|
From: | Derek Kozel |
Subject: | Re: [Discuss-gnuradio] GNU Radio not installing: Build Failed |
Date: | Fri, 8 Jun 2018 16:15:51 +0100 |
Derek, this was much appreciated and seems to have fixed my problems on Centos 7.A note about the C++11 mandatory changes that would help me (and probably others). There are a lot of us who have been forced into using Centos 7 and their so very antiquated tools. Ubuntu's newer tools (probably cmake) are smart enough to know to switch to c++11 because of the need in the source code. Centos doesn't appear to be smart enough to do that, and so even though we can build the c++11 code if the tools that are installed if we hand-touched the source with some mods, the system wasn't smart enough to do it on its own.So my hope is that there might be something you can do in the recipes or gnuradio itself that would force the Centos tools to use c++11 (it appears that some mods to the CMakeLists.txt file like I mentioned in my other thread might be enough (and it shouldn't heart the Ubuntu users any).Anyway, thanks for the temporary rollback!--------- Original Message ---------
Hello Curt,The fix for this issue was merged into the GNU Radio master branch last night. Thank you for posting the PR and describing your solution here. The 3.8 release is going to raise the minimum version requirements of an appreciable number of dependencies in order to make sure that GNU Radio development can keep moving forward smoothly. C++11 will be mandatory on master at some time before that release occurs, but today isn't here quite yet.Thanks,Derek
On Fri, Jun 8, 2018 at 2:11 AM, Curt Corum <address@hidden> wrote:
Mir and Jason,
I've been working through something similar and have found a solution.
Please see the github issue: https://github.com/gnuradio/
pybombs/issues/502 and below.-Curt
Dear pybombs team and community,
Had issues with building gnuradio-default on relatively clean but up to date Ubuntu 16.04 LTS. Seems related to https://www.mail-archive.com/
address@hidden/ https://www.mail-archive.com/msg66739.html address@hidden/ #424 #448msg66739.html $ pybombs --version
2.3.2$ gcc --version
gcc (Ubuntu 6.4.0-17ubuntu1~16.04) 6.4.0 20180424It was necessary to do the following to get the gnuradio-default recipe to build thrift, boost, uhd and gnuradio without errors:
>sudo apt-get install g++-6 >sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-6 60 --slave /usr/bin/g++ g++ /usr/bin/g++-6 >sudo update-alternatives --config gcc
and setting gcc-6 to default
uninstall most of boost 1.58 binary packages (all but non -dev distribution packages)
adding the following to gnuradio-default.lwr# gnuradio-default.lwr #binary boost linking fails *** CAC boost: forcebuild: True
and modifying config.yml (directly as could not figure out how to escape -std=c++-11 for pybombs config --env)
# config.yml env: CXXFLAGS: -std=c++11 -fext-numeric-literals
and modifying boost.lwr
# boost.lwr satisfy: deb: libboost-all-dev >= 1.6 || libboost-dev >= 1.6 rpm: (boost-devel >= 1.6) || (boost_1_61-devel >= 1.6) || (boost_1_64-devel >= 1.6) || (boost_1_65-devel >= 1.6) pacman: boost >= 1.6 port: boost >= 1.6 portage: dev-libs/boost >= 1.6
Wanted to make sure this got captured as it took several days to resolve and seems to be an ongoing issue.
