--- Begin Message ---
|
Subject: |
[PATCH 2/3] maint: use gnulib's git-version-gen instead of mkstamp. |
|
Date: |
Sun, 23 Oct 2011 23:12:13 +0700 |
This changeset stops pretending that we're doing cvs releases from two
or three branches. I also need to fix the version numbering scheme
documentation on the libtool webpages to match. We can't use letters
for alpha releases without patching the scripts, so I propose applying
this and using the following version scheme from now on:
major.minor[.micro[.patchcount-sha1fragment]]]
- major will for all intents and purposes always be 2
- minor will go up by 1 when new features are added to a release
- micro will go up by 1 when bugs are fixed compared to the last release
- .patchcount-sha1fragment comes from git describe when using an unrelaeased
build from the git repo
If you like we can still use odd vs even in the minor position to
differentiate development and bugfix releases.
I'll push in 72 hours, pending review comments, and update the versioning
webpage to match the above.
* libltdl/config/mkstamp: File removed.
* bootstrap.conf (gnulib_modules): Add git-version-gen.
* configure.ac (AC_INIT, package_revision): Use git-version-gen to
calculate version number.
(TIMESTAMP): Removed.
* libtoolize.m4sh, libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4
(TIMESTAMP): Ditto.
* Makefile.am (TIMESTAMP): Ditto.
(MKSTAMP): Renamed from this...
(git_version_gen): ...to this. Set revision here. An alpha is now a
release with an odd micro relase number.
(rebuild): Don't reset revision here.
(build_scripts): Remove mkstamp, add git-version-gen.
(EXTRA_DIST, BUILT_SOURCES): Add .version.
(libltdl/config/ltmain.sh, libltdl/m4/ltversion.m4, tests/package.m4):
Don't depend on configure.ac or ChangeLog to determine when the
version number has reved, use .version directly.
(.version): Flush most recent configure calculated VERSION to disk.
(dist-hook): Flush current VERSION to disk at dist time.
Signed-off-by: Gary V. Vaughan <address@hidden>
---
.gitignore | 1 +
ChangeLog | 23 +++++++++++++
Makefile.am | 76 +++++++++++++++++++++++++-------------------
bootstrap.conf | 1 +
configure.ac | 26 +++++----------
libltdl/config/.gitignore | 1 +
libltdl/config/ltmain.m4sh | 19 +++++------
libltdl/config/mkstamp | 48 ---------------------------
libltdl/m4/libtool.m4 | 3 +-
libtoolize.m4sh | 4 +-
10 files changed, 90 insertions(+), 112 deletions(-)
delete mode 100755 libltdl/config/mkstamp
diff --git a/.gitignore b/.gitignore
index ba06b16..188d1eb 100644
--- a/.gitignore
+++ b/.gitignore
@@ -33,6 +33,7 @@
.libs
/.pc
/.sc-start*
+/.version
/COPYING
/GNUmakefile
/INSTALL
diff --git a/ChangeLog b/ChangeLog
index 317be4d..831bbef 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,26 @@
+2011-10-20 Gary V. Vaughan <address@hidden>
+
+ maint: use gnulib's git-version-gen instead of mkstamp.
+ * libltdl/config/mkstamp: File removed.
+ * bootstrap.conf (gnulib_modules): Add git-version-gen.
+ * configure.ac (AC_INIT, package_revision): Use git-version-gen to
+ calculate version number.
+ (TIMESTAMP): Removed.
+ * libtoolize.m4sh, libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4
+ (TIMESTAMP): Ditto.
+ * Makefile.am (TIMESTAMP): Ditto.
+ (MKSTAMP): Renamed from this...
+ (git_version_gen): ...to this. Set revision here. An alpha is now a
+ release with an odd micro relase number.
+ (rebuild): Don't reset revision here.
+ (build_scripts): Remove mkstamp, add git-version-gen.
+ (EXTRA_DIST, BUILT_SOURCES): Add .version.
+ (libltdl/config/ltmain.sh, libltdl/m4/ltversion.m4, tests/package.m4):
+ Don't depend on configure.ac or ChangeLog to determine when the
+ version number has reved, use .version directly.
+ (.version): Flush most recent configure calculated VERSION to disk.
