From: Dirk Gorissen
Date: Thu, 3 May 2018 22:25:09 +0100
Hello,
Im using an airspy mini through the osmosdr block. I would like
control over the 3 gains the airspy has (IF, Mixer, LNA) but the
osmossdr block does not seem to expose this. Is there a workaround?
The C++ and Python interfaces look like they support setting them:
https://github.com/osmocom/gr-osmosdr/blob/master/include/osmosdr/source.h#L185
https://github.com/osmocom/gr-osmosdr/blob/master/lib/source_impl.h#L59
https://github.com/osmocom/gr-osmosdr/blob/master/lib/source_impl.cc#L667
https://github.com/osmocom/gr-osmosdr/blob/master/lib/source_iface.h#L165
https://github.com/osmocom/gr-osmosdr/blob/master/lib/airspy/airspy_source_c.h#L108
https://github.com/osmocom/gr-osmosdr/blob/master/lib/airspy/airspy_source_c.cc#L533
but the GRC file for the GUI block doesn't appear to let you call these
from GRC.
Workaround:
In the Python script generated by GRC, you should be able to make the
following calls where appropriate:
# Turn off hardware AGC
source_block_instance.set_gain_mode(False, 0)
# Set gains
source_block_instance.set_gain(desired_lna_gain, 'LNA', 0)
source_block_instance.set_gain(desired_mix_gain, 'MIX', 0)
source_block_instance.set_gain(desired_if_gain, 'IF', 0)
The proper fix, is to fix this GRC block XML generator script to
present a tab for input of named gains, and to add callbacks for those
named gains:
https://github.com/osmocom/gr-osmosdr/blob/master/grc/gen_osmosdr_blocks.py
Regards,
Andy
Cheers
Dirk
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio