[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/configure
|
From: |
Andreas Schwab |
|
Subject: |
[Emacs-diffs] Changes to emacs/configure |
|
Date: |
Sat, 13 Apr 2002 21:42:18 -0400 |
Index: emacs/configure
diff -c emacs/configure:1.85 emacs/configure:1.86
*** emacs/configure:1.85 Wed Apr 10 18:14:09 2002
--- emacs/configure Sat Apr 13 21:42:18 2002
***************
*** 907,913 ****
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
--- 907,913 ----
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
***************
*** 1290,1295 ****
--- 1290,1296 ----
fi;
+
# Check whether --with-kerberos or --without-kerberos was given.
if test "${with_kerberos+set}" = set; then
withval="$with_kerberos"
***************
*** 1299,1304 ****
--- 1300,1306 ----
fi;
+
# Check whether --with-kerberos5 or --without-kerberos5 was given.
if test "${with_kerberos5+set}" = set; then
withval="$with_kerberos5"
***************
*** 1311,1316 ****
--- 1313,1319 ----
fi
fi
+
cat >>confdefs.h <<\_ACEOF
#define KERBEROS5 1
_ACEOF
***************
*** 1320,1326 ****
# Check whether --with-hesiod or --without-hesiod was given.
if test "${with_hesiod+set}" = set; then
withval="$with_hesiod"
! cat >>confdefs.h <<\_ACEOF
#define HESIOD 1
_ACEOF
--- 1323,1330 ----
# Check whether --with-hesiod or --without-hesiod was given.
if test "${with_hesiod+set}" = set; then
withval="$with_hesiod"
!
! cat >>confdefs.h <<\_ACEOF
#define HESIOD 1
_ACEOF
***************
*** 5114,5120 ****
echo "$as_me:$LINENO: result: $emacs_cv_struct_utimbuf" >&5
echo "${ECHO_T}$emacs_cv_struct_utimbuf" >&6
if test $emacs_cv_struct_utimbuf = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_STRUCT_UTIMBUF 1
_ACEOF
--- 5118,5125 ----
echo "$as_me:$LINENO: result: $emacs_cv_struct_utimbuf" >&5
echo "${ECHO_T}$emacs_cv_struct_utimbuf" >&6
if test $emacs_cv_struct_utimbuf = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_STRUCT_UTIMBUF 1
_ACEOF
***************
*** 5228,5234 ****
echo "$as_me:$LINENO: result: $emacs_cv_speed_t" >&5
echo "${ECHO_T}$emacs_cv_speed_t" >&6
if test $emacs_cv_speed_t = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_SPEED_T 1
_ACEOF
--- 5233,5240 ----
echo "$as_me:$LINENO: result: $emacs_cv_speed_t" >&5
echo "${ECHO_T}$emacs_cv_speed_t" >&6
if test $emacs_cv_speed_t = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_SPEED_T 1
_ACEOF
***************
*** 5290,5296 ****
echo "${ECHO_T}$emacs_cv_struct_timeval" >&6
HAVE_TIMEVAL=$emacs_cv_struct_timeval
if test $emacs_cv_struct_timeval = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TIMEVAL 1
_ACEOF
--- 5296,5303 ----
echo "${ECHO_T}$emacs_cv_struct_timeval" >&6
HAVE_TIMEVAL=$emacs_cv_struct_timeval
if test $emacs_cv_struct_timeval = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TIMEVAL 1
_ACEOF
***************
*** 5343,5349 ****
echo "${ECHO_T}$emacs_cv_struct_exception" >&6
HAVE_EXCEPTION=$emacs_cv_struct_exception
if test $emacs_cv_struct_exception != yes; then
! cat >>confdefs.h <<\_ACEOF
#define NO_MATHERR 1
_ACEOF
--- 5350,5357 ----
echo "${ECHO_T}$emacs_cv_struct_exception" >&6
HAVE_EXCEPTION=$emacs_cv_struct_exception
if test $emacs_cv_struct_exception != yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define NO_MATHERR 1
_ACEOF
***************
*** 5528,5542 ****
fi
fi
! echo "$as_me:$LINENO: checking for tm_gmtoff in struct tm" >&5
! echo $ECHO_N "checking for tm_gmtoff in struct tm... $ECHO_C" >&6
! if test "${emacs_cv_tm_gmtoff+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
#include <time.h>
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
--- 5536,5551 ----
fi
fi
! echo "$as_me:$LINENO: checking for struct tm.tm_gmtoff" >&5
! echo $ECHO_N "checking for struct tm.tm_gmtoff... $ECHO_C" >&6
! if test "${ac_cv_member_struct_tm_tm_gmtoff+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
#include <time.h>
+
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
***************
*** 5546,5586 ****
int
main ()
{
! struct tm t; t.tm_gmtoff = 0
;
return 0;
}
_ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
! emacs_cv_tm_gmtoff=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
! emacs_cv_tm_gmtoff=no
fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
! echo "$as_me:$LINENO: result: $emacs_cv_tm_gmtoff" >&5
! echo "${ECHO_T}$emacs_cv_tm_gmtoff" >&6
! if test $emacs_cv_tm_gmtoff = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TM_GMTOFF 1
_ACEOF
fi
echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
if test "${ac_cv_prog_cc_stdc+set}" = set; then
--- 5555,5599 ----
int
main ()
{
! static struct tm ac_aggr;
! if (ac_aggr.tm_gmtoff)
! return 0;
;
return 0;
}
_ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
! ac_cv_member_struct_tm_tm_gmtoff=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
! ac_cv_member_struct_tm_tm_gmtoff=no
fi
! rm -f conftest.$ac_objext conftest.$ac_ext
fi
! echo "$as_me:$LINENO: result: $ac_cv_member_struct_tm_tm_gmtoff" >&5
! echo "${ECHO_T}$ac_cv_member_struct_tm_tm_gmtoff" >&6
! if test $ac_cv_member_struct_tm_tm_gmtoff = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TM_GMTOFF 1
_ACEOF
fi
+
echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
if test "${ac_cv_prog_cc_stdc+set}" = set; then
***************
*** 5909,5914 ****
--- 5922,5928 ----
fi
+
echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
***************
*** 6001,6008 ****
if test "$gamedir" = "yes"; then
gamedir="${localstatedir}/games/emacs"
fi
! tgamedir=`eval "echo $gamedir"`
! cat >>confdefs.h <<_ACEOF
#define HAVE_SHARED_GAME_DIR "$tgamedir"
_ACEOF
--- 6015,6023 ----
if test "$gamedir" = "yes"; then
gamedir="${localstatedir}/games/emacs"
fi
! eval tgamedir=\"$gamedir\"
!
! cat >>confdefs.h <<_ACEOF
#define HAVE_SHARED_GAME_DIR "$tgamedir"
_ACEOF
***************
*** 6526,6532 ****
GNU_MALLOC_reason="
(Using Doug Lea's new malloc from the GNU C Library.)"
fi
! cat >>confdefs.h <<\_ACEOF
#define DOUG_LEA_MALLOC 1
_ACEOF
--- 6541,6548 ----
GNU_MALLOC_reason="
(Using Doug Lea's new malloc from the GNU C Library.)"
fi
!
! cat >>confdefs.h <<\_ACEOF
#define DOUG_LEA_MALLOC 1
_ACEOF
***************
*** 7273,7279 ****
echo "$as_me:$LINENO: result: $emacs_xkb" >&5
echo "${ECHO_T}$emacs_xkb" >&6
if test $emacs_xkb = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XKBGETKEYBOARD 1
_ACEOF
--- 7289,7296 ----
echo "$as_me:$LINENO: result: $emacs_xkb" >&5
echo "${ECHO_T}$emacs_xkb" >&6
if test $emacs_xkb = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XKBGETKEYBOARD 1
_ACEOF
***************
*** 7412,7418 ****
if test $emacs_cv_x11_version_6 = yes; then
echo "$as_me:$LINENO: result: 6 or newer" >&5
echo "${ECHO_T}6 or newer" >&6
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11R6 1
_ACEOF
--- 7429,7436 ----
if test $emacs_cv_x11_version_6 = yes; then
echo "$as_me:$LINENO: result: 6 or newer" >&5
echo "${ECHO_T}6 or newer" >&6
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11R6 1
_ACEOF
***************
*** 7474,7480 ****
echo "$as_me:$LINENO: result: 5 or newer" >&5
echo "${ECHO_T}5 or newer" >&6
HAVE_X11R5=yes
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11R5 1
_ACEOF
--- 7492,7499 ----
echo "$as_me:$LINENO: result: 5 or newer" >&5
echo "${ECHO_T}5 or newer" >&6
HAVE_X11R5=yes
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11R5 1
_ACEOF
***************
*** 7601,7607 ****
if test $emacs_cv_x11_toolkit_version_6 = yes; then
echo "$as_me:$LINENO: result: 6 or newer" >&5
echo "${ECHO_T}6 or newer" >&6
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11XTR6 1
_ACEOF
--- 7620,7627 ----
if test $emacs_cv_x11_toolkit_version_6 = yes; then
echo "$as_me:$LINENO: result: 6 or newer" >&5
echo "${ECHO_T}6 or newer" >&6
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11XTR6 1
_ACEOF
***************
*** 7808,7814 ****
HAVE_MOTIF_2_1=$emacs_cv_motif_version_2_1
if test $emacs_cv_motif_version_2_1 = yes; then
HAVE_LIBXP=no
! cat >>confdefs.h <<\_ACEOF
#define HAVE_MOTIF_2_1 1
_ACEOF
--- 7828,7835 ----
HAVE_MOTIF_2_1=$emacs_cv_motif_version_2_1
if test $emacs_cv_motif_version_2_1 = yes; then
HAVE_LIBXP=no
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_MOTIF_2_1 1
_ACEOF
***************
*** 7872,7878 ****
fi
if test ${HAVE_LIBXP} = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBXP 1
_ACEOF
--- 7893,7900 ----
fi
if test ${HAVE_LIBXP} = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBXP 1
_ACEOF
***************
*** 8049,8055 ****
if test "${HAVE_XAW3D}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XAW3D 1
_ACEOF
--- 8071,8078 ----
if test "${HAVE_XAW3D}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XAW3D 1
_ACEOF
***************
*** 8058,8063 ****
--- 8081,8087 ----
fi
+
USE_TOOLKIT_SCROLL_BARS=no
if test "${with_toolkit_scroll_bars}" != "no"; then
if test "${USE_X_TOOLKIT}" != "none"; then
***************
*** 8080,8086 ****
if test "${with_xim}" != "no"; then
! cat >>confdefs.h <<\_ACEOF
#define USE_XIM 1
_ACEOF
--- 8104,8111 ----
if test "${with_xim}" != "no"; then
!
! cat >>confdefs.h <<\_ACEOF
#define USE_XIM 1
_ACEOF
***************
*** 8286,8292 ****
fi
if test "${HAVE_XPM}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XPM 1
_ACEOF
--- 8311,8318 ----
fi
if test "${HAVE_XPM}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XPM 1
_ACEOF
***************
*** 8463,8468 ****
--- 8489,8495 ----
fi
+
if test "${HAVE_JPEG}" = "yes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_JPEG 1
***************
*** 8662,8668 ****
fi
if test "${HAVE_PNG}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_PNG 1
_ACEOF
--- 8689,8696 ----
fi
if test "${HAVE_PNG}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_PNG 1
_ACEOF
***************
*** 8843,8849 ****
fi
if test "${HAVE_TIFF}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TIFF 1
_ACEOF
--- 8871,8878 ----
fi
if test "${HAVE_TIFF}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_TIFF 1
_ACEOF
***************
*** 9023,9029 ****
fi
if test "${HAVE_GIF}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_GIF 1
_ACEOF
--- 9052,9059 ----
fi
if test "${HAVE_GIF}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_GIF 1
_ACEOF
***************
*** 9201,9207 ****
if test "${HAVE_X_SM}" = "yes"; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X_SM 1
_ACEOF
--- 9231,9238 ----
if test "${HAVE_X_SM}" = "yes"; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X_SM 1
_ACEOF
***************
*** 9259,9265 ****
echo "$as_me:$LINENO: result: $emacs_cv_netdb_declares_h_errno" >&5
echo "${ECHO_T}$emacs_cv_netdb_declares_h_errno" >&6
if test $emacs_cv_netdb_declares_h_errno = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_H_ERRNO 1
_ACEOF
--- 9290,9297 ----
echo "$as_me:$LINENO: result: $emacs_cv_netdb_declares_h_errno" >&5
echo "${ECHO_T}$emacs_cv_netdb_declares_h_errno" >&6
if test $emacs_cv_netdb_declares_h_errno = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_H_ERRNO 1
_ACEOF
***************
*** 9788,9794 ****
ac_cv_prog_liblockfile="$liblockfile" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
! for as_dir in /usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
--- 9820,9827 ----
ac_cv_prog_liblockfile="$liblockfile" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
! as_dummy="/usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH"
! for as_dir in $as_dummy
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
***************
*** 9821,9827 ****
This probably means that movemail could lose mail.