-Curt
On 06/07/2018 11:00 AM, address@hiddenorg wrote:Message: 5 Date: Thu, 7 Jun 2018 15:13:38 +0100 From: Mir Muhammad Lodro <address@hidden> To: address@hidden Subject: [Discuss-gnuradio] GNU Radio not installing: Build Failed Message-ID: <CADtuR2KTY=2kYH_UqKsScyk-=STgdfd2aqA=Ks6gOOEkpF6kQw@ Content-Type: text/plain; charset="utf-8" Hi All i am installing GNU Radio on Linux 16.04, but it's not installing by saying this file requires compiler and library support for ISO 2011 standard. This can be done by issuing -std=c++11 or -std=gnu++11 when one has to run single file. But here the build process is automated. I would be grateful if you can look into the following prompt response and guide what could be the possible solution. I have already installed GNU Radio on different machine running 16.04, but I am surprise to see the error when installing on another machine and despite repeating the very same steps. The as it as prompt response is: address@hidden:/home/eexmmlo# pybombs prefix init -a default prefix/default/ -R gnuradio-default PyBOMBS - INFO - PyBOMBS Version 2.3.2 PyBOMBS.prefix - WARNING - There already is a prefix in `/home/eexmmlo/prefix/default'mail.gmail.com> . Continue using this path Y/[N]? y Alias `default' already exists, overwrite Y/[N]? y PyBOMBS.prefix - INFO - Installing default packages for prefix... PyBOMBS.prefix - INFO - - gnuradio PyBOMBS.install_manager - INFO - Phase 1: Creating install tree and installing binary packages: Install tree: | \- gnuradio PyBOMBS.install_manager - INFO - Phase 2: Recursively installing source packages to prefix: PyBOMBS.install_manager - INFO - Installing package: gnuradio PyBOMBS.Packager.source - WARNING - Build dir already exists: /home/eexmmlo/prefix/default/ src/gnuradio/build Building: (100%) [============================= ============================== ============================== ========================] [ 4%] Built target volk_obj [ 4%] Built target volk [ 4%] Built target volk_test_all [ 4%] Built target volk_profile [ 5%] Built target volk-config-info [ 6%] Built target pygen_volk_python_volk_ modtool_34493 [ 6%] Built target pygen_volk_python_volk_ modtool_04eb6 [ 7%] Built target pmt_generated [ 7%] Built target gnuradio-pmt [ 10%] Built target gnuradio-runtime [ 11%] Built target test-gnuradio-runtime [ 11%] Built target gr_runtime_test [ 11%] Built target test-gnuradio-pmt [ 11%] Built target gr_pmt_test [ 11%] Built target gnuradio-config-info [ 11%] Built target pmt_swig_swig_doc [ 11%] Built target _pmt_swig_swig_tag [ 11%] Built target pmt_swig_gnuradio_runtime_ swig_7dd5e [ 11%] Built target _pmt_swig [ 11%] Built target runtime_swig_swig_doc [ 11%] Built target pmt_swig [ 11%] Built target _runtime_swig_swig_tag [ 11%] Built target runtime_swig_gnuradio_runtime_ swig_7dd5e [ 11%] Built target _runtime_swig [ 11%] Built target pygen_gnuradio_runtime_swig_ bc893 [ 12%] Built target pygen_gnuradio_runtime_swig_ c7096 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_0cff0 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_gr_c39fa [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_gru_e77e9 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_20832 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_c0e39 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_2dcdd [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_a87ad [ 13%] Built target pygen_gnuradio_runtime_python_ pmt_5fb7b [ 13%] Built target pygen_gnuradio_runtime_ examples_mp_sched_be1cd [ 13%] Built target pygen_gnuradio_runtime_ examples_network_14cb6 [ 13%] Built target pygen_gnuradio_runtime_ examples_volk_benchmark_0f7b0 [ 14%] Built target blocks_generated_includes [ 14%] Building CXX object gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o In file included from /usr/include/c++/5/cstdint:35: 0, from /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:30: /usr/include/c++/5/bits/c++0x_ warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options. #error This file requires compiler and library support \ ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:32:14: error: ?int64_t? does not name a type static const int64_t MAX_INT = INT32_MAX; ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:33:14: error: ?int64_t? does not name a type static const int64_t MIN_INT = INT32_MIN; ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc: In function ?void float_array_to_int(const float*, int*, float, int)?: /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:39:5: error: ?int64_t? was not declared in this scope int64_t r = llrintf(scale * in[i]); ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:40:9: error: ?r? was not declared in this scope if (r < MIN_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:40:13: error: ?MIN_INT? was not declared in this scope if (r < MIN_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:42:18: error: ?MAX_INT? was not declared in this scope else if (r > MAX_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:44:31: error: ?r? was not declared in this scope out[i] = static_cast<int>(r); ^ gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/build. make:4635: recipe for target 'gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o' failed make[2]: *** [gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o] Error 1 CMakeFiles/Makefile2:2171: recipe for target 'gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/all' failed make[1]: *** [gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/all] Error 2 Makefile:160: recipe for target 'all' failed make: *** [all] Error 2 PyBOMBS.Packager.source - ERROR - Build failed. See output above for error messages. PyBOMBS.Packager.source - ERROR - Problem occurred while building package gnuradio: Build failed. PyBOMBS.install_manager - ERROR - Error installing package gnuradio. Aborting. Regards, Mir Lodro -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gnu.org/archive/ html/discuss-gnuradio/ ------------------------------ Message: 6 Date: Thu, 07 Jun 2018 07:30:27 -0700 From: "Jason Matusiak" <address@hiddenattachments/20180607/427cb3c6/ attachment.html> com> To: "Jose Ruvalcaba" <address@hidden> Cc: "GNURadio Discussion List" <address@hidden> Subject: Re: [Discuss-gnuradio] install issue with c++11 Message-ID: <20180607073027.ba066092a6e013ef68fa4f5a8d80e9 Content-Type: text/plain; charset="utf-8" OK, here is where everything stands. I have made some headway, but it is still not 100% solved yet. I found some misnamed nomenclature in the ettus wiki on how pybombs installs and muddled through some things to get gr-blocks to finish building. I still cannot get this all to work automagically, but I am hoping someone can see a way, or we can patch pybombs in such a way to make it happen. First - The flag in the config.yml is not "env" like the wiki states, but "setup_env". This seems to be a sub-setting to the config portion of the config.yml files. The setup_env flag seems to want to source a file, so what I did was put a path to a file in there that contains my command. The tail of the config.yml mod looks like this: - config: setup_env: /home/me/Downloads/flag My file "flag", contains the one line "export CXXFLAGS=-std=c++11" (minus the quotes of course). So now when the build process starts (via a regular pybombs install), UHD builds fine as always, and gnuradio start fine, then barfs on gr-blocks (the first place that requires ++11). I know the environment flag took because I see it in one of the commands it is trying to run and fails on (below is an example of one of the failing commands: [ 27%] Building CXX object gr-blocks/lib/CMakeFiles/address@hidden godaddy.com> gnuradio-blocks.dir/max_ss_ impl.cc.o cd /opt/gnuradio/v3.7.12.0_blah/ src/gnuradio/build/gr-blocks/ lib && /usr/local/bin/c++ -DENABLE_GR_LOG -DGR_CTRLPORT -DGR_PERFORMANCE_COUNTERS -DHAVE_ARPA_INET_H -DHAVE_BYTESWAP_H -DHAVE_COSF -DHAVE_LINUX_PPDEV_H -DHAVE_LOG4CPP -DHAVE_MALLOC_H -DHAVE_NETDB_H -DHAVE_NETINET_IN_H -DHAVE_SELECT -DHAVE_SIGNAL_H -DHAVE_SINCOS -DHAVE_SINCOSF -DHAVE_SINF -DHAVE_SYS_IPC_H -DHAVE_SYS_MMAN_H -DHAVE_SYS_SELECT_H -DHAVE_SYS_SHM_H -DHAVE_SYS_SOCKET_H -DHAVE_SYS_TIME_H -DHAVE_SYS_TYPES_H -DHAVE_UNISTD_H -Dgnuradio_blocks_EXPORTS -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/build/ gnuradio-runtime/include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/gnuradio- runtime/include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/build -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/build/volk/ include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/volk/include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/build/gr- blocks/include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/build/gr- blocks/lib -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/gr-blocks/ include -I/opt/gnuradio/v3.7.12.0_ blah/src/gnuradio/gr-blocks/ lib -std=c++11 -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -O2 -g -DNDEBUG -fPIC -std=gnu++98 -o CMakeFiles/gnuradio-blocks. dir/max_ss_impl.cc.o -c /opt/gnuradio/v3.7.12.0_blah/ src/gnuradio/build/gr-blocks/ lib/max_ss_impl.cc And you can see that it