+ (dist-hook): Flush current VERSION to disk at dist time.
+
2011-10-18 Gary V. Vaughan <address@hidden>
maint: use gnulib's maint.mk and support scripts release procedure.
diff --git a/Makefile.am b/Makefile.am
index 6ed3de5..a28f108 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -51,15 +51,8 @@ LT_M4SH = $(M4SH) -B '$(m4sh_dir)'
# Using `cd' in backquotes may print the directory name, use this instead:
lt__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-MKSTAMP = '$(SHELL)' '$(aux_dir)/mkstamp'
-
-timestamp = set dummy `$(MKSTAMP) '$(srcdir)'`; shift; \
- case $(VERSION) in \
- *[acegikmoqsuwy]) TIMESTAMP=" $$1 $$2" ;; \
- *) TIMESTAMP="" ;; \
- esac
-
-rebuild = rebuild=:; $(timestamp); revision=$$1
+git_version_gen = '$(SHELL)' '$(aux_dir)/git-version-gen' '.tarball-version'
+rebuild = rebuild=:; revision=`$(git_version_gen) | sed 's,-.*$$,,g'`
# ---------- #
@@ -75,9 +68,8 @@ ltmain_m4sh = $(m4sh_dir)/ltmain.m4sh
sh_files = $(general_m4sh) $(getopt_m4sh)
build_scripts = $(aux_dir)/announce-gen $(aux_dir)/cvsu \
$(aux_dir)/do-release-commit-and-tag \
- $(aux_dir)/gendocs.sh \
+ $(aux_dir)/gendocs.sh $(aux_dir)/git-version-gen \
$(aux_dir)/gnu-web-doc-update $(aux_dir)/gnupload \
- $(aux_dir)/mkstamp \
$(aux_dir)/useless-if-before-free $(aux_dir)/vc-list-files
EXTRA_DIST += bootstrap bootstrap.conf $(build_scripts) cfg.mk maint.mk \
@@ -120,7 +112,6 @@ bootstrap_edit = $(SED) \
-e 's,@PACKAGE_STRING\@,$(PACKAGE_NAME) $(VERSION),g' \
-e 's,@PACKAGE_TARNAME\@,$(PACKAGE),g' \
-e 's,@PACKAGE_VERSION\@,$(VERSION),g' \
- -e "s,@TIMESTAMP\@,$$TIMESTAMP,g" \
-e 's,@VERSION\@,$(VERSION),g'
## ltmain.sh needs some additional editing to remove unsubstituted
@@ -137,14 +128,14 @@ ltmain_sh_edit = $(bootstrap_edit) \
## We used to do this with a 'stamp-vcl' file, but non-gmake builds
## would rerun configure on every invocation, so now we manually
## check the version numbers from the build rule when necessary.
-$(ltversion_m4): $(ltversion_in) $(configure_ac) ChangeLog
+$(ltversion_m4): $(ltversion_in) $(dotversion)
@$(rebuild); \
if test -f '$@'; then \
eval `'$(SED)' -n '/^macro_revision=/p' '$@'`; \
test x"$$macro_revision" = x"$$revision" && rebuild=false; \
fi; \
for prereq in $?; do \
- case $$prereq in *ChangeLog | *configure.ac);; *) rebuild=:;; esac; \
+ case $$prereq in *.version);; *) rebuild=:;; esac; \
done; \
if $$rebuild; then \
rm -f '$@'; \
@@ -164,14 +155,14 @@ $(ltversion_m4): $(ltversion_in) $(configure_ac) ChangeLog
## should make this rule depend on Makefile but that will break
## distcheck (at least) by rebuilding ltmain.sh in the source
## tree whenever config.status regenerates the Makefile.
-$(ltmain_sh): $(ltmain_m4sh) $(sh_files) $(configure_ac) ChangeLog
+$(ltmain_sh): $(ltmain_m4sh) $(sh_files) $(dotversion)
@$(rebuild); \
if test -f '$@'; then \
eval `'$(SED)' -n '/^package_revision=/p' '$@'`; \
test x"$$package_revision" = x"$$revision" && rebuild=false; \
fi; \
for prereq in $?; do \
- case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+ case $$prereq in *.version);; *) rebuild=:;; esac; \
done; \
if $$rebuild; then \
rm -f '$@'; \
@@ -295,14 +286,14 @@ libtoolize: $(libtoolize_in) $(config_status)
