[debbugs-tracker] bug#25401: closed (tcc fails to build (test failure))

[GNU bug Tracking System]

Your message dated Mon, 5 Feb 2018 23:10:36 +0100
with message-id <address@hidden>
and subject line Re: tcc fails to build (test failure)
has caused the debbugs.gnu.org bug report #25401,
regarding tcc fails to build (test failure)
to be marked as done.

(If you believe you have received this mail in error, please contact
address@hidden)


-- 
25401: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=25401
GNU Bug Tracking System
Contact address@hidden with problems
> --- Begin Message ---
>
>
>
> Subject: 
>
> tcc fails to build (test failure)
>
>
>
>
> Date: 
>
> Sun, 08 Jan 2017 22:59:29 +0100
>
>
>
>
> User-agent: 
>
> mu4e 0.9.18; emacs 25.1.1
>
>
>
>
> The package “tcc” fails to build.  The check phase fails:
>
> --8<---------------cut here---------------start------------->8---
> starting phase `check'
> make -C tests test
> make[1]: Entering directory '/tmp/guix-build-tcc-0.9.26.drv-0/tcc-0.9.26/tests'
> ------------ hello-exe ------------
> ../tcc -B.. ../examples/ex1.c -o hello || (../tcc -vv; exit 1) && ./hello
> ------------ hello-run ------------
> ../tcc -B.. -run ../examples/ex1.c
> Hello World
> gcc -o libtcc_test libtcc_test.c ../libtcc.a -I..  -Wall -g -O2 
> -fno-strict-aliasing -Wno-pointer-sign -Wno-sign-compare -Wno-unused-result 
> -DCONFIG_TCC_SYSINCLUDEPATHS="\"/gnu/store/iwgi9001dmmihrjg4rqhd6pa6788prjw-glibc-2.24/include:/gnu/store/jc898psn5yc9s328nn8fya3sc2daf037-linux-libre-headers-4.4.18/include:{B}/include\""
>  
> -DCONFIG_TCC_LIBPATHS="\"/gnu/store/iwgi9001dmmihrjg4rqhd6pa6788prjw-glibc-2.24/lib\""
>  
> -DCONFIG_TCC_CRTPREFIX="\"/gnu/store/iwgi9001dmmihrjg4rqhd6pa6788prjw-glibc-2.24/lib\""
>  
> -DCONFIG_TCC_ELFINTERP="\"/gnu/store/iwgi9001dmmihrjg4rqhd6pa6788prjw-glibc-2.24/lib/ld-linux-x86-64.so.2\""
>  -DTCC_TARGET_X86_64 -lm -ldl  
> make[1]: *** [Makefile:63: hello-exe] Segmentation fault
> make[1]: *** Waiting for unfinished jobs....
> make[1]: Leaving directory '/tmp/guix-build-tcc-0.9.26.drv-0/tcc-0.9.26/tests'
> make: *** [Makefile:316: test] Error 2
> phase `check' failed after 0.2 seconds
> builder for `/gnu/store/fdy7vhwj4x7639446xai7aqh2q980xpb-tcc-0.9.26.drv' failed 
> with exit code 1
> @ build-failed /gnu/store/fdy7vhwj4x7639446xai7aqh2q980xpb-tcc-0.9.26.drv - 1 
> builder for `/gnu/store/fdy7vhwj4x7639446xai7aqh2q980xpb-tcc-0.9.26.drv' failed 
> with exit code 1
> guix build: error: build failed: build of 
> `/gnu/store/fdy7vhwj4x7639446xai7aqh2q980xpb-tcc-0.9.26.drv' failed
> --8<---------------cut here---------------end--------------->8---
>
> tcc can be used as an interpreter just fine, but the binaries it
> produces segfault immediately.
>
> --8<---------------cut here---------------start------------->8---
> (gdb) bt full
> #0  0x00000000080482a4 in _start ()
> No symbol table info available.
> (gdb) disassemble
> Dump of assembler code for function _start:
>    0x0000000008048280 <+0>:     xor    %ebp,%ebp
>    0x0000000008048282 <+2>:     mov    %rdx,%r9
>    0x0000000008048285 <+5>:     pop    %rsi
>    0x0000000008048286 <+6>:     mov    %rsp,%rdx
>    0x0000000008048289 <+9>:     and    $0xfffffffffffffff0,%rsp
>    0x000000000804828d <+13>:    push   %rax
>    0x000000000804828e <+14>:    push   %rsp
>    0x000000000804828f <+15>:    mov    $0x8048350,%r8
>    0x0000000008048296 <+22>:    mov    $0x80482e0,%rcx
>    0x000000000804829d <+29>:    mov    $0x80482ab,%rdi
> => 0x00000000080482a4 <+36>:    callq  *0x0(%rip)        # 0x80482aa <_start+42>
>    0x00000000080482aa <+42>:    hlt    
> End of assembler dump.
> --8<---------------cut here---------------end--------------->8---
>
>
> -- 
> Ricardo
>
> GPG: BCA6 89B6 3655 3801 C3C6  2150 197A 5888 235F ACAC
> http://elephly.net
>
>
>
>
> --- End Message ---
> --- Begin Message ---
>
>
>
> Subject: 
>
> Re: tcc fails to build (test failure)
>
>
>
>
> Date: 
>
> Mon, 5 Feb 2018 23:10:36 +0100
>
>
>
>
> User-agent: 
>
> Mutt/1.9.3 (2018-01-21)
>
>
>
>
> The new version 0.9.27 has been built on hydra, closing this bug.
>
> Andreas
>
>
>
> --- End Message ---