There may be a \`development' package to install containing liblockfile."
>&2;}
{ (exit 1); exit 1; }; }
! else cat >>confdefs.h <<\_ACEOF
#define LIBMAIL -llockfile
_ACEOF
--- 9854,9861 ----
This probably means that movemail could lose mail.
There may be a \`development' package to install containing liblockfile."
>&2;}
{ (exit 1); exit 1; }; }
! else
! cat >>confdefs.h <<\_ACEOF
#define LIBMAIL -llockfile
_ACEOF
***************
*** 10649,10655 ****
fi
if test "$ac_cv_func_working_mktime" = no; then
! cat >>confdefs.h <<\_ACEOF
#define BROKEN_MKTIME 1
_ACEOF
--- 10683,10690 ----
fi
if test "$ac_cv_func_working_mktime" = no; then
!
! cat >>confdefs.h <<\_ACEOF
#define BROKEN_MKTIME 1
_ACEOF
***************
*** 12177,12207 ****
! ac_have_func=no # yes means we've found a way to get the load average.
!
! ac_save_LIBS=$LIBS
!
! # Check for getloadavg, but be sure not to touch the cache variable.
! (echo "$as_me:$LINENO: checking for getloadavg" >&5
! echo $ECHO_N "checking for getloadavg... $ECHO_C" >&6
! if test "${ac_cv_func_getloadavg+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
! /* System header to define __stub macros and hopefully few prototypes,
! which can conflict with char getloadavg (); below. */
! #include <assert.h>
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char getloadavg ();
! char (*f) ();
!
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
--- 12212,12228 ----
! echo "$as_me:$LINENO: checking for _LARGEFILE_SOURCE value needed for large
files" >&5
! echo $ECHO_N "checking for _LARGEFILE_SOURCE value needed for large files...
$ECHO_C" >&6
! if test "${ac_cv_sys_largefile_source+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
+ while :; do
+ ac_cv_sys_largefile_source=no
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
! #include <stdio.h>
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
***************
*** 12211,12225 ****
int
main ()
{
! /* The GNU C library defines this for functions which it implements
! to always fail with ENOSYS. Some functions are actually named
! something starting with __ and the normal name is an alias. */
! #if defined (__stub_getloadavg) || defined (__stub___getloadavg)
! choke me
! #else
! f = getloadavg;
#endif
;
return 0;
}
--- 12232,12333 ----
int
main ()
{
! return !fseeko;
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! break
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #define _LARGEFILE_SOURCE 1
! #include <stdio.h>
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
#endif
+ int
+ main ()
+ {
+ return !fseeko;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sys_largefile_source=1; break
+ else
+ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest.$ac_objext conftest.$ac_ext
+ break
+ done
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_source" >&5
+ echo "${ECHO_T}$ac_cv_sys_largefile_source" >&6
+ if test "$ac_cv_sys_largefile_source" != no; then
+
+ cat >>confdefs.h <<_ACEOF
+ #define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
+ _ACEOF
+
+ fi
+ rm -f conftest*
+ # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
+ # in glibc 2.1.3, but that breaks too many other things.
+ # If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
+ echo "$as_me:$LINENO: checking for fseeko" >&5
+ echo $ECHO_N "checking for fseeko... $ECHO_C" >&6
+ if test "${ac_cv_func_fseeko+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+ #line $LINENO "configure"
+ #include "confdefs.h"
+ #include <stdio.h>
+ #ifdef F77_DUMMY_MAIN
+ # ifdef __cplusplus
+ extern "C"
+ # endif
+ int F77_DUMMY_MAIN() { return 1; }
+ #endif
+ int
+ main ()
+ {
+ return fseeko && fseeko (stdin, 0, 0);
;
return 0;
}
***************
*** 12236,12261 ****
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
! ac_cv_func_getloadavg=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
! ac_cv_func_getloadavg=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
! echo "$as_me:$LINENO: result: $ac_cv_func_getloadavg" >&5
! echo "${ECHO_T}$ac_cv_func_getloadavg" >&6
! if test $ac_cv_func_getloadavg = yes; then
! exit 0
! else
! exit 1
fi
- ) && ac_have_func=yes
- # On HPUX9, an unprivileged user can get load averages through this function.
! for ac_func in pstat_getdynamic
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_func" >&5
--- 12344,12371 ----
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
! ac_cv_func_fseeko=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
! ac_cv_func_fseeko=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
! echo "$as_me:$LINENO: result: $ac_cv_func_fseeko" >&5
! echo "${ECHO_T}$ac_cv_func_fseeko" >&6
! if test $ac_cv_func_fseeko = yes; then
!
! cat >>confdefs.h <<\_ACEOF
! #define HAVE_FSEEKO 1
! _ACEOF
!
fi
! # UNIX98 PTYs.
!
! for ac_func in grantpt
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_func" >&5
***************
*** 12331,13944 ****
done
! # Solaris has libkstat which does not require root.
! echo "$as_me:$LINENO: checking for kstat_open in -lkstat" >&5
! echo $ECHO_N "checking for kstat_open in -lkstat... $ECHO_C" >&6
! if test "${ac_cv_lib_kstat_kstat_open+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-lkstat $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char kstat_open ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! kstat_open ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_kstat_kstat_open=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_kstat_kstat_open=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_kstat_kstat_open" >&5
! echo "${ECHO_T}$ac_cv_lib_kstat_kstat_open" >&6
! if test $ac_cv_lib_kstat_kstat_open = yes; then
! cat >>confdefs.h <<_ACEOF
! #define HAVE_LIBKSTAT 1
! _ACEOF
!
! LIBS="-lkstat $LIBS"
!
! fi
!
! test $ac_cv_lib_kstat_kstat_open = yes && ac_have_func=yes
!
! # Some systems with -lutil have (and need) -lkvm as well, some do not.
! # On Solaris, -lkvm requires nlist from -lelf, so check that first
! # to get the right answer into the cache.
! # For kstat on solaris, we need libelf to force the definition of SVR4 below.
! if test $ac_have_func = no; then
! echo "$as_me:$LINENO: checking for elf_begin in -lelf" >&5
! echo $ECHO_N "checking for elf_begin in -lelf... $ECHO_C" >&6
! if test "${ac_cv_lib_elf_elf_begin+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-lelf $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char elf_begin ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! elf_begin ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_elf_elf_begin=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_elf_elf_begin=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_elf_elf_begin" >&5
! echo "${ECHO_T}$ac_cv_lib_elf_elf_begin" >&6
! if test $ac_cv_lib_elf_elf_begin = yes; then
! LIBS="-lelf $LIBS"
! fi
!
