[debbugs-tracker] bug#27975: closed (guix sd 32b was not installed because of adwaita-icon-theme-3.24.0)

[GNU bug Tracking System]

Your message dated Mon, 21 Aug 2017 17:37:44 +0200
with message-id <address@hidden>
and subject line Re: bug#27975: guix sd 32b was not installed because of 
adwaita-icon-theme-3.24.0
has caused the debbugs.gnu.org bug report #27975,
regarding guix sd 32b was not installed because of adwaita-icon-theme-3.24.0
to be marked as done.

(If you believe you have received this mail in error, please contact
address@hidden)


-- 
27975: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=27975
GNU Bug Tracking System
Contact address@hidden with problems

--- Begin Message --- Subject: guix sd 32b was not installed because of adwaita-icon-theme-3.24.0 Date: Sat, 5 Aug 2017 20:54:20 +0000

I have taken pencil notes which was probably a bit broken.

I have tried to install guix sd 0.13.0 32 bit on usb key.

It broke at some file, at 78% (12.8 MiB file):
https://mirror.hydra.gnu.org/guix/nar/gzip/qs27jxbxjpvw5bv49nzw9r91hj00r12j-adaita.icon-theme-3.24.0

well that's what I have noted but this exact file cannot be retrieved.

this was followed by gzip error

I then tried to relaunch: guix system init /mnt/etc/config.scm /mnt

but this time with --failback (or --fallback?)

this time, at first I have seen it load the adwaita gzip file... but quite later, it did seems to build from source,

and this time I stop it after 25-45 mins after:

going to copy

8x8
...

256x256

Enterning directory /tmp/guix ----builds-adwaita-icon-...src/symbolic

for size in ; do \
 ...

done

for file in 'cd ../../Adwaita/scalable; find . "*.svg"'; do \
...

done

 [there I waited about 25-45 mins before doing Ctrl-C]

--- End Message ---

> --- Begin Message ---
>
>
>
> Subject: 
>
> Re: bug#27975: guix sd 32b was not installed because of adwaita-icon-theme-3.24.0
>
>
>
>
> Date: 
>
> Mon, 21 Aug 2017 17:37:44 +0200
>
>
>
>
> User-agent: 
>
> Gnus/5.13 (Gnus v5.13) Emacs/25.2 (gnu/linux)
>
>
>
>
> Hi Paul,
>
> Paul Dufresne <address@hidden> skribis:
>
> > I have taken pencil notes which was probably a bit broken.
> >
> > I have tried to install guix sd 0.13.0 32 bit on usb key.
> >
> > It broke at some file, at 78% (12.8 MiB file):
> > https://mirror.hydra.gnu.org/guix/nar/gzip/qs27jxbxjpvw5bv49nzw9r91hj00r12j-adaita.icon-theme-3.24.0
> > well that's what I have noted but this exact file cannot be retrieved.
> > this was followed by gzip error
>
> This file was 404 due to issues with ‘guix publish’ that we discovered
> and fixed last month.  This particular file is now back:
>
> --8<---------------cut here---------------start------------->8---
> $ wget -O - 
> https://mirror.hydra.gnu.org/guix/nar/gzip/qs27jxbxjpvw5bv49nzw9r91hj00r12j-adwaita-icon-theme-3.24.0
>  |gunzip -c |wc -c
> --2017-08-21 17:34:27--  
> https://mirror.hydra.gnu.org/guix/nar/gzip/qs27jxbxjpvw5bv49nzw9r91hj00r12j-adwaita-icon-theme-3.24.0
> Ni solvigas mirror.hydra.gnu.org (mirror.hydra.gnu.org)... 131.159.14.26, 
> 2001:4ca0:2001:10:225:90ff:fedb:c720
> Konektado al mirror.hydra.gnu.org (mirror.hydra.gnu.org)|131.159.14.26|:443... 
> konektita.
> HTTP peto sendita, ni atendas respondon... 200 OK
> Grando: 13428137 (13M) [application/octet-stream]
> Ni konservas al: 'STDOUT'
>
> -                            
> 100%[==============================================>]  12.81M  32.1MB/s    en 
> 0.4s    
>
> 2017-08-21 17:34:28 (32.1 MB/s) - skribita al ĉefeligujo [13428137/13428137]
>
> 28087120
> --8<---------------cut here---------------end--------------->8---
>
> > I then tried to relaunch: guix system init /mnt/etc/config.scm /mnt
> > but this time with --failback (or --fallback?)
> >
> > this time, at first I have seen it load the adwaita gzip file... but quite
> > later, it did seems to build from source,
> > and this time I stop it after 25-45 mins after:
> > going to copy
> > 8x8
> > ...
> > 256x256
> > Enterning directory /tmp/guix ----builds-adwaita-icon-...src/symbolic
> > for size in ; do \
> >  ...
> > done
> > for file in 'cd ../../Adwaita/scalable; find . "*.svg"'; do \
> > ...
> > done
> >  [there I waited about 25-45 mins before doing Ctrl-C]
>
> I’m not sure why it would hang for 45 minutes here, hard to tell.
>
> Thanks for taking the time to write this detailed report, and I hope
> you’ll eventually succeed installing GuixSD on i686.
>
> Ludo’.
>
>
> --- End Message ---