contains "-std=c++11" (that isn't present if I don't do a setup_env in the yml file, so I know pybombs is reading things properly) followed by the normal (for the pybombs install) command "-std=gnu++98" a couple of commands later. This will fail with the normal complaint about needing ++11. The interesting thing is, if I do a find and replace, and swap the order of those two flags within all files in src/gnuradio/build/gr-blocks, things build happily. So what gives? I can't seem to find a good way to override the ++98. A workaround is to change the order of those two flags so that the ++11 command comes after it if they are both going to be there, but I can't seem to get that to work either. Anyone have any ideas? I don't mind adding additional export commands to my "flag" file, but I haven't found one yet that seems to make a darn to the issue. I have almost gone as far as I can take it. --------- Original Message --------- Subject: Re: [Discuss-gnuradio] install issue with c++11 From: "Jose Ruvalcaba" <address@hidden> Date: 6/5/18 7:44 pm To: "Linda20071" <address@hidden> I encountered this issue but seemed to fix it by updating my gcc compiler from 5.4.0 to 6.4. However, after I did this I encountered another problem with the uhd drivers which I opened on a separate thread :( . I got the instructions on how to update the gcc compiler from the following youtube video: https://www.youtube.com/watch? v=vVzshfYSgRk . Hope this information is of any help. On Tue, Jun 5, 2018 at 4:27 PM, Linda20071 <address@hidden> wrote: Is there a good book for an "overview of C++11/14" so somebody with a very good background in c++ can grasp the main idea quickly? Examples in a programming overview book can always help! Thanks in advance! On Tue, Jun 5, 2018 at 2:39 PM, Jason Matusiak <address@hiddencom> wrote: Does anyone have experience with this? I am having trouble figuring out if it is not working, or if I am not doing something right. The config.yml looks like this when fresh: !!omap - categories: hardware: forcebuild: true common: forcebuild: true - packages: gnuradio: forcebuild: true gqrx: forcebuild: true I then added the line: - config: env: export CXXFLAGS:STRING="-std=c++11" to the end of it. I don't think that that is the right way to do it, but CXXFLAGS="-std=c++11" didn't work either (no "export" or ":STRING"). Also tried just straight: - env CXXFLAGS: "-std=c++11" Any ideas? Check out https://github.com/gnuradio/pybombs#configuring-a-prefix- . You might be able to set CXXFLAGS with the `--env` flag On Tue, Jun 5, 2018 at 10:36 AM Dave NotTelling <address@hidden> wrote: I would suspect that PyBombs doesn't care about your env variables. That or it overwrites the CMAKE_CXX_FLAGS at some point. I have no idea how PyBombs builds the CMake projects. If it's not calling the `cmake` command directly, then it likely will not pick up the env variable. On Tue, Jun 5, 2018 at 10:33 AM Philip Balister <address@hidden> wrote: On 06/05/2018 10:06 AM, Marcus D. Leech wrote: > On 06/05/2018 09:07 AM, Jason Matusiak wrote: >> Thanks Dave, but that did not seem to work for me. Here were the >> commands I ran (slightly different than recommended, but that was for >> some different recipe mods that have nothing to do with this issue): >> >> $ export CXXFLAGS="-std=c++11" >> $ PREFIX=/opt/gnuradio/v3.7.12.0 >> $ yes | pybombs prefix init $PREFIX >> $ yes | pybombs -p $PREFIX recipes add gr-recipes >> git+https://github.com/environment-eg-for-cross- compiling gnuradio/gr-recipes.git >> $ source /opt/gnuradio/v3.7.12.0/setup_env.sh >> $ pybombs -vvv -p $PREFIX install gnuradio >> >> And currently things keep erroring out at the same place while >> installing UHD: >> >> [ 43%] Building CXX object >> lib/CMakeFiles/uhd.dir/usrp/ dboard/magnesium/magnesium_ radio_ctrl_impl.cpp.o >> >> [ 43%] Building CXX object >> lib/CMakeFiles/uhd.dir/usrp/ dboard/magnesium/magnesium_ radio_ctrl_init.cpp.o >> >> c++: internal compiler error: Killed (program cc1plus) >> Please submit a full bug report, >> with preprocessed source if appropriate. >> See <http://bugzilla.redhat.com/ bugzilla> for instructions. >> make[2]: *** >> [lib/CMakeFiles/uhd.dir/usrp/dboard/magnesium/magnesium_ radio_ctrl_init.cpp.o] >> Error 4 >> make[2]: *** Waiting for unfinished jobs.... >> >> I've also tried env CXXFLAGS=-std=c++11, but it had the same issues. >> > That error is internal to the compiler, it is failing to perform its job > correctly. This has nothing to do with Gnu Radio, per se, or PyBombs > or any of that. This ordinarily means you compiler is broken in some > way. > > HOWEVER. How much memory do you have on the system? Run dmesg and look for messages from the OOM killer (Out of Memory) Philip > > This issue used to happen on systems with small physical memory, because > compiling certain things requires a lot of virtual memory > on the part of the compiler. > > >> >> Jason, >> You can set the CXXFLAGS env variable to "-std=c++11" and any >> CMake builds you run (assuming the same shell) will check the >> CXXFLAGS var first. This assumes that you don't overwrite the >> value of CMAKE_CXX_FLAGS. I just tried it in a terminal with >> `export CXXFLAGS="-std=c++11"`, then `cmake ..