! fi
! if test $ac_have_func = no; then
! echo "$as_me:$LINENO: checking for kvm_open in -lkvm" >&5
! echo $ECHO_N "checking for kvm_open in -lkvm... $ECHO_C" >&6
! if test "${ac_cv_lib_kvm_kvm_open+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-lkvm $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char kvm_open ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! kvm_open ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_kvm_kvm_open=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_kvm_kvm_open=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_kvm_kvm_open" >&5
! echo "${ECHO_T}$ac_cv_lib_kvm_kvm_open" >&6
! if test $ac_cv_lib_kvm_kvm_open = yes; then
! LIBS="-lkvm $LIBS"
! fi
!
! # Check for the 4.4BSD definition of getloadavg.
! echo "$as_me:$LINENO: checking for getloadavg in -lutil" >&5
! echo $ECHO_N "checking for getloadavg in -lutil... $ECHO_C" >&6
! if test "${ac_cv_lib_util_getloadavg+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-lutil $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char getloadavg ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! getloadavg ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_util_getloadavg=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_util_getloadavg=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_util_getloadavg" >&5
! echo "${ECHO_T}$ac_cv_lib_util_getloadavg" >&6
! if test $ac_cv_lib_util_getloadavg = yes; then
! LIBS="-lutil $LIBS" ac_have_func=yes ac_cv_func_getloadavg_setgid=yes
! fi
!
! fi
!
! if test $ac_have_func = no; then
! # There is a commonly available library for RS/6000 AIX.
! # Since it is not a standard part of AIX, it might be installed locally.
! ac_getloadavg_LIBS=$LIBS
! LIBS="-L/usr/local/lib $LIBS"
! echo "$as_me:$LINENO: checking for getloadavg in -lgetloadavg" >&5
! echo $ECHO_N "checking for getloadavg in -lgetloadavg... $ECHO_C" >&6
! if test "${ac_cv_lib_getloadavg_getloadavg+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-lgetloadavg $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char getloadavg ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! getloadavg ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_getloadavg_getloadavg=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_getloadavg_getloadavg=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_getloadavg_getloadavg" >&5
! echo "${ECHO_T}$ac_cv_lib_getloadavg_getloadavg" >&6
! if test $ac_cv_lib_getloadavg_getloadavg = yes; then
! LIBS="-lgetloadavg $LIBS"
! else
! LIBS=$ac_getloadavg_LIBS
! fi
!
! fi
!
! # Make sure it is really in the library, if we think we found it,
! # otherwise set up the replacement function.
!
! for ac_func in getloadavg
! do
! as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
! echo "$as_me:$LINENO: checking for $ac_func" >&5
! echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
! if eval "test \"\${$as_ac_var+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! /* System header to define __stub macros and hopefully few prototypes,
! which can conflict with char $ac_func (); below. */
! #include <assert.h>
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char $ac_func ();
! char (*f) ();
!
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! /* The GNU C library defines this for functions which it implements
! to always fail with ENOSYS. Some functions are actually named
! something starting with __ and the normal name is an alias. */
! #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
! choke me
! #else
! f = $ac_func;
! #endif
!
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! eval "$as_ac_var=yes"
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! eval "$as_ac_var=no"
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
! if test `eval echo '${'$as_ac_var'}'` = yes; then
! cat >>confdefs.h <<_ACEOF
! #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
! _ACEOF
!
! else
! LIBOBJS="$LIBOBJS getloadavg.$ac_objext"
!
! cat >>confdefs.h <<\_ACEOF
! #define C_GETLOADAVG 1
! _ACEOF
!
! # Figure out what our getloadavg.c needs.
! ac_have_func=no
! if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
! echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
! echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6
! if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
! echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking sys/dg_sys_info.h usability" >&5
! echo $ECHO_N "checking sys/dg_sys_info.h usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <sys/dg_sys_info.h>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking sys/dg_sys_info.h presence" >&5
! echo $ECHO_N "checking sys/dg_sys_info.h presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <sys/dg_sys_info.h>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: accepted by the
compiler, rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: sys/dg_sys_info.h: accepted by the compiler, rejected
by the preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's
result" >&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: present but cannot be
compiled" >&5
! echo "$as_me: WARNING: sys/dg_sys_info.h: present but cannot be compiled"
>&2;}
! { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: check for missing
prerequisite headers?" >&5
! echo "$as_me: WARNING: sys/dg_sys_info.h: check for missing prerequisite
headers?" >&2;}
! { echo "$as_me:$LINENO: WARNING: sys/dg_sys_info.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: sys/dg_sys_info.h: proceeding with the preprocessor's
result" >&2;};;
! esac
! echo "$as_me:$LINENO: checking for sys/dg_sys_info.h" >&5
! echo $ECHO_N "checking for sys/dg_sys_info.h... $ECHO_C" >&6
! if test "${ac_cv_header_sys_dg_sys_info_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_cv_header_sys_dg_sys_info_h=$ac_header_preproc
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_sys_dg_sys_info_h" >&5
! echo "${ECHO_T}$ac_cv_header_sys_dg_sys_info_h" >&6
!
! fi
! if test $ac_cv_header_sys_dg_sys_info_h = yes; then
! ac_have_func=yes
!
! cat >>confdefs.h <<\_ACEOF
! #define DGUX 1
! _ACEOF
!
!
! echo "$as_me:$LINENO: checking for dg_sys_info in -ldgc" >&5
! echo $ECHO_N "checking for dg_sys_info in -ldgc... $ECHO_C" >&6
! if test "${ac_cv_lib_dgc_dg_sys_info+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_check_lib_save_LIBS=$LIBS
! LIBS="-ldgc $LIBS"
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
!
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char dg_sys_info ();
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! dg_sys_info ();
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_lib_dgc_dg_sys_info=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_lib_dgc_dg_sys_info=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! LIBS=$ac_check_lib_save_LIBS
! fi
! echo "$as_me:$LINENO: result: $ac_cv_lib_dgc_dg_sys_info" >&5
! echo "${ECHO_T}$ac_cv_lib_dgc_dg_sys_info" >&6
! if test $ac_cv_lib_dgc_dg_sys_info = yes; then
! cat >>confdefs.h <<_ACEOF
! #define HAVE_LIBDGC 1
! _ACEOF
!
! LIBS="-ldgc $LIBS"
!
! fi
!
! fi
!
!
!
