[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs]
|
From: |
Dave Love |
|
Subject: |
[Emacs-diffs] |
|
Date: |
Fri, 06 Jun 2003 05:45:24 -0400 |
Index: emacs/gc/include/gc.h
diff -c emacs/gc/include/gc.h:1.1 emacs/gc/include/gc.h:removed
*** emacs/gc/include/gc.h:1.1 Thu Jun 5 13:49:21 2003
--- emacs/gc/include/gc.h Fri Jun 6 05:45:24 2003
***************
*** 1,952 ****
- /*
- * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
- * Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
- * Copyright 1996-1999 by Silicon Graphics. All rights reserved.
- * Copyright 1999 by Hewlett-Packard Company. All rights reserved.
- *
- * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
- * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
- *
- * Permission is hereby granted to use or copy this program
- * for any purpose, provided the above notices are retained on all copies.
- * Permission to modify the code and to distribute modified code is granted,
- * provided the above notices are retained, and a notice that the code was
- * modified is included with the above copyright notice.
- */
-
- /*
- * Note that this defines a large number of tuning hooks, which can
- * safely be ignored in nearly all cases. For normal use it suffices
- * to call only GC_MALLOC and perhaps GC_REALLOC.
- * For better performance, also look at GC_MALLOC_ATOMIC, and
- * GC_enable_incremental. If you need an action to be performed
- * immediately before an object is collected, look at GC_register_finalizer.
- * If you are using Solaris threads, look at the end of this file.
- * Everything else is best ignored unless you encounter performance
- * problems.
- */
-
- #ifndef _GC_H
-
- # define _GC_H
-
- # include "gc_config_macros.h"
-
- # if defined(__STDC__) || defined(__cplusplus)
- # define GC_PROTO(args) args
- typedef void * GC_PTR;
- # define GC_CONST const
- # else
- # define GC_PROTO(args) ()
- typedef char * GC_PTR;
- # define GC_CONST
- # endif
-
- # ifdef __cplusplus
- extern "C" {
- # endif
-
-
- /* Define word and signed_word to be unsigned and signed types of the
*/
- /* size as char * or void *. There seems to be no way to do this */
- /* even semi-portably. The following is probably no better/worse */
- /* than almost anything else. */
- /* The ANSI standard suggests that size_t and ptr_diff_t might be */
- /* better choices. But those appear to have incorrect definitions */
- /* on may systems. Notably "typedef int size_t" seems to be both */
- /* frequent and WRONG.
*/
- typedef unsigned long GC_word;
- typedef long GC_signed_word;
-
- /* Public read-only variables */
-
- GC_API GC_word GC_gc_no;/* Counter incremented per collection. */
- /* Includes empty GCs at startup. */
-
- GC_API int GC_parallel; /* GC is parallelized for performance on
*/
- /* multiprocessors. Currently set only */
- /* implicitly if collector is built with */
- /* -DPARALLEL_MARK and if either: */
- /* Env variable GC_NPROC is set to > 1, or */
- /* GC_NPROC is not set and this is an MP. */
- /* If GC_parallel is set, incremental */
- /* collection is only partially functional, */
- /* and may not be desirable. */
-
-
- /* Public R/W variables */
-
- GC_API GC_PTR (*GC_oom_fn) GC_PROTO((size_t bytes_requested));
- /* When there is insufficient memory to satisfy */
- /* an allocation request, we return */
- /* (*GC_oom_fn)(). By default this just */
- /* returns 0. */
- /* If it returns, it must return 0 or a valid */
- /* pointer to a previously allocated heap */
- /* object. */
-
- GC_API int GC_find_leak;
- /* Do not actually garbage collect, but simply */
- /* report inaccessible memory that was not */
- /* deallocated with GC_free. Initial value */
- /* is determined by FIND_LEAK macro. */
-
- GC_API int GC_all_interior_pointers;
- /* Arrange for pointers to object interiors to */
- /* be recognized as valid. May not be changed */
- /* after GC initialization. */
- /* Initial value is determined by */
- /* -DALL_INTERIOR_POINTERS. */
- /* Unless DONT_ADD_BYTE_AT_END is defined, this */
- /* also affects whether sizes are increased by */
- /* at least a byte to allow "off the end" */
- /* pointer recognition. */
- /* MUST BE 0 or 1. */
-
- GC_API int GC_quiet; /* Disable statistics output. Only matters if */
- /* collector has been compiled with statistics */
- /* enabled. This involves a performance cost, */
- /* and is thus not the default. */
-
- GC_API int GC_finalize_on_demand;
- /* If nonzero, finalizers will only be run in */
- /* response to an explicit GC_invoke_finalizers */
- /* call. The default is determined by whether */
- /* the FINALIZE_ON_DEMAND macro is defined */
- /* when the collector is built. */
-
- GC_API int GC_java_finalization;
- /* Mark objects reachable from finalizable */
- /* objects in a separate postpass. This makes */
- /* it a bit safer to use non-topologically- */
- /* ordered finalization. Default value is */
- /* determined by JAVA_FINALIZATION macro. */
-
- GC_API void (* GC_finalizer_notifier)();
- /* Invoked by the collector when there are */
- /* objects to be finalized. Invoked at most */
- /* once per GC cycle. Never invoked unless */
- /* GC_finalize_on_demand is set. */
- /* Typically this will notify a finalization */
- /* thread, which will call GC_invoke_finalizers */
- /* in response. */
-
- GC_API int GC_dont_gc; /* != 0 ==> Dont collect. In versions 7.2a1+,
*/
- /* this overrides explicit GC_gcollect() calls. */
- /* Used as a counter, so that nested enabling */
- /* and disabling work correctly. Should */
