[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Dvdrtools-users] Sony DRU-500A DVD-RW - command sequence error
From: |
Scott Prive |
Subject: |
RE: [Dvdrtools-users] Sony DRU-500A DVD-RW - command sequence error |
Date: |
Thu, 24 Oct 2002 09:59:33 -0400 |
Hi,
I might be telling you something you already know, if so don't be offended ;-)
When you say you had a "successful" burn, but the DVD Video player does not
recognize it... there can be more than one way to fail in a DVD Video player,
so I am curious as to how you determined it's the disk?
It very well might be the drive cannot read DVD+RW (in fact it's most likely),
but the other possibility is the "authoring" is somehow noncompliant.
I say this because I once made a DVD-R that played on the computer DVD
software, but not on the Video Player. It turned out I had illegal pointers in
the IFO files, which the computer didn't care about but the standalone player
did. There are, of course, other ways to confuse a DVD Video Player (lowercase
files, etc). Video players don't seem to have "real" filesystem support, and
make many assumptions about file structure.
All reports seem to be that DVD+RW/+R is less compatible than DVD-R -- and I'm
convinced of this myself -- but before you conclude the format cannot be read,
you might want to test some more.
Two tests I can think of:
1) Do a 1:1 disk copy of something that plays on your DVD player.
2) Author again to DVD+R. On EITHER side of the DVD "format war", the
write-once media have higher compatibility.
Hope this helps,
Scott
> -----Original Message-----
> From: Jussi-Pekka Sairanen [mailto:address@hidden
> Sent: Wednesday, October 23, 2002 11:02 PM
> To: address@hidden
> Subject: [Dvdrtools-users] Sony DRU-500A DVD-RW - command
> sequence error
>
>
>
> Hi,
>
> So I rushed to Fry's to get me a Sony DRU-500A. With dvd+rw-tools I
> managed to burn a DVD+RW succesfully. However, my DVD player doesn't
> recognise DVD+RW so my preferred format would probably be DVD-RW.
>
> Burning DVD-RW failed. Befor any bits get written I get an
> error message:
>
>
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid)
>
>
> Is there something I've overlooked? The disk is not formatted, I read
> someplace that it is not needed with DVD-RW. How would you do
> it anyway?
>
>
>
> Here's the whole output.
>
>
> linux /home/jps# dvdrecord -packet -v speed=2 dev=0,0,0
> video/jp/mp3.iso
> dvdrtools - based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001
> Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'DVD RW DRU-500A '
> Revision : '1.0c'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 4718592 = 4608 KB
> linux /home/jps# dvdrecord -dao -v speed=2 dev=0,0,0 /video/jp/mp3.iso
> dvdrtools - based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001
> Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'DVD RW DRU-500A '
> Revision : '1.0c'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 4718592 = 4608 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 834 MB
> Total size: 958 MB (95:00.05) = 427504 sectors
> Lout start: 959 MB (95:02/04) = 427504 sectors
> Current Secsize: 2048
> ATIP start of lead in: -150 (00:00/00)
> Disk type: unknown
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 2298496 Blocks current: 2298496 Blocks
> remaining: 1870992
> Starting to write CD/DVD at speed 1 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds.
> Operation starts.
> Waiting for reader process to fill input buffer ... input
> buffer ready.
> trackno=0
> BURN-Free is ON.
> Performing OPC...
> Sending CUE sheet...
> Starting new track at sector: 427670
> Track 01: 0 of 834 MB written.dvdrecord: Input/output
> error. write_g1:
> scsi sendcmd: no error
> CDB: 2A 00 00 06 86 96 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.005s timeout 200s
>
> write track data: error after 0 bytes
> Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
> Writing time: 11.121s
> Fixating...
> Fixating time: 0.001s
> dvdrecord: fifo had 64 puts and 1 gets.
> dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
>
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
>