[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] PyBOMBS install GRC and UND errors on Ubuntu 18.04
From: |
John_w_g |
Subject: |
[Discuss-gnuradio] PyBOMBS install GRC and UND errors on Ubuntu 18.04 |
Date: |
Tue, 02 Oct 2018 18:05:05 +0000 |
I have installed GRC and UHD via PyBOMBS on Ubuntu 18.04. I am working with a Ettus x310. I cab successfully run uhd_usrp_probe launch GRC that finds the SDR correctly. I wrote a simple GRC program that creates a tone, sends it to the transmitter ad then through a loopback to the receiver for display in the Qt display as an initial functional test. When I launch GRC via
PyBOMBs run gnuradio-companion
I get the attached warnings and errors output in the console.
The system displays on the frequency plot only a small -100 dBm tone at 0-Hz no matter
what RX and Tx gain settings I use. I assume this is LO leakage. GRC continually outputs 'Gt" error codes in the console. When I attempt to end GRC it will hang and I have to force it to close. I have attached the console output when I launch GRC
Any input on what I need to modify/change to get this working properly would be greatly appreciated.
John Garnham
GRC_error_out_in_terminal
Description: Binary data
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] PyBOMBS install GRC and UND errors on Ubuntu 18.04,
John_w_g <=