- /* normally be updated with GC_enable() and */
- /* GC_disable() calls. */
- /* Direct assignment to GC_dont_gc is */
- /* deprecated. */
-
- GC_API int GC_dont_expand;
- /* Dont expand heap unless explicitly requested */
- /* or forced to. */
-
- GC_API int GC_use_entire_heap;
- /* Causes the nonincremental collector to use the */
- /* entire heap before collecting. This was the only */
- /* option for GC versions < 5.0. This sometimes */
- /* results in more large block fragmentation, since */
- /* very larg blocks will tend to get broken up */
- /* during each GC cycle. It is likely to result in a */
- /* larger working set, but lower collection */
- /* frequencies, and hence fewer instructions executed */
- /* in the collector. */
-
- GC_API int GC_full_freq; /* Number of partial collections between */
- /* full collections. Matters only if */
- /* GC_incremental is set. */
- /* Full collections are also triggered if */
- /* the collector detects a substantial */
- /* increase in the number of in-use heap */
- /* blocks. Values in the tens are now */
- /* perfectly reasonable, unlike for */
- /* earlier GC versions. */
-
- GC_API GC_word GC_non_gc_bytes;
- /* Bytes not considered candidates for collection. */
- /* Used only to control scheduling of collections. */
- /* Updated by GC_malloc_uncollectable and GC_free. */
- /* Wizards only. */
-
- GC_API int GC_no_dls;
- /* Don't register dynamic library data segments. */
- /* Wizards only. Should be used only if the */
- /* application explicitly registers all roots. */
- /* In Microsoft Windows environments, this will */
- /* usually also prevent registration of the */
- /* main data segment as part of the root set. */
-
- GC_API GC_word GC_free_space_divisor;
- /* We try to make sure that we allocate at */
- /* least N/GC_free_space_divisor bytes between */
- /* collections, where N is the heap size plus */
- /* a rough estimate of the root set size. */
- /* Initially, GC_free_space_divisor = 4. */
- /* Increasing its value will use less space */
- /* but more collection time. Decreasing it */
- /* will appreciably decrease collection time */
- /* at the expense of space. */
- /* GC_free_space_divisor = 1 will effectively */
- /* disable collections. */
-
- GC_API GC_word GC_max_retries;
- /* The maximum number of GCs attempted before */
- /* reporting out of memory after heap */
- /* expansion fails. Initially 0. */
-
-
- GC_API char *GC_stackbottom; /* Cool end of user stack. */
- /* May be set in the client prior to */
- /* calling any GC_ routines. This */
- /* avoids some overhead, and */
- /* potentially some signals that can */
- /* confuse debuggers. Otherwise the */
- /* collector attempts to set it */
- /* automatically. */
- /* For multithreaded code, this is the */
- /* cold end of the stack for the */
- /* primordial thread. */
-
- GC_API int GC_dont_precollect; /* Don't collect as part of */
- /* initialization. Should be set only */
- /* if the client wants a chance to */
- /* manually initialize the root set */
- /* before the first collection. */
- /* Interferes with blacklisting. */
- /* Wizards only. */
-
- GC_API unsigned long GC_time_limit;
- /* If incremental collection is enabled, */
- /* We try to terminate collections */
- /* after this many milliseconds. Not a */
- /* hard time bound. Setting this to */
- /* GC_TIME_UNLIMITED will essentially */
- /* disable incremental collection while */
- /* leaving generational collection */
- /* enabled. */
- # define GC_TIME_UNLIMITED 999999
- /* Setting GC_time_limit to this value */
- /* will disable the "pause time exceeded"*/
- /* tests. */
-
- /* Public procedures */
-
- /* Initialize the collector. This is only required when using thread-local
- * allocation, since unlike the regular allocation routines, GC_local_malloc
- * is not self-initializing. If you use GC_local_malloc you should arrange
- * to call this somehow (e.g. from a constructor) before doing any allocation.
- */
- GC_API void GC_init GC_PROTO((void));
-
- /*
- * general purpose allocation routines, with roughly malloc calling conv.
- * The atomic versions promise that no relevant pointers are contained
- * in the object. The nonatomic versions guarantee that the new object
- * is cleared. GC_malloc_stubborn promises that no changes to the object
- * will occur after GC_end_stubborn_change has been called on the
- * result of GC_malloc_stubborn. GC_malloc_uncollectable allocates an object
- * that is scanned for pointers to collectable objects, but is not itself
- * collectable. The object is scanned even if it does not appear to
- * be reachable. GC_malloc_uncollectable and GC_free called on the resulting
- * object implicitly update GC_non_gc_bytes appropriately.
- *
- * Note that the GC_malloc_stubborn support is stubbed out by default
- * starting in 6.0. GC_malloc_stubborn is an alias for GC_malloc unless
- * the collector is built with STUBBORN_ALLOC defined.
- */
- GC_API GC_PTR GC_malloc GC_PROTO((size_t size_in_bytes));
- GC_API GC_PTR GC_malloc_atomic GC_PROTO((size_t size_in_bytes));
- GC_API GC_PTR GC_malloc_uncollectable GC_PROTO((size_t size_in_bytes));
- GC_API GC_PTR GC_malloc_stubborn GC_PROTO((size_t size_in_bytes));
-
- /* The following is only defined if the library has been suitably */
- /* compiled: */
- GC_API GC_PTR GC_malloc_atomic_uncollectable GC_PROTO((size_t size_in_bytes));
-
- /* Explicitly deallocate an object. Dangerous if used incorrectly. */
- /* Requires a pointer to the base of an object.