`, and finally >> `VERBOSE=1 make -j 1`. The verbose make command will show you if >> your flags are taking or not. >> -Dave >> >> On Tue, Jun 5, 2018 at 8:00 AM Jason Matusiak >> <address@hidden >> <mailto:jason@ gardettoengineering.com> > wrote: >> >> I am trying to install gnuradio onto a Centos 7 box and am >> having more and more issues with packages that use c++11 >> commands. For some of the packages, I add the line: >> CMAKE_CXX_FLAGS "-std=c++11" >> to the module's CMakeLists.txt file. >> The issue is that that requires a fetch, the mod, and then a >> rebuild. This worked OK with it was just gqrx I was doing it >> for, but now I need it for other modules it appears, and so I >> am trying to find a more elegant solution that covers >> everything that is built via a pybombs install gnuradio >> command (like gr-blocks, which I can't use this trick for). >> If I understand the problem correctly, Ubuntu uses new enough >> tools to realize that it needs to use the c++11 version (or >> newer I assume) to build since it is needed. It seems like >> even though Centos 7 has the c++11 capability, it does not >> smartly trying to use it, and must be directed to for the >> installs to work. >> Is there something I can do at an upper level to make things >> happy on an install? >> _______________________________________________ >> Discuss-gnuradio mailing list >> address@hidden <mailto:address@hidden org> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> address@hidden >> https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio > > > > > _______________________________________________ > Discuss-gnuradio mailing list > address@hidden > https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gnu.org/archive/html/discuss-gnuradio/ ------------------------------ Message: 7 Date: Thu, 7 Jun 2018 11:19:59 -0400 From: Dave NotTelling <address@hidden> To: address@hidden Cc: GNURadio Discussion List <address@hidden> Subject: Re: [Discuss-gnuradio] GNU Radio not installing: Build Failed Message-ID: <CAK6GVuPkvi+GudoLdXx8oNEE_attachments/20180607/d98541db/ attachment.html> JqV_=EOew-GuFQk_t2uiR7p9g@ Content-Type: text/plain; charset="utf-8" Check out the thread titled: install issues with c++11. I think you two are having the same issue with PyBombs and C++11 On Thu, Jun 7, 2018 at 10:16 AM Mir Muhammad Lodro <address@hidden> wrote:mail.gmail.com> Hi All i am installing GNU Radio on Linux 16.04, but it's not installing by saying this file requires compiler and library support for ISO 2011 standard. This can be done by issuing -std=c++11 or -std=gnu++11 when one has to run single file. But here the build process is automated. I would be grateful if you can look into the following prompt response and guide what could be the possible solution. I have already installed GNU Radio on different machine running 16.04, but I am surprise to see the error when installing on another machine and despite repeating the very same steps. The as it as prompt response is: address@hidden:/home/eexmmlo# pybombs prefix init -a default prefix/default/ -R gnuradio-default PyBOMBS - INFO - PyBOMBS Version 2.3.2 PyBOMBS.prefix - WARNING - There already is a prefix in `/home/eexmmlo/prefix/default'. Continue using this path Y/[N]? y Alias `default' already exists, overwrite Y/[N]? y PyBOMBS.prefix - INFO - Installing default packages for prefix... PyBOMBS.prefix - INFO - - gnuradio PyBOMBS.install_manager - INFO - Phase 1: Creating install tree and installing binary packages: Install tree: | \- gnuradio PyBOMBS.install_manager - INFO - Phase 2: Recursively installing source packages to prefix: PyBOMBS.install_manager - INFO - Installing package: gnuradio PyBOMBS.Packager.source - WARNING - Build dir already exists: /home/eexmmlo/prefix/default/ src/gnuradio/build Building: (100%) [============================= ============================== ============================== ========================] [ 