! if test "${ac_cv_header_locale_h+set}" = set; then
! echo "$as_me:$LINENO: checking for locale.h" >&5
! echo $ECHO_N "checking for locale.h... $ECHO_C" >&6
! if test "${ac_cv_header_locale_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_locale_h" >&5
! echo "${ECHO_T}$ac_cv_header_locale_h" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking locale.h usability" >&5
! echo $ECHO_N "checking locale.h usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <locale.h>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking locale.h presence" >&5
! echo $ECHO_N "checking locale.h presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <locale.h>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: locale.h: accepted by the compiler,
rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: locale.h: accepted by the compiler, rejected by the
preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: locale.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: locale.h: proceeding with the preprocessor's result"
>&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: locale.h: present but cannot be
compiled" >&5
! echo "$as_me: WARNING: locale.h: present but cannot be compiled" >&2;}
! { echo "$as_me:$LINENO: WARNING: locale.h: check for missing prerequisite
headers?" >&5
! echo "$as_me: WARNING: locale.h: check for missing prerequisite headers?"
>&2;}
! { echo "$as_me:$LINENO: WARNING: locale.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: locale.h: proceeding with the preprocessor's result"
>&2;};;
! esac
! echo "$as_me:$LINENO: checking for locale.h" >&5
! echo $ECHO_N "checking for locale.h... $ECHO_C" >&6
! if test "${ac_cv_header_locale_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_cv_header_locale_h=$ac_header_preproc
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_locale_h" >&5
! echo "${ECHO_T}$ac_cv_header_locale_h" >&6
!
! fi
!
!
!
! for ac_func in setlocale
! do
! as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
! echo "$as_me:$LINENO: checking for $ac_func" >&5
! echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
! if eval "test \"\${$as_ac_var+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! /* System header to define __stub macros and hopefully few prototypes,
! which can conflict with char $ac_func (); below. */
! #include <assert.h>
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char $ac_func ();
! char (*f) ();
!
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! /* The GNU C library defines this for functions which it implements
! to always fail with ENOSYS. Some functions are actually named
! something starting with __ and the normal name is an alias. */
! #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
! choke me
! #else
! f = $ac_func;
! #endif
!
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! eval "$as_ac_var=yes"
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! eval "$as_ac_var=no"
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
! if test `eval echo '${'$as_ac_var'}'` = yes; then
! cat >>confdefs.h <<_ACEOF
! #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
! _ACEOF
!
! fi
! done
!
!
! # We cannot check for <dwarf.h>, because Solaris 2 does not use dwarf (it
! # uses stabs), but it is still SVR4. We cannot check for <elf.h> because
! # Irix 4.0.5F has the header but not the library.
! if test $ac_have_func = no && test "$ac_cv_lib_elf_elf_begin" = yes; then
! ac_have_func=yes
!
! cat >>confdefs.h <<\_ACEOF
! #define SVR4 1
! _ACEOF
!
! fi
!
! if test $ac_have_func = no; then
! if test "${ac_cv_header_inq_stats_cpustats_h+set}" = set; then
! echo "$as_me:$LINENO: checking for inq_stats/cpustats.h" >&5
! echo $ECHO_N "checking for inq_stats/cpustats.h... $ECHO_C" >&6
! if test "${ac_cv_header_inq_stats_cpustats_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_inq_stats_cpustats_h" >&5
! echo "${ECHO_T}$ac_cv_header_inq_stats_cpustats_h" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking inq_stats/cpustats.h usability" >&5
! echo $ECHO_N "checking inq_stats/cpustats.h usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <inq_stats/cpustats.h>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking inq_stats/cpustats.h presence" >&5
! echo $ECHO_N "checking inq_stats/cpustats.h presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <inq_stats/cpustats.h>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: inq_stats/cpustats.h: accepted by the
compiler, rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: inq_stats/cpustats.h: accepted by the compiler,
rejected by the preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: inq_stats/cpustats.h: proceeding with
the preprocessor's result" >&5
! echo "$as_me: WARNING: inq_stats/cpustats.h: proceeding with the
preprocessor's result" >&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: inq_stats/cpustats.h: present but cannot
be compiled" >&5
! echo "$as_me: WARNING: inq_stats/cpustats.h: present but cannot be compiled"
>&2;}
! { echo "$as_me:$LINENO: WARNING: inq_stats/cpustats.h: check for missing
prerequisite headers?" >&5
! echo "$as_me: WARNING: inq_stats/cpustats.h: check for missing prerequisite
headers?" >&2;}
! { echo "$as_me:$LINENO: WARNING: inq_stats/cpustats.h: proceeding with
the preprocessor's result" >&5
! echo "$as_me: WARNING: inq_stats/cpustats.h: proceeding with the
preprocessor's result" >&2;};;
! esac
! echo "$as_me:$LINENO: checking for inq_stats/cpustats.h" >&5
! echo $ECHO_N "checking for inq_stats/cpustats.h... $ECHO_C" >&6
! if test "${ac_cv_header_inq_stats_cpustats_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_cv_header_inq_stats_cpustats_h=$ac_header_preproc
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_inq_stats_cpustats_h" >&5
! echo "${ECHO_T}$ac_cv_header_inq_stats_cpustats_h" >&6
!
! fi
! if test $ac_cv_header_inq_stats_cpustats_h = yes; then
! ac_have_func=yes
!
! cat >>confdefs.h <<\_ACEOF
! #define UMAX 1
! _ACEOF
!
!
! cat >>confdefs.h <<\_ACEOF
! #define UMAX4_3 1
! _ACEOF
!
! fi
!
!
! fi
!
! if test $ac_have_func = no; then
! if test "${ac_cv_header_sys_cpustats_h+set}" = set; then
! echo "$as_me:$LINENO: checking for sys/cpustats.h" >&5
! echo $ECHO_N "checking for sys/cpustats.h... $ECHO_C" >&6
! if test "${ac_cv_header_sys_cpustats_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_sys_cpustats_h" >&5
! echo "${ECHO_T}$ac_cv_header_sys_cpustats_h" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking sys/cpustats.h usability" >&5
! echo $ECHO_N "checking sys/cpustats.h usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <sys/cpustats.h>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking sys/cpustats.h presence" >&5
! echo $ECHO_N "checking sys/cpustats.h presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <sys/cpustats.h>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: sys/cpustats.h: accepted by the
compiler, rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: sys/cpustats.h: accepted by the compiler, rejected by
the preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: sys/cpustats.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: sys/cpustats.h: proceeding with the preprocessor's
result" >&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: sys/cpustats.h: present but cannot be
compiled" >&5
! echo "$as_me: WARNING: sys/cpustats.h: present but cannot be compiled" >&2;}
! { echo "$as_me:$LINENO: WARNING: sys/cpustats.h: check for missing
prerequisite headers?" >&5
! echo "$as_me: WARNING: sys/cpustats.h: check for missing prerequisite
headers?" >&2;}
! { echo "$as_me:$LINENO: WARNING: sys/cpustats.h: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: sys/cpustats.h: proceeding with the preprocessor's
result" >&2;};;
! esac
! echo "$as_me:$LINENO: checking for sys/cpustats.h" >&5
! echo $ECHO_N "checking for sys/cpustats.h... $ECHO_C" >&6
! if test "${ac_cv_header_sys_cpustats_h+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! ac_cv_header_sys_cpustats_h=$ac_header_preproc
! fi
! echo "$as_me:$LINENO: result: $ac_cv_header_sys_cpustats_h" >&5
! echo "${ECHO_T}$ac_cv_header_sys_cpustats_h" >&6
!