*/
- /* If the argument is stubborn, it should not be changeable when freed. */
- /* An object should not be enable for finalization when it is
*/
- /* explicitly deallocated. */
- /* GC_free(0) is a no-op, as required by ANSI C for free. */
- GC_API void GC_free GC_PROTO((GC_PTR object_addr));
-
- /*
- * Stubborn objects may be changed only if the collector is explicitly
informed.
- * The collector is implicitly informed of coming change when such
- * an object is first allocated. The following routines inform the
- * collector that an object will no longer be changed, or that it will
- * once again be changed. Only nonNIL pointer stores into the object
- * are considered to be changes. The argument to GC_end_stubborn_change
- * must be exacly the value returned by GC_malloc_stubborn or passed to
- * GC_change_stubborn. (In the second case it may be an interior pointer
- * within 512 bytes of the beginning of the objects.)
- * There is a performance penalty for allowing more than
- * one stubborn object to be changed at once, but it is acceptable to
- * do so. The same applies to dropping stubborn objects that are still
- * changeable.
- */
- GC_API void GC_change_stubborn GC_PROTO((GC_PTR));
- GC_API void GC_end_stubborn_change GC_PROTO((GC_PTR));
-
- /* Return a pointer to the base (lowest address) of an object given */
- /* a pointer to a location within the object. */
- /* I.e. map an interior pointer to the corresponding bas pointer. */
- /* Note that with debugging allocation, this returns a pointer to the */
- /* actual base of the object, i.e. the debug information, not to */
- /* the base of the user object.
*/
- /* Return 0 if displaced_pointer doesn't point to within a valid */
- /* object. */
- GC_API GC_PTR GC_base GC_PROTO((GC_PTR displaced_pointer));
-
- /* Given a pointer to the base of an object, return its size in bytes.
*/
- /* The returned size may be slightly larger than what was originally */
- /* requested. */
- GC_API size_t GC_size GC_PROTO((GC_PTR object_addr));
-
- /* For compatibility with C library. This is occasionally faster than
*/
- /* a malloc followed by a bcopy. But if you rely on that, either here
*/
- /* or with the standard C library, your code is broken. In my
*/
- /* opinion, it shouldn't have been invented, but now we're stuck. -HB */
- /* The resulting object has the same kind as the original. */
- /* If the argument is stubborn, the result will have changes enabled. */
- /* It is an error to have changes enabled for the original object. */
- /* Follows ANSI comventions for NULL old_object. */
- GC_API GC_PTR GC_realloc
- GC_PROTO((GC_PTR old_object, size_t new_size_in_bytes));
-
- /* Explicitly increase the heap size. */
- /* Returns 0 on failure, 1 on success. */
- GC_API int GC_expand_hp GC_PROTO((size_t number_of_bytes));
-
- /* Limit the heap size to n bytes. Useful when you're debugging, */
- /* especially on systems that don't handle running out of memory well.
*/
- /* n == 0 ==> unbounded. This is the default.
*/
- GC_API void GC_set_max_heap_size GC_PROTO((GC_word n));
-
- /* Inform the collector that a certain section of statically allocated
*/
- /* memory contains no pointers to garbage collected memory. Thus it */
- /* need not be scanned. This is sometimes important if the application */
- /* maps large read/write files into the address space, which could be */
- /* mistaken for dynamic library data segments on some systems.
*/
- GC_API void GC_exclude_static_roots GC_PROTO((GC_PTR start, GC_PTR finish));
-
- /* Clear the set of root segments. Wizards only. */
- GC_API void GC_clear_roots GC_PROTO((void));
-
- /* Add a root segment. Wizards only. */
- GC_API void GC_add_roots GC_PROTO((char * low_address,
- char * high_address_plus_1));
-
- /* Add a displacement to the set of those considered valid by the */
- /* collector. GC_register_displacement(n) means that if p was returned */
- /* by GC_malloc, then (char *)p + n will be considered to be a valid */
- /* pointer to n. N must be small and less than the size of p.
*/
- /* (All pointers to the interior of objects from the stack are
*/
- /* considered valid in any case. This applies to heap objects and */
- /* static data.) */
- /* Preferably, this should be called before any other GC procedures. */
- /* Calling it later adds to the probability of excess memory */
- /* retention. */
- /* This is a no-op if the collector was compiled with recognition of */
- /* arbitrary interior pointers enabled, which is now the default. */
- GC_API void GC_register_displacement GC_PROTO((GC_word n));
-
- /* The following version should be used if any debugging allocation is
*/
- /* being done.
*/
- GC_API void GC_debug_register_displacement GC_PROTO((GC_word n));
-
- /* Explicitly trigger a full, world-stop collection. */
- GC_API void GC_gcollect GC_PROTO((void));
-
- /* Trigger a full world-stopped collection. Abort the collection if */
- /* and when stop_func returns a nonzero value. Stop_func will be */
- /* called frequently, and should be reasonably fast. This works even */
- /* if virtual dirty bits, and hence incremental collection is not */
- /* available for this architecture. Collections can be aborted faster
*/
- /* than normal pause times for incremental collection. However, */
- /* aborted collections do no useful work; the next collection needs */
- /* to start from the beginning.
*/
- /* Return 0 if the collection was aborted, 1 if it succeeded. */
- typedef int (* GC_stop_func) GC_PROTO((void));
- GC_API int GC_try_to_collect GC_PROTO((GC_stop_func stop_func));
-
- /* Return the number of bytes in the heap. Excludes collector private
*/
- /* data structures. Includes empty blocks and fragmentation loss. */
- /* Includes some pages that were allocated but never written. */
- GC_API size_t GC_get_heap_size GC_PROTO((void));
-
- /* Return a lower bound on the number of free bytes in the heap. */
- GC_API size_t GC_get_free_bytes GC_PROTO((void));
-
- /* Return the number of bytes allocated since the last collection. */
- GC_API size_t GC_get_bytes_since_gc GC_PROTO((void));
-
- /* Return the total number of bytes allocated in this process.
*/
- /* Never decreases, except due to wrapping. */
- GC_API size_t GC_get_total_bytes GC_PROTO((void));
-
- /* Disable garbage collection. Even GC_gcollect calls will be
*/
- /* ineffective.
*/
- GC_API void GC_disable GC_PROTO((void));
-
- /* Reenable garbage collection. GC_diable() and GC_enable() calls */
- /* nest. Garbage collection is enabled if the number of calls to both
*/
- /* both functions is equal. */
- GC_API void GC_enable GC_PROTO((void));
-
- /* Enable incremental/generational collection. */
- /* Not advisable unless dirty bits are */
- /* available or most heap objects are */
- /* pointerfree(atomic) or immutable. */
- /* Don't use in leak finding mode. */
- /* Ignored if GC_dont_gc is true. */
- /* Only the generational piece of this is */
- /* functional if GC_parallel is TRUE */
- /* or if GC_time_limit is GC_TIME_UNLIMITED. */
- /* Causes GC_local_gcj_malloc() to revert to */
- /* locked allocation. Must be called */
- /* before any GC_local_gcj_malloc() calls. */
- GC_API void GC_enable_incremental GC_PROTO((void));
-
- /* Does incremental mode write-protect pages? Returns zero or */
- /* more of the following, or'ed together: */
- #define GC_PROTECTS_POINTER_HEAP 1 /* May protect non-atomic objs. */
- #define GC_PROTECTS_PTRFREE_HEAP 2
- #define GC_PROTECTS_STATIC_DATA 4 /* Curently never.
*/
- #define GC_PROTECTS_STACK 8 /* Probably impractical. */
-
- #define GC_PROTECTS_NONE 0
- GC_API int GC_incremental_protection_needs GC_PROTO((void));
-
- /* Perform some garbage collection work, if appropriate. */
- /* Return 0 if there is no more work to be done. */
- /* Typically performs an amount of work corresponding roughly */
- /* to marking from one page. May do more work if further */
- /* progress requires it, e.g. if incremental collection is */
- /* disabled. It is reasonable to call this in a wait loop */
- /* until it returns 0. */
- GC_API int GC_collect_a_little GC_PROTO((void));
-
- /* Allocate an object of size lb bytes. The client guarantees that */
- /* as long as the object is live, it will be referenced by a pointer */
- /* that points to somewhere within the first 256 bytes of the object. */
- /* (This should normally be declared volatile to prevent the compiler */
- /* from invalidating this assertion.) This routine is only useful */
- /* if a large array is being allocated. It reduces the chance of */
- /* accidentally retaining such an array as a result of scanning an */
- /* integer that happens to be an address inside the array. (Actually,
*/
- /* it reduces the chance of the allocator not finding space for such */
- /* an array, since it will try hard to avoid introducing such a false */
- /* reference.) On a SunOS 4.X or MS Windows system this is recommended */
- /* for arrays likely to be larger than 100K or so. For other systems,
*/
- /* or if the collector is not configured to recognize all interior */
- /* pointers, the threshold is normally much higher. */
- GC_API GC_PTR GC_malloc_ignore_off_page GC_PROTO((size_t lb));
- GC_API GC_PTR GC_malloc_atomic_ignore_off_page GC_PROTO((size_t lb));
-
- #if defined(__sgi) && !defined(__GNUC__) && _COMPILER_VERSION >= 720
- # define GC_ADD_CALLER
- # define GC_RETURN_ADDR (GC_word)__return_address
- #endif
-
- #ifdef __linux__
- # include <features.h>
- # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \
- && !defined(__ia64__)
- # define GC_HAVE_BUILTIN_BACKTRACE
- # define GC_CAN_SAVE_CALL_STACKS
- # endif
- # if defined(__i386__) || defined(__x86_64__)
- # define GC_CAN_SAVE_CALL_STACKS
- # endif
- #endif
-
- #if defined(__sparc__)
- # define GC_CAN_SAVE_CALL_STACKS
- #endif
-
- /* If we're on an a platform on which we can't save call stacks, but */
- /* gcc is normally used, we go ahead and define GC_ADD_CALLER. */
- /* We make this decision independent of whether gcc is actually being */
- /* used, in order to keep the interface consistent, and allow mixing */
- /* of compilers. */
- /* This may also be desirable if it is possible but expensive to */
- /* retrieve the call chain. */
- #if (defined(__linux__) || defined(__NetBSD__) || defined(__OpenBSD__) \
- || defined(__FreeBSD__)) & !defined(GC_CAN_SAVE_CALL_STACKS)
- # define GC_ADD_CALLER
- # if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
- /* gcc knows how to retrieve return address, but we don't know */
- /* how to generate call stacks. */
- # define GC_RETURN_ADDR (GC_word)__builtin_return_address(0)
- # else
- /* Just pass 0 for gcc compatibility. */
- # define GC_RETURN_ADDR 0
- # endif
- #endif
-
- #ifdef GC_ADD_CALLER
- # define GC_EXTRAS GC_RETURN_ADDR, __FILE__, __LINE__
- # define GC_EXTRA_PARAMS GC_word ra, GC_CONST char * s, int i
- #else
- # define GC_EXTRAS __FILE__, __LINE__
- # define GC_EXTRA_PARAMS GC_CONST char * s, int i
- #endif
-
- /* Debugging (annotated) allocation. GC_gcollect will check */
- /* objects allocated in this way for overwrites, etc. */
- GC_API GC_PTR GC_debug_malloc
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API GC_PTR GC_debug_malloc_atomic
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API GC_PTR GC_debug_malloc_uncollectable
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API GC_PTR GC_debug_malloc_stubborn
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API GC_PTR GC_debug_malloc_ignore_off_page
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API GC_PTR GC_debug_malloc_atomic_ignore_off_page
- GC_PROTO((size_t size_in_bytes, GC_EXTRA_PARAMS));
- GC_API void GC_debug_free GC_PROTO((GC_PTR object_addr));
- GC_API GC_PTR GC_debug_realloc
- GC_PROTO((GC_PTR old_object, size_t new_size_in_bytes,
- GC_EXTRA_PARAMS));
- GC_API void GC_debug_change_stubborn GC_PROTO((GC_PTR));
- GC_API void GC_debug_end_stubborn_change GC_PROTO((GC_PTR));
-
- /* Routines that allocate objects with debug information (like the */
- /* above), but just fill in dummy file and line number information. */
- /* Thus they can serve as drop-in malloc/realloc replacements. This */
- /* can be useful for two reasons: */
- /* 1) It allows the collector to be built with DBG_HDRS_ALL defined */
- /* even if some allocation calls come from 3rd party libraries */
- /* that can't be recompiled.
*/
- /* 2) On some platforms, the file and line information is redundant, */
- /* since it can be reconstructed from a stack trace. On such */
- /* platforms it may be more convenient not to recompile, e.g. for */
- /* leak detection. This can be accomplished by instructing the */
- /* linker to replace malloc/realloc with these. */
- GC_API GC_PTR GC_debug_malloc_replacement GC_PROTO((size_t size_in_bytes));
- GC_API GC_PTR GC_debug_realloc_replacement
- GC_PROTO((GC_PTR object_addr, size_t size_in_bytes));
-
- # ifdef GC_DEBUG
- # define GC_MALLOC(sz) GC_debug_malloc(sz, GC_EXTRAS)
- # define GC_MALLOC_ATOMIC(sz) GC_debug_malloc_atomic(sz, GC_EXTRAS)
- # define GC_MALLOC_UNCOLLECTABLE(sz) \
- GC_debug_malloc_uncollectable(sz, GC_EXTRAS)
- # define GC_MALLOC_IGNORE_OFF_PAGE(sz) \
- GC_debug_malloc_ignore_off_page(sz, GC_EXTRAS)
- # define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \
- GC_debug_malloc_atomic_ignore_off_page(sz, GC_EXTRAS)
- # define GC_REALLOC(old, sz) GC_debug_realloc(old, sz, GC_EXTRAS)
- # define GC_FREE(p) GC_debug_free(p)
- # define GC_REGISTER_FINALIZER(p, f, d, of, od) \
- GC_debug_register_finalizer(p, f, d, of, od)
- # define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
- GC_debug_register_finalizer_ignore_self(p, f, d, of, od)
- # define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
- GC_debug_register_finalizer_no_order(p, f, d, of, od)
- # define GC_MALLOC_STUBBORN(sz) GC_debug_malloc_stubborn(sz, GC_EXTRAS);
- # define GC_CHANGE_STUBBORN(p) GC_debug_change_stubborn(p)
- # define GC_END_STUBBORN_CHANGE(p) GC_debug_end_stubborn_change(p)
- # define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
- GC_general_register_disappearing_link(link, GC_base(obj))
- # define GC_REGISTER_DISPLACEMENT(n) GC_debug_register_displacement(n)
- # else
- # define GC_MALLOC(sz) GC_malloc(sz)
- # define GC_MALLOC_ATOMIC(sz) GC_malloc_atomic(sz)
- # define GC_MALLOC_UNCOLLECTABLE(sz) GC_malloc_uncollectable(sz)
- # define GC_MALLOC_IGNORE_OFF_PAGE(sz) \
- GC_malloc_ignore_off_page(sz)
- # define GC_MALLOC_ATOMIC_IGNORE_OFF_PAGE(sz) \
- GC_malloc_atomic_ignore_off_page(sz)
- # define GC_REALLOC(old, sz) GC_realloc(old, sz)
- # define GC_FREE(p) GC_free(p)
- # define GC_REGISTER_FINALIZER(p, f, d, of, od) \
- GC_register_finalizer(p, f, d, of, od)
- # define GC_REGISTER_FINALIZER_IGNORE_SELF(p, f, d, of, od) \
- GC_register_finalizer_ignore_self(p, f, d, of, od)
- # define GC_REGISTER_FINALIZER_NO_ORDER(p, f, d, of, od) \
- GC_register_finalizer_no_order(p, f, d, of, od)
- # define GC_MALLOC_STUBBORN(sz) GC_malloc_stubborn(sz)
- # define GC_CHANGE_STUBBORN(p) GC_change_stubborn(p)
- # define GC_END_STUBBORN_CHANGE(p) GC_end_stubborn_change(p)
- # define GC_GENERAL_REGISTER_DISAPPEARING_LINK(link, obj) \
- GC_general_register_disappearing_link(link, obj)
- # define GC_REGISTER_DISPLACEMENT(n) GC_register_displacement(n)
- # endif
- /* The following are included because they are often convenient, and */
- /* reduce the chance for a misspecifed size argument. But calls may */
- /* expand to something syntactically incorrect if t is a complicated */
- /* type expression. */
- # define GC_NEW(t) (t *)GC_MALLOC(sizeof (t))
- # define GC_NEW_ATOMIC(t) (t *)GC_MALLOC_ATOMIC(sizeof (t))
- # define GC_NEW_STUBBORN(t) (t *)GC_MALLOC_STUBBORN(sizeof (t))
- # define GC_NEW_UNCOLLECTABLE(t) (t *)GC_MALLOC_UNCOLLECTABLE(sizeof (t))
-
- /* Finalization. Some of these primitives are grossly unsafe.
