[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] HP 200j
From: |
Schuler Robert W CRBE |
Subject: |
[Dvdrtools-users] HP 200j |
Date: |
Tue, 8 Oct 2002 16:08:40 -0400 |
Please help. I have installed an HP 200j DVD Burner under Red Hat
Linux GYRO 2.4.18-3 #1 Thu Apr 18 07:37:53 EDT 2002 i686 unknown
I cannot seem to burn a DVD.
I can burn and erase CD-RW disks.
I installed Red Hat 7.3 in hopes of getting new drivers, but still I cannot
burn a DVD.
The DVD burner is an IDE device and works OK under Windoze.
When I run dvdrecord -scanbus, I get:
address@hidden rschuler]# dvdrecord -scanbus
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus1:
1,0,0 100) 'HP ' 'DVD Writer 200j ' '1.06' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
So next I try to burn a small ISOFS.raw file to the DVD:
address@hidden root]# dvdrecord dev=1,0,0 cdimage.raw
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HP '
Identifikation : 'DVD Writer 200j '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
dvdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 11 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
dvdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 240s
address@hidden root]#
I have also found the diagnostic from XCDRoast to be interresting.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Schilling
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HP '
Identifikation : 'DVD Writer 200j '
Revision : '1.06'
Device seems to be: Generic mmc CD-RW.
Drive capabilities, per page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does read DVD-ROM media
Does not read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does not support BURN-Proof (Sanyo)
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data
Does play audio CDs
Number of volume control levels: 15
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does support digital output on port 2
Does not send digital data LSB-first
Does not set LRCK high for left-channel data
Does not have valid data on falling edge of clock
Length of data in BCLKs: 16
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed in kB/s: 5645
Current read speed in kB/s: 5764
Maximum write speed in kB/s: 2117
Current write speed in kB/s: 2051
Buffer size in KB: 2048
Bottom line is I can't burn, and don't know how to proceed. Any help will be
greatly appreciated.
Rob Schuler
- [Dvdrtools-users] HP 200j,
Schuler Robert W CRBE <=