Org-mode table}{M-x org-table-create}
-\metax{just start typing, e.g.}{|Name|Phone|Age RET |- TAB}
-\key{convert region to table}{C-c |}
-\key{... separator at least 3 spaces}{C-3 C-c |}
-
-{\bf Commands available inside tables}
-
-The following commands work when the cursor is {\it inside a table}.
-Outside of tables, the same keys may have other functionality.
-
-{\bf Re-aligning and field motion}
-
-\key{re-align the table without moving the cursor}{C-c C-c}
-\key{re-align the table, move to next field}{TAB}
-\key{move to previous field}{S-TAB}
-\key{re-align the table, move to next row}{RET}
-
-{\bf Row and column editing}
-
-\key{move the current column left}{M-LEFT}
-\key{move the current column right}{M-RIGHT}
-\key{kill the current column}{M-S-LEFT}
-\key{insert new column to left of cursor position}{M-S-RIGHT}
-
-\key{move the current row up}{M-UP}
-\key{move the current row down}{M-DOWN}
-\key{kill the current row or horizontal line}{M-S-UP}
-\key{insert new row above the current row}{M-S-DOWN}
-\key{insert horizontal line below the current row}{C-c -}
-\key{insert horizontal line above the current row}{C-u C-c -}
-\key{sort lines in region}{C-c \^{}}
-
-{\bf Regions}
-
-\key{cut rectangular region}{C-c C-x C-w}
-\key{copy rectangular region}{C-c C-x M-w}
-\key{paste rectangular region}{C-c C-x C-y}
-\key{fill paragraph across selected cells}{C-c C-q}
-
-{\bf Calculations} (in combination with Emacs \kbd{calc} package)
-
-\key{set and eval column formula}{C-c =}
-\key{set and eval named-field formula}{C-u C-c =}
-\key{edit formulas in separate buffer}{C-c '}
-\key{re-apply all stored equations to current line}{C-c *}
-\key{re-apply all stored equations to entire table}{C-u C-c *}
-
-%\kbd{TAB}, \kbd{RET} and \kbd{C-c C-c} trigger automatic recalculation
-%in lines starting with: {\tt | \# |}.
-
-\key{rotate calculation mark through \# * ! \^ \_ \$}{C-\#}
-
-\key{display column number cursor is in}{C-c ?}
-\key{sum numbers in current column/rectangle}{C-c +}
-\key{copy down with increment}{S-RET$^3$}
-
-Formulas typed in field are executed by \kbd{TAB},
-\kbd{RET} and \kbd{C-c C-c}. \kbd{=} introduces a column
-formula, \kbd{:=} a named-field formula.
-
-\key{Example: Add Col1 and Col2}{=\$1+\$2}
-\key{... with printf format specification}{=\$1+\$2;\%.2f}
-\key{... with constants from constants.el}{=\$1/\$c/\$cm}
-\key{sum from 3rd hline above to here}{:=vsum(\&III)}
-\key{apply current column formula}{=}
-
-{\bf Miscellaneous}
-
-\key{to limit column width to \kbd{N} characters, use}{...| <N> |...}
-\key{edit the current field in a separate window}{C-c `}
-\key{make current field fully visible}{C-u TAB}
-\metax{export as tab-separated file}{M-x org-table-export}
-\metax{import tab-separated file}{M-x org-table-import}
-
-{\bf Tables created with the \kbd{table.el} package}
-
-\key{insert a new \kbd{table.el} table}{C-c ~}
-\key{recognize existing table.el table}{C-c C-c}
-\key{convert table (Org-mode $\leftrightarrow$ table.el)}{C-c ~}
-
-\section{Links}
-
-\key{globally store link to the current location}{C-c l$^1$}
-\key{insert a link (TAB completes stored links)}{C-c C-l}
-\key{insert file link with file name completion}{C-u C-c C-l}
-\key{edit (also hidden part of) link at point}{C-c C-l}
-
-\key{open file links in emacs}{C-c C-o}
-\key{...force open in emacs/other window}{C-u C-c C-o}
-\key{open link at point}{mouse-1/2}
-\key{...force open in emacs/other window}{mouse-3}
-\key{record a position in mark ring}{C-c \%}
-\key{jump back to last followed link(s)}{C-c \&}
-
-{\bf Internal Links}
-
-\key{\kbd{<<My Target>>}}{\rm target}
-\key{\kbd{<<<My Target>>>}}{\rm radio target$^2$}
-\key{\kbd{[[*this text]]}}{\rm find headline}
-\metax{\kbd{[[this text]]}}{\rm find target or text in buffer}
-\metax{\kbd{[[this text][description]]}}{\rm optional link text}