*/
- /* The idea is to make them both cheap, and sufficient to build
*/
- /* a safer layer, closer to PCedar finalization. */
- /* The interface represents my conclusions from a long discussion */
- /* with Alan Demers, Dan Greene, Carl Hauser, Barry Hayes, */
- /* Christian Jacobi, and Russ Atkinson. It's not perfect, and
*/
- /* probably nobody else agrees with it. Hans-J. Boehm 3/13/92
*/
- typedef void (*GC_finalization_proc)
- GC_PROTO((GC_PTR obj, GC_PTR client_data));
-
- GC_API void GC_register_finalizer
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
- GC_API void GC_debug_register_finalizer
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
- /* When obj is no longer accessible, invoke */
- /* (*fn)(obj, cd). If a and b are inaccessible, and */
- /* a points to b (after disappearing links have been */
- /* made to disappear), then only a will be */
- /* finalized. (If this does not create any new */
- /* pointers to b, then b will be finalized after the */
- /* next collection.) Any finalizable object that */
- /* is reachable from itself by following one or more */
- /* pointers will not be finalized (or collected). */
- /* Thus cycles involving finalizable objects should */
- /* be avoided, or broken by disappearing links. */
- /* All but the last finalizer registered for an object */
- /* is ignored. */
- /* Finalization may be removed by passing 0 as fn. */
- /* Finalizers are implicitly unregistered just before */
- /* they are invoked. */
- /* The old finalizer and client data are stored in */
- /* *ofn and *ocd. */
- /* Fn is never invoked on an accessible object, */
- /* provided hidden pointers are converted to real */
- /* pointers only if the allocation lock is held, and */
- /* such conversions are not performed by finalization */
- /* routines. */
- /* If GC_register_finalizer is aborted as a result of */
- /* a signal, the object may be left with no */
- /* finalization, even if neither the old nor new */
- /* finalizer were NULL. */
- /* Obj should be the nonNULL starting address of an */
- /* object allocated by GC_malloc or friends. */
- /* Note that any garbage collectable object referenced */
- /* by cd will be considered accessible until the */
- /* finalizer is invoked. */
-
- /* Another versions of the above follow. It ignores */
- /* self-cycles, i.e. pointers from a finalizable object to */
- /* itself. There is a stylistic argument that this is wrong, */
- /* but it's unavoidable for C++, since the compiler may */
- /* silently introduce these. It's also benign in that specific */
- /* case. And it helps if finalizable objects are split to */
- /* avoid cycles. */
- /* Note that cd will still be viewed as accessible, even if it */
- /* refers to the object itself. */
- GC_API void GC_register_finalizer_ignore_self
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
- GC_API void GC_debug_register_finalizer_ignore_self
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
-
- /* Another version of the above. It ignores all cycles. */
- /* It should probably only be used by Java implementations. */
- /* Note that cd will still be viewed as accessible, even if it */
- /* refers to the object itself. */
- GC_API void GC_register_finalizer_no_order
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
- GC_API void GC_debug_register_finalizer_no_order
- GC_PROTO((GC_PTR obj, GC_finalization_proc fn, GC_PTR cd,
- GC_finalization_proc *ofn, GC_PTR *ocd));
-
-
- /* The following routine may be used to break cycles between */
- /* finalizable objects, thus causing cyclic finalizable */
- /* objects to be finalized in the correct order. Standard */
- /* use involves calling GC_register_disappearing_link(&p), */
- /* where p is a pointer that is not followed by finalization */
- /* code, and should not be considered in determining */
- /* finalization order. */
- GC_API int GC_register_disappearing_link GC_PROTO((GC_PTR * /* link */));
- /* Link should point to a field of a heap allocated */
- /* object obj. *link will be cleared when obj is */
- /* found to be inaccessible. This happens BEFORE any */
- /* finalization code is invoked, and BEFORE any */
- /* decisions about finalization order are made. */
- /* This is useful in telling the finalizer that */
- /* some pointers are not essential for proper */
- /* finalization. This may avoid finalization cycles. */
- /* Note that obj may be resurrected by another */
- /* finalizer, and thus the clearing of *link may */
- /* be visible to non-finalization code. */
- /* There's an argument that an arbitrary action should */
- /* be allowed here, instead of just clearing a pointer. */
- /* But this causes problems if that action alters, or */
- /* examines connectivity. */
- /* Returns 1 if link was already registered, 0 */
- /* otherwise. */
- /* Only exists for backward compatibility. See below: */
-
- GC_API int GC_general_register_disappearing_link
- GC_PROTO((GC_PTR * /* link */, GC_PTR obj));
- /* A slight generalization of the above. *link is */
- /* cleared when obj first becomes inaccessible. This */
- /* can be used to implement weak pointers easily and */
- /* safely. Typically link will point to a location */
- /* holding a disguised pointer to obj. (A pointer */
- /* inside an "atomic" object is effectively */
- /* disguised.) In this way soft */
- /* pointers are broken before any object */
- /* reachable from them are finalized. Each link */
- /* May be registered only once, i.e. with one obj */
- /* value. This was added after a long email discussion */
- /* with John Ellis. */
- /* Obj must be a pointer to the first word of an object */
- /* we allocated. It is unsafe to explicitly deallocate */
- /* the object containing link. Explicitly deallocating */
- /* obj may or may not cause link to eventually be */
- /* cleared. */
- GC_API int GC_unregister_disappearing_link GC_PROTO((GC_PTR * /* link */));
- /* Returns 0 if link was not actually registered. */
- /* Undoes a registration by either of the above two */
- /* routines. */
-
- /* Returns !=0 if GC_invoke_finalizers has something to do. */
- GC_API int GC_should_invoke_finalizers GC_PROTO((void));
-
- GC_API int GC_invoke_finalizers GC_PROTO((void));
- /* Run finalizers for all objects that are ready to */
- /* be finalized. Return the number of finalizers */
- /* that were run. Normally this is also called */
- /* implicitly during some allocations. If */
- /* GC-finalize_on_demand is nonzero, it must be called */
- /* explicitly. */
-
- /* GC_set_warn_proc can be used to redirect or filter warning messages.