! fi
! if test $ac_cv_header_sys_cpustats_h = yes; then
! ac_have_func=yes; cat >>confdefs.h <<\_ACEOF
! #define UMAX 1
! _ACEOF
!
! fi
!
!
! fi
!
! if test $ac_have_func = no; then
!
! for ac_header in mach/mach.h
! do
! as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo "$as_me:$LINENO: checking for $ac_header" >&5
! echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking $ac_header usability" >&5
! echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <$ac_header>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking $ac_header presence" >&5
! echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <$ac_header>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler,
rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the
preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result"
>&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be
compiled" >&5
! echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing
prerequisite headers?" >&5
! echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?"
>&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result"
>&2;};;
! esac
! echo "$as_me:$LINENO: checking for $ac_header" >&5
! echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! eval "$as_ac_Header=$ac_header_preproc"
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
!
! fi
! if test `eval echo '${'$as_ac_Header'}'` = yes; then
! cat >>confdefs.h <<_ACEOF
! #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
! _ACEOF
!
! fi
!
! done
!
! fi
!
!
! for ac_header in nlist.h
! do
! as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo "$as_me:$LINENO: checking for $ac_header" >&5
! echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
! else
! # Is the header compilable?
! echo "$as_me:$LINENO: checking $ac_header usability" >&5
! echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! $ac_includes_default
! #include <$ac_header>
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_header_compiler=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_compiler=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
! echo "${ECHO_T}$ac_header_compiler" >&6
!
! # Is the header present?
! echo "$as_me:$LINENO: checking $ac_header presence" >&5
! echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <$ac_header>
! _ACEOF
! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
! ac_status=$?
! egrep -v '^ *\+' conftest.er1 >conftest.err
! rm -f conftest.er1
! cat conftest.err >&5
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } >/dev/null; then
! if test -s conftest.err; then
! ac_cpp_err=$ac_c_preproc_warn_flag
! else
! ac_cpp_err=
! fi
! else
! ac_cpp_err=yes
! fi
! if test -z "$ac_cpp_err"; then
! ac_header_preproc=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_header_preproc=no
! fi
! rm -f conftest.err conftest.$ac_ext
! echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
! echo "${ECHO_T}$ac_header_preproc" >&6
!
! # So? What about this header?
! case $ac_header_compiler:$ac_header_preproc in
! yes:no )
! { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler,
rejected by the preprocessor!" >&5
! echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the
preprocessor!" >&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result"
>&2;};;
! no:yes )
! { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be
compiled" >&5
! echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing
prerequisite headers?" >&5
! echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?"
>&2;}
! { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the
preprocessor's result" >&5
! echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result"
>&2;};;
! esac
! echo "$as_me:$LINENO: checking for $ac_header" >&5
! echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
! if eval "test \"\${$as_ac_Header+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! eval "$as_ac_Header=$ac_header_preproc"
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
!
! fi
! if test `eval echo '${'$as_ac_Header'}'` = yes; then
! cat >>confdefs.h <<_ACEOF
! #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
! _ACEOF
! echo "$as_me:$LINENO: checking for struct nlist.n_un.n_name" >&5
! echo $ECHO_N "checking for struct nlist.n_un.n_name... $ECHO_C" >&6
! if test "${ac_cv_member_struct_nlist_n_un_n_name+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <nlist.h>
!
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! static struct nlist ac_aggr;
! if (ac_aggr.n_un.n_name)
! return 0;
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_member_struct_nlist_n_un_n_name=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_member_struct_nlist_n_un_n_name=no
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! fi
! echo "$as_me:$LINENO: result: $ac_cv_member_struct_nlist_n_un_n_name" >&5
! echo "${ECHO_T}$ac_cv_member_struct_nlist_n_un_n_name" >&6
! if test $ac_cv_member_struct_nlist_n_un_n_name = yes; then
!
! cat >>confdefs.h <<_ACEOF
! #define HAVE_STRUCT_NLIST_N_UN_N_NAME 1
! _ACEOF
!
!
! cat >>confdefs.h <<\_ACEOF
! #define NLIST_NAME_UNION 1
! _ACEOF
!
! fi
!
!
! fi
!
! done
!
! fi
! done
!
!
! # Some definitions of getloadavg require that the program be installed setgid.
! echo "$as_me:$LINENO: checking whether getloadavg requires setgid" >&5
! echo $ECHO_N "checking whether getloadavg requires setgid... $ECHO_C" >&6
! if test "${ac_cv_func_getloadavg_setgid+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include "$srcdir/getloadavg.c"
! #ifdef LDAV_PRIVILEGED
! Yowza Am I SETGID yet
! #endif
! _ACEOF
! if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
! egrep "Yowza Am I SETGID yet" >/dev/null 2>&1; then
! ac_cv_func_getloadavg_setgid=yes
! else
! ac_cv_func_getloadavg_setgid=no
! fi
! rm -f conftest*
!
! fi
! echo "$as_me:$LINENO: result: $ac_cv_func_getloadavg_setgid" >&5
! echo "${ECHO_T}$ac_cv_func_getloadavg_setgid" >&6
! if test $ac_cv_func_getloadavg_setgid = yes; then
! NEED_SETGID=true
!
! cat >>confdefs.h <<\_ACEOF
! #define GETLOADAVG_PRIVILEGED 1
! _ACEOF
!
! else
! NEED_SETGID=false
! fi
!
! if test $ac_cv_func_getloadavg_setgid = yes; then
! echo "$as_me:$LINENO: checking group of /dev/kmem" >&5
! echo $ECHO_N "checking group of /dev/kmem... $ECHO_C" >&6
! if test "${ac_cv_group_kmem+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! # On Solaris, /dev/kmem is a symlink. Get info on the real file.
! ac_ls_output=`ls -lgL /dev/kmem 2>/dev/null`
! # If we got an error (system does not support symlinks), try without -L.
! test -z "$ac_ls_output" && ac_ls_output=`ls -lg /dev/kmem`
! ac_cv_group_kmem=`echo $ac_ls_output \
! | sed -ne 's/[ ][ ]*/ /g;
! s/^.[sSrwx-]* *[0-9]* *\([^0-9]*\) *.*/\1/;
! / /s/.* //;p;'`
!
! fi
! echo "$as_me:$LINENO: result: $ac_cv_group_kmem" >&5
! echo "${ECHO_T}$ac_cv_group_kmem" >&6
! KMEM_GROUP=$ac_cv_group_kmem
! fi
! if test "x$ac_save_LIBS" = x; then
! GETLOADAVG_LIBS=$LIBS
! else
! GETLOADAVG_LIBS=`echo "$LIBS" | sed "s!$ac_save_LIBS!!"`
! fi
! LIBS=$ac_save_LIBS
!
!
!
! echo "$as_me:$LINENO: checking for _LARGEFILE_SOURCE value needed for large
files" >&5
! echo $ECHO_N "checking for _LARGEFILE_SOURCE value needed for large files...
$ECHO_C" >&6
! if test "${ac_cv_sys_largefile_source+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! while :; do
! ac_cv_sys_largefile_source=no
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <stdio.h>
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! return !fseeko;
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! break
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #define _LARGEFILE_SOURCE 1
! #include <stdio.h>
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! return !fseeko;
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext
! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
! (eval $ac_compile) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest.$ac_objext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_sys_largefile_source=1; break
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! fi
! rm -f conftest.$ac_objext conftest.$ac_ext
! break
! done
! fi
! echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_source" >&5
! echo "${ECHO_T}$ac_cv_sys_largefile_source" >&6
! if test "$ac_cv_sys_largefile_source" != no; then
!
! cat >>confdefs.h <<_ACEOF
! #define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
! _ACEOF
!
! fi
! rm -f conftest*
!
! # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
! # in glibc 2.1.3, but that breaks too many other things.
! # If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
! echo "$as_me:$LINENO: checking for fseeko" >&5
! echo $ECHO_N "checking for fseeko... $ECHO_C" >&6
! if test "${ac_cv_func_fseeko+set}" = set; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! #include <stdio.h>
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! return fseeko && fseeko (stdin, 0, 0);
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! ac_cv_func_fseeko=yes
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! ac_cv_func_fseeko=no
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! fi
! echo "$as_me:$LINENO: result: $ac_cv_func_fseeko" >&5
! echo "${ECHO_T}$ac_cv_func_fseeko" >&6
! if test $ac_cv_func_fseeko = yes; then
!
! cat >>confdefs.h <<\_ACEOF
! #define HAVE_FSEEKO 1
! _ACEOF
!
! fi
!
!
! # UNIX98 PTYs.
!
! for ac_func in grantpt
! do
! as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
! echo "$as_me:$LINENO: checking for $ac_func" >&5
! echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
! if eval "test \"\${$as_ac_var+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
! #line $LINENO "configure"
! #include "confdefs.h"
! /* System header to define __stub macros and hopefully few prototypes,
! which can conflict with char $ac_func (); below. */
! #include <assert.h>
! /* Override any gcc2 internal prototype to avoid an error. */
! #ifdef __cplusplus
! extern "C"
! #endif
! /* We use char because int might match the return type of a gcc2
! builtin and then its argument prototype would still apply. */
! char $ac_func ();
! char (*f) ();
!
! #ifdef F77_DUMMY_MAIN
! # ifdef __cplusplus
! extern "C"
! # endif
! int F77_DUMMY_MAIN() { return 1; }
! #endif
! int
! main ()
! {
! /* The GNU C library defines this for functions which it implements
! to always fail with ENOSYS. Some functions are actually named
! something starting with __ and the normal name is an alias. */
! #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
! choke me
! #else
! f = $ac_func;
! #endif
!
! ;
! return 0;
! }
! _ACEOF
! rm -f conftest.$ac_objext conftest$ac_exeext
! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
! (eval $ac_link) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); } &&
! { ac_try='test -s conftest$ac_exeext'
! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
! (eval $ac_try) 2>&5
! ac_status=$?
! echo "$as_me:$LINENO: \$? = $ac_status" >&5
! (exit $ac_status); }; }; then
! eval "$as_ac_var=yes"
! else
! echo "$as_me: failed program was:" >&5
! cat conftest.$ac_ext >&5
! eval "$as_ac_var=no"
! fi
! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
! fi
! echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
! echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
! if test `eval echo '${'$as_ac_var'}'` = yes; then
! cat >>confdefs.h <<_ACEOF
! #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
! _ACEOF
!
! fi
! done
!
!
! # PTY-related GNU extensions.
!
! for ac_func in getpt
! do
! as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
! echo "$as_me:$LINENO: checking for $ac_func" >&5
! echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
! if eval "test \"\${$as_ac_var+set}\" = set"; then
! echo $ECHO_N "(cached) $ECHO_C" >&6
! else
! cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
--- 12441,12457 ----
done
! # PTY-related GNU extensions.
! for ac_func in getpt
! do
! as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
! echo "$as_me:$LINENO: checking for $ac_func" >&5
! echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
! if eval "test \"\${$as_ac_var+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
! cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
***************
*** 14339,14345 ****
if test "$resolv" = yes ; then
RESOLVLIB=-lresolv
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBRESOLV 1
_ACEOF
--- 12852,12859 ----
if test "$resolv" = yes ; then
RESOLVLIB=-lresolv
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBRESOLV 1
_ACEOF
***************
*** 14469,14475 ****
echo "$as_me:$LINENO: result: $ac_cv_lib_hesiod_hes_getmailhost" >&5
echo "${ECHO_T}$ac_cv_lib_hesiod_hes_getmailhost" >&6
if test $ac_cv_lib_hesiod_hes_getmailhost = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBHESIOD 1
_ACEOF
--- 12983,12990 ----
echo "$as_me:$LINENO: result: $ac_cv_lib_hesiod_hes_getmailhost" >&5
echo "${ECHO_T}$ac_cv_lib_hesiod_hes_getmailhost" >&6
if test $ac_cv_lib_hesiod_hes_getmailhost = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBHESIOD 1
_ACEOF
***************
*** 16070,16076 ****
echo "$as_me:$LINENO: result: $emacs_cv_localtime_cache" >&5
echo "${ECHO_T}$emacs_cv_localtime_cache" >&6
if test $emacs_cv_localtime_cache = yes; then
! cat >>confdefs.h <<\_ACEOF
#define LOCALTIME_CACHE 1
_ACEOF
--- 14585,14592 ----
echo "$as_me:$LINENO: result: $emacs_cv_localtime_cache" >&5
echo "${ECHO_T}$emacs_cv_localtime_cache" >&6
if test $emacs_cv_localtime_cache = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define LOCALTIME_CACHE 1
_ACEOF
***************
*** 16153,16159 ****
fi
done
! echo "$as_me:$LINENO: checking whether gettimeofday can accept two
arguments" >&5
echo $ECHO_N "checking whether gettimeofday can accept two arguments...