4%] Built target volk_obj [ 4%] Built target volk [ 4%] Built target volk_test_all [ 4%] Built target volk_profile [ 5%] Built target volk-config-info [ 6%] Built target pygen_volk_python_volk_ modtool_34493 [ 6%] Built target pygen_volk_python_volk_ modtool_04eb6 [ 7%] Built target pmt_generated [ 7%] Built target gnuradio-pmt [ 10%] Built target gnuradio-runtime [ 11%] Built target test-gnuradio-runtime [ 11%] Built target gr_runtime_test [ 11%] Built target test-gnuradio-pmt [ 11%] Built target gr_pmt_test [ 11%] Built target gnuradio-config-info [ 11%] Built target pmt_swig_swig_doc [ 11%] Built target _pmt_swig_swig_tag [ 11%] Built target pmt_swig_gnuradio_runtime_ swig_7dd5e [ 11%] Built target _pmt_swig [ 11%] Built target runtime_swig_swig_doc [ 11%] Built target pmt_swig [ 11%] Built target _runtime_swig_swig_tag [ 11%] Built target runtime_swig_gnuradio_runtime_ swig_7dd5e [ 11%] Built target _runtime_swig [ 11%] Built target pygen_gnuradio_runtime_swig_ bc893 [ 12%] Built target pygen_gnuradio_runtime_swig_ c7096 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_0cff0 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_gr_c39fa [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_gru_e77e9 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_20832 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_c0e39 [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_2dcdd [ 13%] Built target pygen_gnuradio_runtime_python_ gnuradio_ctrlport_a87ad [ 13%] Built target pygen_gnuradio_runtime_python_ pmt_5fb7b [ 13%] Built target pygen_gnuradio_runtime_ examples_mp_sched_be1cd [ 13%] Built target pygen_gnuradio_runtime_ examples_network_14cb6 [ 13%] Built target pygen_gnuradio_runtime_ examples_volk_benchmark_0f7b0 [ 14%] Built target blocks_generated_includes [ 14%] Building CXX object gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o In file included from /usr/include/c++/5/cstdint:35: 0, from /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:30: /usr/include/c++/5/bits/c++0x_ warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options. #error This file requires compiler and library support \ ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:32:14: error: ?int64_t? does not name a type static const int64_t MAX_INT = INT32_MAX; ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:33:14: error: ?int64_t? does not name a type static const int64_t MIN_INT = INT32_MIN; ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc: In function ?void float_array_to_int(const float*, int*, float, int)?: /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:39:5: error: ?int64_t? was not declared in this scope int64_t r = llrintf(scale * in[i]); ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:40:9: error: ?r? was not declared in this scope if (r < MIN_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:40:13: error: ?MIN_INT? was not declared in this scope if (r < MIN_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:42:18: error: ?MAX_INT? was not declared in this scope else if (r > MAX_INT) ^ /home/eexmmlo/prefix/default/ src/gnuradio/gr-blocks/lib/ float_array_to_int.cc:44:31: error: ?r? was not declared in this scope out[i] = static_cast<int>(r); ^ gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/build. make:4635: recipe for target 'gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o' failed make[2]: *** [gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/float_ array_to_int.cc.o] Error 1 CMakeFiles/Makefile2:2171: recipe for target 'gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/all' failed make[1]: *** [gr-blocks/lib/CMakeFiles/ gnuradio-blocks.dir/all] Error 2 Makefile:160: recipe for target 'all' failed make: *** [all] Error 2 PyBOMBS.Packager.source - ERROR - Build failed. See output above for error messages. PyBOMBS.Packager.source - ERROR - Problem occurred while building package gnuradio: Build failed. PyBOMBS.install_manager - ERROR - Error installing package gnuradio. Aborting. Regards, Mir Lodro ______________________________ _________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gnu.org/archive/html/discuss-gnuradio/ ------------------------------ Subject: Digest Footer ______________________________attachments/20180607/ede199b4/ attachment.html> _________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/ listinfo/discuss-gnuradio ------------------------------ End of Discuss-gnuradio Digest, Vol 188, Issue 9 ************************************************
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |