[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] dvdrtools on Solaris 2.6?
From: |
Duplantier, Guy (Mission Systems) |
Subject: |
[Dvdrtools-users] dvdrtools on Solaris 2.6? |
Date: |
Tue, 3 Aug 2004 06:18:08 -0700 |
Has anyone else used dvdrtools on Solaris 2.6?
I downloaded the src, dvdrtools-0.1.6, and compiled it. However, I get an
error when trying to burn a DVD. I'm using a Pioneer DVR-107, 8X on a Sparc
Ultra 10 workstation. The drive is recognized. The command I use to burn is:
"dvdrecord -v -dummy -delay 0 -dao speed=8 dev=0,2,0 foo.iso". I've also tried
setting different speeds to no avail. Please help!
Thanks,
Here's the error:
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <address@hidden <mailto:address@hidden> >
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (sparc-sun-solaris2.6) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
Warning: Using USCSI interface.
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c <mailto:'@(#)scsitransp.c> 1.81 01/04/20 Copyright
1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-107D'
Revision : '1.10'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 160 MB padsize: 30 KB
Total size: 183 MB (18:12.89) = 81967 sectors
Lout start: 184 MB (18:14/67) = 81967 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2216529
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Sending CUE sheet...
dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 1 of 160 MB written (fifo 98%).dvdrecord: I/O error. write_g1:
scsi sendcmd: no error
CDB: 2A 00 00 00 03 07 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
write track data: error after 1587200 bytes
Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00
Writing time: 31.086s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.012s
dvdrecord: fifo had 89 puts and 26 gets.
dvdrecord: fifo was 0 times empty and 14 times full, min fill was 96%.
- [Dvdrtools-users] dvdrtools on Solaris 2.6?,
Duplantier, Guy (Mission Systems) <=