$ECHO_C" >&6
if test "${emacs_cv_gettimeofday_two_arguments+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
--- 14669,14676 ----
fi
done
! if test $ac_cv_func_gettimeofday = yes; then
! echo "$as_me:$LINENO: checking whether gettimeofday can accept two
arguments" >&5
echo $ECHO_N "checking whether gettimeofday can accept two arguments...
$ECHO_C" >&6
if test "${emacs_cv_gettimeofday_two_arguments+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
***************
*** 16182,16188 ****
main ()
{
struct timeval time;
! gettimeofday (&time, 0);
;
return 0;
}
--- 14699,14705 ----
main ()
{
struct timeval time;
! gettimeofday (&time, 0);
;
return 0;
}
***************
*** 16209,16219 ****
fi
echo "$as_me:$LINENO: result: $emacs_cv_gettimeofday_two_arguments" >&5
echo "${ECHO_T}$emacs_cv_gettimeofday_two_arguments" >&6
! if test $emacs_cv_gettimeofday_two_arguments = no; then
! cat >>confdefs.h <<\_ACEOF
#define GETTIMEOFDAY_ONE_ARGUMENT 1
_ACEOF
fi
fi
--- 14726,14738 ----
fi
echo "$as_me:$LINENO: result: $emacs_cv_gettimeofday_two_arguments" >&5
echo "${ECHO_T}$emacs_cv_gettimeofday_two_arguments" >&6
! if test $emacs_cv_gettimeofday_two_arguments = no; then
!
! cat >>confdefs.h <<\_ACEOF
#define GETTIMEOFDAY_ONE_ARGUMENT 1
_ACEOF
+ fi
fi
fi
***************
*** 16600,16613 ****
fi
if test $ok_so_far = yes; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_INET_SOCKETS 1
_ACEOF
fi
if test -f /usr/lpp/X11/bin/smt.exp; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_AIX_SMT_EXP 1
_ACEOF
--- 15119,15134 ----
fi
if test $ok_so_far = yes; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_INET_SOCKETS 1
_ACEOF
fi
if test -f /usr/lpp/X11/bin/smt.exp; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_AIX_SMT_EXP 1
_ACEOF
***************
*** 16618,16624 ****
if test -d /dev/pts && ls -d /dev/ptmx > /dev/null 2>&1 ; then
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
! cat >>confdefs.h <<\_ACEOF
#define HAVE_DEV_PTMX 1
_ACEOF
--- 15139,15146 ----
if test -d /dev/pts && ls -d /dev/ptmx > /dev/null 2>&1 ; then
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_DEV_PTMX 1
_ACEOF
***************
*** 17209,17285 ****
cat >>confdefs.h <<_ACEOF
#define EMACS_CONFIGURATION "${canonical}"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define EMACS_CONFIG_OPTIONS "${ac_configure_args}"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define config_machfile "${machfile}"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define config_opsysfile "${opsysfile}"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define LD_SWITCH_X_SITE ${LD_SWITCH_X_SITE}
_ACEOF
cat >>confdefs.h <<_ACEOF
#define LD_SWITCH_X_SITE_AUX ${LD_SWITCH_X_SITE_AUX}
_ACEOF
cat >>confdefs.h <<_ACEOF
#define C_SWITCH_X_SITE ${C_SWITCH_X_SITE}
_ACEOF
cat >>confdefs.h <<_ACEOF
#define UNEXEC_SRC ${UNEXEC_SRC}
_ACEOF
if test "${HAVE_X_WINDOWS}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X_WINDOWS 1
_ACEOF
fi
if test "${USE_X_TOOLKIT}" != "none" ; then
! cat >>confdefs.h <<\_ACEOF
#define USE_X_TOOLKIT 1
_ACEOF
fi
if test "${HAVE_X11}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11 1
_ACEOF
fi
if test "${HAVE_XFREE386}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XFREE386 1
_ACEOF
fi
if test "${HAVE_MENUS}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define HAVE_MENUS 1
_ACEOF
fi
if test "${GNU_MALLOC}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define GNU_MALLOC 1
_ACEOF
fi
if test "${REL_ALLOC}" = "yes" ; then
! cat >>confdefs.h <<\_ACEOF
#define REL_ALLOC 1
_ACEOF
--- 15731,15822 ----
+
cat >>confdefs.h <<_ACEOF
#define EMACS_CONFIGURATION "${canonical}"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define EMACS_CONFIG_OPTIONS "${ac_configure_args}"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define config_machfile "${machfile}"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define config_opsysfile "${opsysfile}"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define LD_SWITCH_X_SITE ${LD_SWITCH_X_SITE}
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define LD_SWITCH_X_SITE_AUX ${LD_SWITCH_X_SITE_AUX}
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define C_SWITCH_X_SITE ${C_SWITCH_X_SITE}
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define UNEXEC_SRC ${UNEXEC_SRC}
_ACEOF
if test "${HAVE_X_WINDOWS}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X_WINDOWS 1
_ACEOF
fi
if test "${USE_X_TOOLKIT}" != "none" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define USE_X_TOOLKIT 1
_ACEOF
fi
if test "${HAVE_X11}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_X11 1
_ACEOF
fi
if test "${HAVE_XFREE386}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_XFREE386 1
_ACEOF
fi
if test "${HAVE_MENUS}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define HAVE_MENUS 1
_ACEOF
fi
if test "${GNU_MALLOC}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define GNU_MALLOC 1
_ACEOF
fi
if test "${REL_ALLOC}" = "yes" ; then
!
! cat >>confdefs.h <<\_ACEOF
#define REL_ALLOC 1
_ACEOF
***************
*** 17404,17409 ****
--- 15941,15950 ----
done
+
+
+
+
#### Report on what we decided to do.
echo "
Configured for \`${canonical}'.
***************
*** 18212,18218 ****
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
--- 16753,16759 ----
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
***************
*** 18559,18565 ****
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
--- 17100,17106 ----
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`