*/
- /* p may not be a NULL pointer.
*/
- typedef void (*GC_warn_proc) GC_PROTO((char *msg, GC_word arg));
- GC_API GC_warn_proc GC_set_warn_proc GC_PROTO((GC_warn_proc p));
- /* Returns old warning procedure. */
-
- GC_API GC_word GC_set_free_space_divisor GC_PROTO((GC_word value));
- /* Set free_space_divisor. See above for definition. */
- /* Returns old value. */
-
- /* The following is intended to be used by a higher level */
- /* (e.g. Java-like) finalization facility. It is expected */
- /* that finalization code will arrange for hidden pointers to */
- /* disappear. Otherwise objects can be accessed after they */
- /* have been collected. */
- /* Note that putting pointers in atomic objects or in */
- /* nonpointer slots of "typed" objects is equivalent to */
- /* disguising them in this way, and may have other advantages. */
- # if defined(I_HIDE_POINTERS) || defined(GC_I_HIDE_POINTERS)
- typedef GC_word GC_hidden_pointer;
- # define HIDE_POINTER(p) (~(GC_hidden_pointer)(p))
- # define REVEAL_POINTER(p) ((GC_PTR)(HIDE_POINTER(p)))
- /* Converting a hidden pointer to a real pointer requires verifying
*/
- /* that the object still exists. This involves acquiring the */
- /* allocator lock to avoid a race with the collector. */
- # endif /* I_HIDE_POINTERS */
-
- typedef GC_PTR (*GC_fn_type) GC_PROTO((GC_PTR client_data));
- GC_API GC_PTR GC_call_with_alloc_lock
- GC_PROTO((GC_fn_type fn, GC_PTR client_data));
-
- /* The following routines are primarily intended for use with a */
- /* preprocessor which inserts calls to check C pointer arithmetic. */
-
- /* Check that p and q point to the same object. */
- /* Fail conspicuously if they don't. */
- /* Returns the first argument. */
- /* Succeeds if neither p nor q points to the heap. */
- /* May succeed if both p and q point to between heap objects. */
- GC_API GC_PTR GC_same_obj GC_PROTO((GC_PTR p, GC_PTR q));
-
- /* Checked pointer pre- and post- increment operations. Note that */
- /* the second argument is in units of bytes, not multiples of the */
- /* object size. This should either be invoked from a macro, or the */
- /* call should be automatically generated. */
- GC_API GC_PTR GC_pre_incr GC_PROTO((GC_PTR *p, size_t how_much));
- GC_API GC_PTR GC_post_incr GC_PROTO((GC_PTR *p, size_t how_much));
-
- /* Check that p is visible */
- /* to the collector as a possibly pointer containing location.
*/
- /* If it isn't fail conspicuously. */
- /* Returns the argument in all cases. May erroneously succeed
*/
- /* in hard cases. (This is intended for debugging use with */
- /* untyped allocations. The idea is that it should be possible, though
*/
- /* slow, to add such a call to all indirect pointer stores.) */
- /* Currently useless for multithreaded worlds.
*/
- GC_API GC_PTR GC_is_visible GC_PROTO((GC_PTR p));
-
- /* Check that if p is a pointer to a heap page, then it points to */
- /* a valid displacement within a heap object. */
- /* Fail conspicuously if this property does not hold. */
- /* Uninteresting with GC_all_interior_pointers.
*/
- /* Always returns its argument.
*/
- GC_API GC_PTR GC_is_valid_displacement GC_PROTO((GC_PTR p));
-
- /* Safer, but slow, pointer addition. Probably useful mainly with */
- /* a preprocessor. Useful only for heap pointers. */
- #ifdef GC_DEBUG
- # define GC_PTR_ADD3(x, n, type_of_result) \
- ((type_of_result)GC_same_obj((x)+(n), (x)))
- # define GC_PRE_INCR3(x, n, type_of_result) \
- ((type_of_result)GC_pre_incr(&(x), (n)*sizeof(*x))
- # define GC_POST_INCR2(x, type_of_result) \
- ((type_of_result)GC_post_incr(&(x), sizeof(*x))
- # ifdef __GNUC__
- # define GC_PTR_ADD(x, n) \
- GC_PTR_ADD3(x, n, typeof(x))
- # define GC_PRE_INCR(x, n) \
- GC_PRE_INCR3(x, n, typeof(x))
- # define GC_POST_INCR(x, n) \
- GC_POST_INCR3(x, typeof(x))
- # else
- /* We can't do this right without typeof, which ANSI */
- /* decided was not sufficiently useful. Repeatedly */
- /* mentioning the arguments seems too dangerous to be */
- /* useful. So does not casting the result. */
- # define GC_PTR_ADD(x, n) ((x)+(n))
- # endif
- #else /* !GC_DEBUG */
- # define GC_PTR_ADD3(x, n, type_of_result) ((x)+(n))
- # define GC_PTR_ADD(x, n) ((x)+(n))
- # define GC_PRE_INCR3(x, n, type_of_result) ((x) += (n))
- # define GC_PRE_INCR(x, n) ((x) += (n))
- # define GC_POST_INCR2(x, n, type_of_result) ((x)++)
- # define GC_POST_INCR(x, n) ((x)++)
- #endif
-
- /* Safer assignment of a pointer to a nonstack location. */
- #ifdef GC_DEBUG
- # ifdef __STDC__
- # define GC_PTR_STORE(p, q) \
- (*(void **)GC_is_visible(p) = GC_is_valid_displacement(q))
- # else
- # define GC_PTR_STORE(p, q) \
- (*(char **)GC_is_visible(p) = GC_is_valid_displacement(q))
- # endif
- #else /* !GC_DEBUG */
- # define GC_PTR_STORE(p, q) *((p) = (q))
- #endif
-
- /* Fynctions called to report pointer checking errors */
- GC_API void (*GC_same_obj_print_proc) GC_PROTO((GC_PTR p, GC_PTR q));
-
- GC_API void (*GC_is_valid_displacement_print_proc)
- GC_PROTO((GC_PTR p));
-
- GC_API void (*GC_is_visible_print_proc)
- GC_PROTO((GC_PTR p));
-
-
- /* For pthread support, we generally need to intercept a number of */
- /* thread library calls. We do that here by macro defining them. */
-
- #if !defined(GC_USE_LD_WRAP) && \
- (defined(GC_PTHREADS) || defined(GC_SOLARIS_THREADS))
- # include "gc_pthread_redirects.h"
- #endif
-
- # if defined(PCR) || defined(GC_SOLARIS_THREADS) || \
- defined(GC_PTHREADS) || defined(GC_WIN32_THREADS)
- /* Any flavor of threads except SRC_M3. */
- /* This returns a list of objects, linked through their first */
- /* word. Its use can greatly reduce lock contention problems, since */
- /* the allocation lock can be acquired and released many fewer times. */
- /* lb must be large enough to hold the pointer field. */
- /* It is used internally by gc_local_alloc.h, which provides a simpler
*/
- /* programming interface on Linux. */
- GC_PTR GC_malloc_many(size_t lb);
- #define GC_NEXT(p) (*(GC_PTR *)(p)) /* Retrieve the next element */
- /* in returned list. */
- extern void GC_thr_init(); /* Needed for Solaris/X86 */
-
- #endif /* THREADS && !SRC_M3 */
-
- #if defined(GC_WIN32_THREADS)
- # include <windows.h>
- # include <winbase.h>
-
- /*
- * All threads must be created using GC_CreateThread, so that they will be
- * recorded in the thread table. For backwards compatibility, this is not
- * technically true if the GC is built as a dynamic library, since it can
- * and does then use DllMain to keep track of thread creations. But new
code
- * should be built to call GC_CreateThread.
- */
- HANDLE WINAPI GC_CreateThread(
- LPSECURITY_ATTRIBUTES lpThreadAttributes,
- DWORD dwStackSize, LPTHREAD_START_ROUTINE lpStartAddress,
- LPVOID lpParameter, DWORD dwCreationFlags, LPDWORD lpThreadId );
-
- # if defined(_WIN32_WCE)
- /*
- * win32_threads.c implements the real WinMain, which will start a new
thread
- * to call GC_WinMain after initializing the garbage collector.
- */
- int WINAPI GC_WinMain(
- HINSTANCE hInstance,
- HINSTANCE hPrevInstance,
- LPWSTR lpCmdLine,
- int nCmdShow );
-
- # ifndef GC_BUILD
- # define WinMain GC_WinMain
- # define CreateThread GC_CreateThread
- # endif
- # endif /* defined(_WIN32_WCE) */
-
- #endif /* defined(GC_WIN32_THREADS) */
-
- /*
- * If you are planning on putting
- * the collector in a SunOS 5 dynamic library, you need to call GC_INIT()
- * from the statically loaded program section.
- * This circumvents a Solaris 2.X (X<=4) linker bug.
- */
- #if defined(sparc) || defined(__sparc)
- # define GC_INIT() { extern end, etext; \
- GC_noop(&end, &etext); }
- #else
- # if defined(__CYGWIN32__) && defined(GC_USE_DLL) || defined (_AIX)
- /*
- * Similarly gnu-win32 DLLs need explicit initialization from
- * the main program, as does AIX.
- */
- # define GC_INIT() { GC_add_roots(DATASTART, DATAEND); }
- # else
- # define GC_INIT()
- # endif
- #endif
-
- #if !defined(_WIN32_WCE) \
- && ((defined(_MSDOS) || defined(_MSC_VER)) && (_M_IX86 >= 300) \
- || defined(_WIN32) && !defined(__CYGWIN32__) && !defined(__CYGWIN__))
- /* win32S may not free all resources on process exit. */
- /* This explicitly deallocates the heap. */
- GC_API void GC_win32_free_heap ();
- #endif
-
- #if ( defined(_AMIGA) && !defined(GC_AMIGA_MAKINGLIB) )
- /* Allocation really goes through GC_amiga_allocwrapper_do */
- # include "gc_amiga_redirects.h"
- #endif
-
- #if defined(GC_REDIRECT_TO_LOCAL) && !defined(GC_LOCAL_ALLOC_H)
- # include "gc_local_alloc.h"
- #endif
-
- #ifdef __cplusplus
- } /* end of extern "C" */
- #endif
-
- #endif /* _GC_H */
--- 0 ----
- [Emacs-diffs], (continued)
- [Emacs-diffs], Kenichi Handa, 2003/06/05
- [Emacs-diffs], Kenichi Handa, 2003/06/05
- [Emacs-diffs], Kenichi Handa, 2003/06/05
- [Emacs-diffs], Kenichi Handa, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs],
Dave Love <=
- [Emacs-diffs], Dave Love, 2003/06/06
- [Emacs-diffs], Dave Love, 2003/06/06