-
-{\bf External Links}
-
-\key{\kbd{file:/home/dominik/img/mars.jpg}}{\rm file, absolute}
-\key{\kbd{file:papers/last.pdf}}{\rm file, relative}
-\key{\kbd{file:projects.org::*that text}}{\rm find headline}
-\key{\kbd{file:projects.org::find me}}{\rm find trgt/string}
-%\key{\kbd{file:projects.org::/regexp/}}{\rm regexp search}
-\key{\kbd{http://www.astro.uva.nl/~dominik}}{\rm on the web}
-\key{\kbd{mailto:address@hidden Email address}
-\key{\kbd{news:comp.emacs}}{\rm Usenet group}
-\key{\kbd{bbdb:Richard Stallman}}{\rm BBDB person}
-\key{\kbd{gnus:group}}{\rm GNUS group}
-\key{\kbd{gnus:group\#id}}{\rm GNUS message}
-\key{\kbd{vm|wl|mhe|rmail:folder}}{\rm Mail folder}
-\key{\kbd{vm|wl|mhe|rmail:folder\#id}}{\rm Mail message}
-\key{\kbd{info:emacs:Regexps}}{\rm Info file:node}
-\key{\kbd{shell:ls *.org}}{\rm shell command}
-\key{\kbd{elisp:(calendar)}}{\rm elisp form}
-\metax{\kbd{[[external link][description]]}}{\rm optional link text}
-%\key{\kbd{vm://address@hidden/folder\#id}}{\rm VM remote}
-
-
-\section{Remember-mode Integration}
-
-See the manual for how to make remember.el use Org-mode links and
-files. The note-finishing command \kbd{C-c C-c} will first prompt for
-an org file. In the file, find a location with:
-
-\key{rotate subtree visibility}{TAB}
-\key{next heading}{DOWN}
-\key{previous heading}{UP}
-
-Insert the note with one of the following:
-
-\key{as sublevel of heading at cursor}{RET}
-\key{right here (cursor not on heading)}{RET}
-\key{before current heading}{LEFT}
-\key{after current heading}{RIGHT}
-\key{shortcut to end of buffer (cursor at buf-start)}{RET}
-\key{Abort}{q}
-
-\section{Completion}
-
-In-buffer completion completes TODO keywords at headline start, TeX
-macros after ``{\tt \\}'', option keywords after ``{\tt \#-}'', TAGS
-after ``{\tt :}'', and dictionary words elsewhere.
-
-\key{Complete word at point}{M-TAB}
-
-
-\newcolumn
-\title{Org-Mode Reference Card (2/2)}
-
-\centerline{(for version \orgversionnumber)}
-
-\section{TODO Items and Checkboxes}
-
-\key{rotate the state of the current item}{C-c C-t}
-\key{view TODO items in a sparse tree}{C-c C-v}
-\key{view 3rd TODO keyword's sparse tree}{C-3 C-c C-v}
-
-\key{set the priority of the current item}{C-c , [ABC]}
-\key{remove priority cookie from current item}{C-c , SPC}
-\key{raise priority of current item}{S-UP$^3$}
-\key{lower priority of current item}{S-DOWN$^3$}
-
-\key{\kbd{\#+SEQ_TODO: TODO TRY BLUFF DONE}}{\rm todo workflow}
-\key{\kbd{\#+TYP_TODO: Phil home work DONE}}{\rm todo types}
-
-\key{insert new checkbox item in plain list}{M-S-RET}
-\key{toggle checkbox(es) in region/entry/at point}{C-c C-x C-b}
-\key{toggle checkbox at point}{C-c C-c}
-\metax{checkbox statistics cookies: insert {\tt [/]} or {\tt [\%]}}{}
-\key{update checkbox statistics (\kbd{C-u} : whole file)}{C-c \#}
-
-\section{Tags}
-
-\key{set tags for current heading}{C-c C-c}
-\key{realign tags in all headings}{C-u C-c C-c}
-\key{create sparse tree with matching tags}{C-c \\}
-\key{globally (agenda) match tags at cursor}{C-c C-o}
-
-\section{Timestamps}
-
-\key{prompt for date and insert timestamp}{C-c .}
-\key{like \kbd{C-c} . but insert date and time format}{C-u C-c .}
-\key{Like \kbd{C-c .} but make stamp inactive}{C-c !} % FIXME
-\key{insert DEADLINE timestamp}{C-c C-d}
-\key{insert SCHEDULED timestamp}{C-c C-s}
-\key{create sparse tree with all deadlines due}{C-c C-w}
-\key{the time between 2 dates in a time range}{C-c C-y}
-\key{change timestamp at cursor by $\pm 1$ day}{S-RIGHT/LEFT$^3$}
-\key{change year/month/day at cursor by $\pm 1$}{S-UP/DOWN$^3$}
-\key{access the calendar for the current date}{C-c >}
-\key{insert timestamp matching date in calendar}{C-c <}
-\key{access agenda for current date}{C-c C-o}
-\key{Select date while prompted}{mouse-1/RET}
-%\key{... select date in calendar}{mouse-1/RET}
-%\key{... scroll calendar back/forward one month}{< / >}
-%\key{... forward/backward one day}{S-LEFT/RIGHT}
-%\key{... forward/backward one week}{S-UP/DOWN}
-%\key{... forward/backward one month}{M-S-LEFT/RIGT}
-\key{Toggle custom format display for dates/times}{C-c C-x C-t}
-
-
-\section{Clocking Time}
-
-\key{start clock on current item}{C-c C-x C-i}
-\key{stop clock on current item}{C-c C-x C-o}
-\key{cancel current clock}{C-c C-x C-x}
-
-\key{display total subtree times}{C-c C-x C-d}
-\key{remove displayed times}{C-c C-c}
-\key{insert/update table with clock report}{C-c C-x C-r}
-
-\section{LaTeX and cdlatex-mode}
-
-\key{preview LaTeX fragment}{C-c C-x C-l}
-\key{Expand abbreviation (cdlatex-mode)}{TAB}
-\key{Insert/modify math symbol (cdlatex-mode)}{` / '}
-
-\section{Agenda Views}
-
-\key{add/move current file to front of agenda}{C-c [}
-\key{remove current file from your agenda}{C-c ]}
-\key{cycle through agenda file list}{C-,}
-
-\key{compile agenda for the current week}{C-c a a$^1$}
-\key{compile global TODO list}{C-c a t$^1$}
-\key{compile TODO list for specific keyword}{C-c a T$^1$}
-\key{match tags in agenda files}{C-c a m$^1$}
-\key{match tags in TODO entries}{C-c a M$^1$}
-\key{show timeline of current org file}{C-c a L$^1$}
-\key{configure custom commands}{C-c a C$^1$}
-\key{agenda for date at cursor}{C-c C-o}
-
-\vskip 1mm
-To set categories, add lines like$^2$:
-\vskip -1mm
-\beginexample%
-\#+CATEGORY: MyCateg
-\endexample
-
-{\bf Commands available in an agenda buffer}
-
-{\bf View Org file}
-
-\key{show original location of item}{SPC/mouse-3}
-%\key{... also available with}{mouse-3}
-\key{show and recenter window}{L}
-\key{goto original location in other window}{TAB/mouse-2}
-%\key{... also available with}{mouse-2}
-\key{goto original location, delete other windows}{RET}
-\key{toggle follow-mode}{f}
-
-{\bf Change display}
-
-\key{delete other windows}{o}
-\key{switch to daily / weekly view}{d / w}
-\key{toggle inclusion of diary entries}{D}
-\key{toggle time grid for daily schedule}{g}
-\key{toggle display of logbook entries}{l}
-\key{refresh agenda buffer with any changes}{r}
-\key{save all org-mode buffers}{s}
-\key{display the following \kbd{org-agenda-ndays}}{RIGHT}
-\key{display the previous \kbd{org-agenda-ndays}}{LEFT}
-\key{goto today}{.}
-
-{\bf Remote editing}
-
-\key{digit argument}{0-9}
-\key{change state of current TODO item}{t}
-\key{kill item and source}{C-k}
-\key{show tags of current headline}{T}
-\key{set tags for current headline}{:}
-\key{toggle ARCHIVE tag}{a}
-\key{set priority of current item}{p}
-\key{raise/lower priority of current item}{S-UP/DOWN$^3$}
-\key{display weighted priority of current item}{P}
-\key{schedule/set deadline for this item}{C-c C-s/d}
-\key{change timestamp to one day earlier/later}{S-LEFT/RIGHT$^3$}
-\key{change timestamp to today}{>}
-\key{insert new entry into diary}{i}
-
-\key{Start the clock on current item (clock-in)}{I}
-\key{Stop the clock (clock-out)}{O}
-\key{Cancel current clock}{X}
-
-
-{\bf Calendar commands}
-
-\key{find agenda cursor date in calendar}{c}
-\key{compute agenda for calendar cursor date}{c}
-\key{show phases of the moon}{M}
-\key{show sunrise/sunset times}{S}
-\key{show holidays}{H}
-\key{convert date to other calendars}{C}
-
-{\bf Quit and Exit}
-
-\key{quit agenda, remove agenda buffer}{q}
-\key{exit agenda, remove all agenda buffers}{x}
-
-\section{Calendar and Diary Integration}
-
-Include Emacs diary entries into Org-mode agenda with:
-\beginexample%
-(setq org-agenda-include-diary t)
-\endexample
-
-\section{Exporting and Publishing}
-
-Exporting creates files with extensions {\it .txt\/} and {\it .html\/}
-in the current directory. Publishing puts the resulting file into
-some other place.
-
-\key{export/publish dispatcher}{C-c C-e}
-
-\key{export visible part only}{C-c C-e v}
-\key{insert template of export options}{C-c C-x t}
-\key{toggle fixed width for entry or region}{C-c :}
-
-{\bf HTML formatting}
-
-\key{make words {\bf bold}}{*bold*}
-\key{make words {\it italic}}{/italic/}
-\key{make words \underbar{underlined}}{_underlined_}
-\key{sub- and superscripts}{x\^{}3, J_dust}
-\key{\TeX{}-like macros}{\\alpha, \\to}
-\key{typeset lines in fixed width font}{start with :}
-\key{tables are exported as HTML tables}{start with |}
-\key{links become HTML links}{http:... etc}
-\key{include html tags}{@<b>...@</b>}
-
-{\bf Export options}
-
-Include additional information for export by putting these anywhere in the
-org file. Use {\tt M-TAB} completion to make sure to get the right
-keywords. {\tt M-TAB} again just after keyword is complete inserts examples.
-
-\key{the title to be shown}{\#+TITLE:}
-\key{the author}{\#+AUTHOR:}
-\key{authors email address}{\#+EMAIL:}
-\key{language code for html}{\#+LANGUAGE:}
-\key{free text description of file}{\#+TEXT:}
-\key{... which can carry over multiple lines}{\#+TEXT:}
-%\key{settings for the export process - see below}{\#+OPTIONS:}
-\key{settings for the export process}{\#+OPTIONS:}
-
-%\key{set number of headline levels for export}{H:2}
-%\key{turn on/off section numbers}{num:t}
-%\key{turn on/off table of contents}{toc:t}
-%\key{turn on/off linebreak preservation}{\\n:nil}
-%\key{turn on/off quoted html tags}{@:t}
-%\key{turn on/off fixed width sections}{::t}
-%\key{turn on/off tables}{|:t}
-%\key{turn on/off \TeX\ syntax for sub/super-scripts}{\^{}:t}
-%\key{turn on/off emphasised text}{*:nil}
-%\key{turn on/off \TeX\ macros}{TeX:t}
-
-{\bf Comments: Text not being exported}
-
-Text before the first headline is not considered part of the document
-and is therefore never exported.
-Lines starting with \kbd{\#} are comments and are not exported.
-Subtrees whose header starts with COMMENT are never exported.
-
-\key{toggle COMMENT keyword on entry}{C-c ;}
-
-
-%\section{CUA and pc-select compatibility}%
-
-%Configure the variable {\tt org-CUA-compatibility} to make Org-mode
-%avoid the \kbd{S-<cursor>} bindings used by these modes. When set,
-%Org-mode will change the following keybindings (also in the agenda
-%buffer, but not during date selection). See note mark four$^3$
-%throughout the reference card.
-%%\vskip-mm
-%\beginexample
-%S-UP $\to$ M-p S-DOWN $\to$ M-n
-%S-LEFT $\to$ M-- S-RIGHT $\to$ M-+
-%S-RET $\to$ C-S-RET
-%\endexample
-
-\section{Dynamic Blocks}
-
-\key{update dynamic block at point}{C-c C-x C-u}
-\metax{update all dynamic blocks}{C-u C-c C-x C-u}
-
-\section{Notes}
-$^1$ This is only a suggestion for a binding of this command. Choose
-you own key as shown under INSTALLATION.
-
-$^2$ After changing a \kbd{\#+KEYWORD} or \kbd{<<<target>>>} line,
-press \kbd{C-c C-c} with the cursor still in the line to update.
-
-$^3$ Keybinding affected by {\tt org-CUA-compatibility}.
-
-\copyrightnotice
-
-\bye
-
-
-% arch-tag: 139f6750-5cfc-49ca-92b5-237fe5795290
-
-%%% Local Variables:
-%%% mode: latex
-%%% TeX-master: t
-%%% End:
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Emacs-diffs] Changes to orgcard.tex,
Glenn Morris <=