# We used to do this with a 'stamp-vcl' file, but non-gmake builds
# would rerun configure on every invocation, so now we manually
# check the version numbers from the build rule when necessary.
-libtool: $(ltmain_sh) $(config_status) ChangeLog
+libtool: $(ltmain_sh) $(config_status) $(dotversion)
@$(rebuild); \
if test -f '$@'; then \
eval `'$(SED)' -n '/^package_revision=/p' '$@'`; \
test "$$package_revision" = "$$revision" && rebuild=false; \
fi; \
for prereq in $?; do \
- case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+ case $$prereq in *.version);; *) rebuild=:;; esac; \
done; \
if $$rebuild; then \
echo '$(SHELL) ./config.status "$@"'; \
@@ -491,9 +482,37 @@ install-data-local: $(lt_Makefile_in)
## Distribution. ##
## ------------- ##
-edit_readme_alpha = $(aux_dir)/edit-readme-alpha
+edit_readme_alpha = $(aux_dir)/edit-readme-alpha
+
+dotversion = $(srcdir)/.version
+tarball_version = $(distdir)/.tarball-version
+
+## Arrange so that .tarball-version appears only in the distribution
+## tarball, and never in a checked-out repository.
+EXTRA_DIST += $(dotversion)
+BUILT_SOURCES += $(dotversion)
+$(dotversion):
+ echo '$(VERSION)' > 'address@hidden' && mv 'address@hidden' '$@'
+
+## Edit the README file for alpha releases.
EXTRA_DIST += $(edit_readme_alpha)
+re_odd_version = '\([0-9][0-9]*.[0-9][0-9]*.[0-9]*[13579]\)'
+$(readme): FORCE
+ test -n `expr $(VERSION) : $(re_odd_version)` && \
+ $(SHELL) $(edit_readme_alpha) '$@'
+
+dist-hook: $(readme)
+## Arrange so that .tarball-version appears only in the distribution
+## tarball, and never in a checked-out repository.
+ echo '$(VERSION)' > $(tarball_version)
+## Ensure aclocal has not wrongly picked up old macro definitions.
+ for macro in LT_INIT AC_PROG_LIBTOOL AM_PROG_LIBTOOL; do \
+ if grep "$$macro" '$(srcdir)/aclocal.m4' '$(lt_aclocal_m4)'; then \
+ echo "Bogus $$macro macro contents in an aclocal.m4 file." >&2; \
+ exit 1; \
+ else :; fi; \
+ done
uninstall-hook:
@$(NORMAL_UNINSTALL)
@@ -507,19 +526,6 @@ uninstall-hook:
rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
done
-dist-hook:
-## Edit the README file for alpha releases.
- case $(VERSION) in \
- *[a-z]) $(SHELL) $(edit_readme_alpha) $(distdir)/README ;; \
- esac
-## Ensure aclocal has not wrongly picked up old macro definitions.
- for macro in LT_INIT AC_PROG_LIBTOOL AM_PROG_LIBTOOL; do \
- if grep "$$macro" '$(srcdir)/aclocal.m4' '$(lt_aclocal_m4)'; then \
- echo "Bogus $$macro macro contents in an aclocal.m4 file." >&2; \
- exit 1; \
- else :; fi; \
- done
-
## ----------- ##
## Test suite. ##
@@ -630,7 +636,7 @@ INSTALLCHECK_ENVIRONMENT = \
$(testsuite): $(package_m4) $(TESTSUITE_AT) Makefile.am
$(AUTOTEST) -I '$(srcdir)/tests' $(TESTSUITE_AT) -o '$@'
-$(package_m4): $(configure_ac) Makefile.am
+$(package_m4): $(dotversion) Makefile.am
{ \
echo '# Signature of the current package.'; \
echo 'm4_define([AT_PACKAGE_NAME], address@hidden@])'; \
@@ -1018,3 +1024,7 @@ fake-distclean-legacy:
$(TESTS): $(defs)
DISTCLEANFILES += $(defs)
+
+## An empty target to depend on when a rule needs to always run
+## whenever it is visited.
+FORCE:
diff --git a/bootstrap.conf b/bootstrap.conf
index c06729d..38cd8fc 100644
--- a/bootstrap.conf
+++ b/bootstrap.conf
@@ -63,6 +63,7 @@ gnulib_modules='
announce-gen
do-release-commit-and-tag
gendocs
+ git-version-gen
gnu-web-doc-update
gnupload
maintainer-makefile
diff --git a/configure.ac b/configure.ac
index c51ec28..b2aff61 100644
--- a/configure.ac
+++ b/configure.ac
@@ -31,9 +31,11 @@ dnl Oldest automake required for bootstrap is below in
AM_INIT_AUTOMAKE.
## ------------------------ ##
## Autoconf initialisation. ##
## ------------------------ ##
-AC_INIT([GNU Libtool], [2.4.3a], address@hidden)
+AC_INIT([GNU Libtool],
+ m4_esyscmd([libltdl/config/git-version-gen .tarball-version]),
+ address@hidden)
m4_ifndef([AC_PACKAGE_URL],
- [AC_SUBST([PACKAGE_URL], [http://www.gnu.org/software/libtool/])])
+ [AC_SUBST([PACKAGE_URL], [http://www.gnu.org/s/libtool/])])
# Since we already declare these directories in this file, save those
# choices, and push the results into Makefile.am to avoid declaring
@@ -53,6 +55,8 @@ AC_CONFIG_AUX_DIR([libltdl/config])
AC_CONFIG_MACRO_DIR([libltdl/m4])
AC_CONFIG_LIBOBJ_DIR([libltdl])
+package_revision=`$SHELL $ac_aux_dir/git-version-gen .tarball-version`
+AC_SUBST([package_revision])
## ------------------------ ##
## Autotest initialisation. ##
@@ -68,20 +72,8 @@ AC_SUBST([AUTOTEST], ['$(AUTOM4TE) --language=autotest'])
## ---------------------------------------- ##
# This is a sanity check so we can see which version is used in bug reports.
-# It is assumed that we only want to see the date extension for cvs libtool
-# versions (i.e. "odd" letters) and not actual alpha releases.
-TIMESTAMP=`${CONFIG_SHELL} ${ac_aux_dir}/mkstamp ${srcdir}`
-package_revision=`( set $TIMESTAMP; echo $1; )`
-case $package_revision in
- *[[bdfhjlnprtvxz]])
- TIMESTAMP=
- ;;
-esac
-timestamp_string="${TIMESTAMP:+ (Build:$TIMESTAMP)}"
-AS_BOX([Configuring AC_PACKAGE_TARNAME$timestamp_string AC_PACKAGE_VERSION])
+AS_BOX([Configuring AC_PACKAGE_TARNAME AC_PACKAGE_VERSION])
echo
-AC_SUBST([TIMESTAMP])
-AC_SUBST([package_revision])
## ------------------------ ##
@@ -101,7 +93,7 @@ AM_INIT_AUTOMAKE([1.11.1 gnu subdir-objects dist-xz
color-tests parallel-tests])
# You can set autobuild_mode at configure time to specify a "unique"
# string for this build.
: ${autobuild_mode=default}
-AB_VERSION="AC_PACKAGE_VERSION ($TIMESTAMP)"
+AB_VERSION="AC_PACKAGE_VERSION"
AB_INIT([$autobuild_mode])
@@ -109,7 +101,7 @@ dnl We use m4sh to generate libtool's portable shell scripts
AC_SUBST([M4SH], ['$(AUTOM4TE) --language=m4sh'])
dnl Make sure config.status is regenerated when the version timestamp changes
-AC_SUBST([CONFIG_STATUS_DEPENDENCIES], ['$(top_srcdir)/ChangeLog'])
+AC_SUBST([CONFIG_STATUS_DEPENDENCIES], ['$(srcdir)/.version'])
## ------------------------------- ##
diff --git a/libltdl/config/.gitignore b/libltdl/config/.gitignore
index 3bbb989..84c6e1d 100644
--- a/libltdl/config/.gitignore
+++ b/libltdl/config/.gitignore
@@ -3,6 +3,7 @@
/depcomp
/do-release-commit-and-tag
/gendocs.sh
+/git-version-gen
/gnu-web-doc-update
/gnupload
/install-sh
diff --git a/libltdl/config/ltmain.m4sh b/libltdl/config/ltmain.m4sh
index 2641327..e8c7d51 100644
--- a/libltdl/config/ltmain.m4sh
+++ b/libltdl/config/ltmain.m4sh
@@ -1,6 +1,6 @@
m4_define([_m4_divert(SCRIPT)], 100)
m4_divert_push([SCRIPT])
-# libtool (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# libtool (GNU @PACKAGE@) @VERSION@
# Written by Gordon Matzigkeit <address@hidden>, 1996
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
@@ -71,7 +71,7 @@ m4_divert_push([SCRIPT])
# compiler: $LTCC
# compiler flags: $LTCFLAGS
# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# $progname: (GNU @PACKAGE@) @VERSION@
# automake: $automake_version
# autoconf: $autoconf_version
#
@@ -82,7 +82,6 @@ m4_divert_push([SCRIPT])
PROGRAM=libtool
address@hidden@
address@hidden@
-TIMESTAMP="@TIMESTAMP@"
address@hidden@
# Be Bourne compatible
@@ -663,7 +662,7 @@ func_write_libtool_object ()
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -2477,7 +2476,7 @@ func_generate_dlsyms ()
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation.
*/
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
@@ -3054,7 +3053,7 @@ func_emit_wrapper ()
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
@@ -3146,7 +3145,7 @@ func_parse_lt_options ()
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU
$PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE)
$VERSION\" 1>&2
fi
}
@@ -3353,7 +3352,7 @@ func_emit_cwrapperexe_src ()
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
@@ -3626,7 +3625,7 @@ EOF
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU
$PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE)
$VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -8592,7 +8591,7 @@ EOF
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
diff --git a/libltdl/config/mkstamp b/libltdl/config/mkstamp
deleted file mode 100755
index edd5be1..0000000
--- a/libltdl/config/mkstamp
+++ /dev/null
@@ -1,48 +0,0 @@
-#! /bin/sh
-
-# mkstamp - extract data from Revision and Date RCS tags in a file
-# Copyright (C) 1999, 2003 Free Software Foundation, Inc.
-# Written by Alexandre Oliva, 1999
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-####
-
-# This script takes a directory as an argument and generates a
-# revision and date based upon the ChangeLog files in that directory.
-
-# Generate a revision that looks similar to CVS revision by using 1.
-# then the number of lines in the ChangeLogs starting with dates (an
-# approximation of the number of commits) + 1000.
-# For those pulling from the savannah git repository it should be
-# possible to go from this revision number to the git revision fairly
-# easily. The number will also always increase.
-
-awk 'BEGIN {
- cocount=0;
-}
-/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9] / {
- if (cocount== 0) {
- datestr=$1
- }
- cocount++;
-}
-END {
- cocount = cocount + 1000;
- print "1." cocount " " datestr;
-}' $1/ChangeLog $1/ChangeLog.[12][0-9][0-9][0-9]
diff --git a/libltdl/m4/libtool.m4 b/libltdl/m4/libtool.m4
index 44e0ecf..00c1102 100644
--- a/libltdl/m4/libtool.m4
+++ b/libltdl/m4/libtool.m4
@@ -719,7 +719,7 @@ _LT_CONFIG_SAVE_COMMANDS([
#! $SHELL
# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building
support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
@@ -775,7 +775,6 @@ _LT_EOF
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
diff --git a/libtoolize.m4sh b/libtoolize.m4sh
index 69fd37f..1626c17 100644
--- a/libtoolize.m4sh
+++ b/libtoolize.m4sh
@@ -1,6 +1,6 @@
m4_pattern_allow([dnl])
AS_INIT[]m4_divert_push([HEADER-COPYRIGHT])
-# libtoolize (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# libtoolize (GNU @PACKAGE@) @VERSION@
# Written by Gary V. Vaughan <address@hidden>, 2003
# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
@@ -59,7 +59,7 @@ AS_INIT[]m4_divert_push([HEADER-COPYRIGHT])
# include the following information:
#
# host-triplet: @host_triplet@
-# $progname: (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# $progname: (GNU @PACKAGE@) @VERSION@
# automake: $automake_version
# autoconf: $autoconf_version
#
--
1.7.7
--- End Message ---